Marsh TDH110 User Manual

TD2100 Manual Gummed Tape Dispenser

Owner’s Manual

1

40974 Rev. 08-25-2015

A wall-socket must be close to the product and readily accessible.

The overall system is protected against overload by the branch circuit
protection in accordance with the current edition of the NEC or CEC

Table of Contents

Introduction ..................................................................................................................................... 3

Warranty Information ..................................................................................................................... 4

Specifications .................................................................................................................................. 5

Setup Instructions............................................................................................................................ 6

Operating Instructions ..................................................................................................................... 9

Maintenance .................................................................................................................................... 9

Troubleshooting ............................................................................................................................ 12

Parts List ....................................................................................................................................... 13

2

40974 Rev. 08-25-2015

Introduction

Congratulations on the purchase of your new MARSH TD2100 Gummed Tape Dispenser from
MSSC, LLC. We are confident you will be very pleased with the operation and performance of
this durable, quality built machine for many years to come.

The TD2100 Gummed Tape Dispenser Owner’s Manual provides the necessary information
about the operation and maintenance of your new tape dispenser.

The Setup section was designed to be simplistic in the basic setup of the machine to allow you to
quickly get the machine up and running to do what it was designed to do… Dispense Gummed
Tape quietly, quickly and accurately.

The Operating section provides information on the operation of the machine.

The Maintenance Section provides information about required care and maintenance of the
machines and further adjustments if required for your particular use.

This owner’s manual provides a Troubleshooting section to help you with possible operating
problems and corrective actions. Should you require replacement parts, please refer to the Parts
List.

Should you need assistance, or if you would like to obtain information about any Marsh product,
contact your Marsh distributor or MSSC, LLC at:

3

40974 Rev. 08-25-2015

Warranty Information

MSSC, LLC warrants that your selling distributor will repair, replace, or adjust components
found to be defective in factory materials or workmanship for a period of 18 months. Your
Marsh distributor will provide free service for ninety (90) days from the beginning of the
warranty period. The warranty period begins on the original installation date as indicated on
your on-line warranty registration.

Conditions of warranty:

1. Properly regulated electrical power that is free of surges and spikes must be provided
for electrical equipment.

2. Operating personnel must be properly instructed on use of machine.

3. Maintenance procedures must be observed – see Owner’s Manual.

4. Use only approved Marsh accessories and replacement parts.

5. Warranty must be validated by MSSC, LLC. If no warranty is submitted, coverage
begins on the date of shipment from MSSC, LLC.

Exclusions: Damage due to tampering, abuse, improper adjustments, use of non-approved
components or electrical interference will not be covered by the warranty.

4

40974 Rev. 08-25-2015