Rights Reserved. Zound Industries International AB is hereinafter referred to as “Zound Industries” or “manufacturer”.
• MARSHALL, Marshall Amps, their respective logos, “Marshall” and “Marshall” trade dress are trademarks and intellectual property of Marshall
Amplication PLC and may not be used without permission. Permission granted to Zound Industries.
• Android™, Google Play™ and Chromecast™ are trademarks of Google Inc.
• Apple, AirPlay, iPod, iPhone, iPad, iTunes and the Apple and AirPlay logos are trademarks of Apple Inc., registered in the U.S. and other
countries.
• Spotify
• The Spotify
• The
• Wi-Fi
®
and the Spotify Connect® logos are trademarks of the Spotify® Group, registered in the U.S. and other countries.
®
software is subject to third party licenses found here: https://developer.spotify.com/esdk-third-party-licenses.
Bluetooth
is under license.
®
®
word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by Zound Industries
is a registered trademark of Wi-Fi Alliance®.
• All other trademarks are the property of their respective owners and may not be used without permission.
• “Made for iPod”, “Made for iPhone”, and “Made for iPad”, mean that an electronic accessory has been designed to connect specically to
iPod, iPhone, or iPad, respectively, and has been certied by the developer to meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with the iPod,
iPhone, or iPad may affect wireless performance.
DISCLAIMER
Please note that the availability of third party services, including but not limited to Chromecast built-in™, AirPlay®, Spotify®, and this device’s
compatibility with the same, is subject to the respective rights holder’s consent, which may be withdrawn, and supply of such services, which may
be terminated, resulting in this device not being compatible with such third party services, without any liabilities for Zound Industries.
The availability of third party services may need separate agreements between you and any third party and Zound Industries do not take
responsibility for the availability of such services.
For more legal information related to this Marshall device and for information related to Zound Industries, visit the website:
http://www.marshallheadphones.com
002.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
• This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated
“dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock.
• Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to
qualied personnel.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
instructions in the literature accompanying the product.
1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the product and in the operating instructions should be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this product near water – The product should not be used near water or moisture – for example, in a wet basement or near a
swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
9. (US plug only) Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than
the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit
from the product.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the product. When a cart or rack is used, use
caution when moving the cart/product combination to avoid injury from tip-over.
13. Unplug this product during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied personnel. Servicing is required when the product has been damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not
operate normally, or has been dropped.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety
connection to electrical earth.
WARNING
• To reduce the risk of re or electric shock, do not expose this product to rain or moisture. The product shall not be exposed to dripping or
splashing and objects lled with liquids, such as vases, shall not be placed on product.
• The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
003.
INSTALLATION & CONNECTION
• Connect the product according to the instructions in this manual.
• Connect the product only to the correct mains voltage as shown on the product.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit the
product.
• Use only power cables of the type specied in these operating instructions or as marked on the product.
• Do not defeat the safety purpose of the polarized or grounding-type plug.
• If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
• Unplug the product during lightning storms or when unused for long periods of time.
• Do not install this product in a conned or a built-in space. Only install the product in a well ventilated and open location. The ventilation should
not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
• No naked ame sources, such as lighted candles, should be placed on the product.
CLEANING & MAINTENANCE
Refer all servicing to qualied service personnel. Servicing is required when the product has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Clean only with dry cloth.
DISPOSAL & RECYCLING INFORMATION
This product may not be treated as regular household waste. Management of WEEE (Waste Electrical and Electronic Equipment) is applicable in
member states of the European Union and other European countries with individual national policies on the management of WEEE. If you need more
information on the collection, reuse and recycling systems, please contact your local or regional waste administration facility.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To comply with FCC’s and Industry Canada’s RF radiation exposure limits for general population/uncontrolled exposure, this device must be installed
to provide a separation distance of at least 20cm from all persons.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
WARNING: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference
with and/or damage this device. No conguration controls are provided for this wireless equipment allowing any change in the
frequency of operations outside the FCC grant of authorization for US operation according to Part 15.407 of the FCC rules.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
004.
IC STATEMENT
This device complies with RSS247 of Industry Canada.
Cet appareil se conforme à RSS247 de Canada d’Industrie.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are
safe for intended operation as described in this manual.
The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
Déclaration d’exposition aux radiations : Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les Etats-Unis et le
Canada établies pour un environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l’appareil peut
être conservé aussi loin que possible du corps de l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle
fonction est disponible.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B)
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum
shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
Pour empêcher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit être utilisé a l’intérieur et devrait être placé loin
des fenêtres an de fournir un écran de blindage maximal. Si le matériel (ou son antenne d’émission) est installé à l’extérieur, il
doit faire l’objet d’une licence.
Notice for 5 GHz devices
Caution: (i) The device for operation in the band 5150 - 5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250 - 5350 MHz and
5470 - 5725 MHz shall comply with the e.i.r.p. limit: and (iii) the maximum antenna gain permitted for devices in the band 5725 - 5825 MHz shall
comply with the e.i.r.p. limits specied for point-to-point and non point-to-point operation as appropriate. (iv) Users should
also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250 - 5350 MHz and 5650 - 5850 MHz and
that these radars could cause interference and/or damage to LE-LAN devices.
Exposure of humans to RF elds (RSS-102)
The computers employ low gain integral antennas that do not emit RF eld in excess of Health Canada limits for the general population; consult
Safety Code 6, obtainable from Health Canada’s Web site at http://www.hc-sc.gc.ca/
The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding
IC RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended operating positions accepted by the FCC/ RSS with the device
transmitting at its highest certied power level in all tested frequency band without distance attaching away from the body. Non-compliance with
the above restrictions may result in violation of FCC RF exposure guidelines.
Conformité des appareils de radiocommunication aux limites d’exposition humaine aux radiofréquences (CNR-102)
L’ordinateur utilise des antennes intégrales à faible gain qui n’émettent pas un champ électromagnétique supérieur aux normes imposées par
Santé Canada pour la population.
Consultez le Code de sécurité 6 sur le site Internet de Santé Canada à l’adresse suivante: http://www.hc-sc.gc.ca/ L’énergie émise par les
antennes reliées aux cartes sans l respecte la limite d’exposition aux radiofréquences telle que dénie par Industrie Canada dans la clause 4.1
du document CNR-102, version 5. Tests DAS sont effectués en utilisant les positions recommandées par la FCC/CNR avec le téléphone émet à
la puissance certiée maximale dans toutes les bandes de fréquences testées sans distance attacher loin du corps. Non-respect des restrictions
ci-dessus peut entraîner une violation des directives de la FCC/CNR.
DECLARATION OF CONFORMITY
005.
Hereby, Zound Industries International AB, declares that this product is in compliance with the
essential requirements and other relevant provisions of Radio Equipment Directive (RED) 2014/53/EU
and the RoHS directive 2011/65/EU.
For the declaration of conformity, visit this website: http://www.marshallheadphones.com
INDEX
ENGLISH
SECTIONS
PAGE
002. LEGAL & TRADEMARK NOTICE
003. IMPORTANT SAFETY INSTRUCTIONS
004. INSTALLATION & CONNECTION
004. CLEANING & MAINTENANCE
004. DISPOSAL & RECYCLING INFORMATION
004. FCC STATEMENT
005. IC STATEMENT
005. DECLARATION OF CONFORMITY
007. BOX CONTENTS
008. GENERAL DESCRIPTION
010. PLUGGING IN THE STANMORE MULTI-ROOM
011. SETTING UP THE SPEAKER
012. MANY WAYS TO CONNECT
013. CONNECTING VIA Bluetooth® (PAIRING)
014. CONNECTING VIA AUX OR RCA
015. AUX INPUT - 3.5 mm STEREO PLUG
016. RCA INPUT - RCA PORTS
017. SELECTING THE SOUND SOURCE
018. Wi-Fi® STREAMING WITH SPOTIFY
019. Wi-Fi STREAMING FROM AirPlay
020. Wi-Fi STREAMING FROM Chromecast built-in
021. Wi-Fi STREAMING FROM INTERNET RADIO
022. STORING PRESETS
023. SINGLE MODE OR MULTI MODE
024. MULTI MODE
025. PLAY, PAUSE, NEXT AND PREVIOUS SONG
026. ADJUSTING THE VOLUME/BASS/TREBLE
027. STANDBY MODE
®
028. SPEAKER SOFTWARE UPDATE
029. FACTORY RESET
030. TECHNICAL INFORMATION
031. TROUBLESHOOTING
006.
BOX CONTENTS
001.
MARSHALL STANMORE MULTI-ROOM ACTIVE STEREO LOUDSPEAKER
002. QUICK START GUIDE
003. IMPORTANT SAFETY INSTRUCTIONS
004. POWER CORD
001.
002.
003.
007.
004.
GENERAL DESCRIPTION
001. AUX INPUT FOR 3.5 mm STEREO PLUG
002. SINGLE/MULTI MODE BUTTON AND INDICATORS
003. VOLUME KNOB
004. BASS KNOB
005. TREBLE KNOB
006. SOURCE KNOB
007. PREVIOUS SONG BUTTON
008. NEXT SONG BUTTON
001.
002.
003.
004.
005.
006.
008.
007.
008.
GENERAL DESCRIPTION CONTINUED
1
6
009. BACKPLATE
010. BASS PORT
011. RCA INPUT (LEFT & RIGHT)
012. POWER JACK
013. POWER CORD
009.
010.
011.
LE
SING
2
3
RCA
AUX
4
5
7
AUX
MU
I
LT
009.
NOTE: DATE CODE AND
SERIAL NUMBER STICKER
LOCATED HERE.
012.
013.
PLUGGING IN THE STANMORE MULTI-ROOM
1
6
IMPORTANT: BEFORE PROCEEDING TO STEP 001. BELOW, CHECK THE
INCLUDED POWER CORD, POWER PLUG AND YOUR STANMORE MULTI-ROOM
SPEAKER ARE COMPATIBLE WITH YOUR MAINS ELECTRICITY SUPPLY AND
ASSOCIATED WALL SOCKET.
001. INSERT THE POWER CORD INTO THE POWER JACK ON THE BACK OF
THE SPEAKER.
002. CONNECT THE POWER PLUG TO THE WALL SOCKET.
003. CONTINUE WITH THE SETUP IF THE SPEAKER HAS NOT YET BEEN
CONFIGURED.
CAUTION: ALWAYS UNPLUG THE POWER
CORD FROM THE WALL SOCKET BEFORE
DISCONNECTING IT FROM THE SPEAKER.
A
RC
AUX
001.
7
002.
SINGLE
2
3
4
5
AUX
I
MULT
010.
SETTING UP THE SPEAKER
BEFORE USING YOUR MARSHALL MUTI-ROOM SPEAKER, CONFIGURE IT FOR
Wi-Fi® WITH THE GOOGLE HOME APP. USE THE MARSHALL MULTI-ROOM APP
TO GET THE MOST OUT OF YOUR SPEAKER, ADD PRESETS, PLAY INTERNET
RADIO AND MUCH MORE.
001. DOWNLOAD THE GOOGLE HOME APP AND FOLLOW THE IN-APP
INSTRUCTIONS TO SET UP YOUR SPEAKER.
002. DOWNLOAD THE MARSHALL MULTI-ROOM APP AND FOLLOW THE
IN-APP INSTRUCTIONS TO CUSTOMISE YOUR SPEAKER.
NOTE: AFTER THE SETUP, THE STANMORE MULTI-ROOM IS
CONNECTED TO A Wi-Fi NETWORK. THE SPEAKER IS CONTROLLED
FROM EITHER THE MARSHALL MULTI-ROOM APP, Spotify
MUSIC APPS OR SIMPLY BY CLICKING AND TURNING THE KNOBS
ON TOP OF THE SPEAKER.
DOWNLOAD ON THE
®
, OTHER
001.
GOOGLE HOME
002.
MARSHALL MULTI-ROOM
011.
NOTE: UNTIL THE SPEAKER IS CONFIGURED FOR
Wi-Fi, IT IS DISCOVERABLE AND READY TO BE SET
UP FROM THE GOOGLE HOME APP.
Loading...
+ 24 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.