MBF 6000
MBF 6010
Medical Body Fat Scale
Please keep the instruction manual at hand all the time for future reference.
1
TABLE OF CONTENTS
TABLE OF CONTENTS........................................................................... 2
PREFACE................................................................................................... 3
GENERAL INFORMATION.................................................................... 3
NOTES ON SAFETY................................................................................. 3
ENVIROMENTAL..................................................................................... 3
MAINTENANCE....................................................................................... 4
WARRANTY-LIABILITY ........................................................................ 4
DISPOSING OF THE SCALE.................................................................. 4
SPECIFICATION ...................................................................................... 7
SPECIFICATION ...................................................................................... 8
PRODUCT STRUCTURE ........................................................................ 9
PRODUCT STRUCTURE ...................................................................... 10
PANEL AND KEY FUNCTION...............................................................11
PANEL AND KEY FUNCTION..............................................................12
DISPLAY................................................................................................... 13
BEFORE OPERATION........................................................................... 14
SETTING TIME AND DATE................................................................... 15
OPERATION INSTUCTION Body Composition Analysis ..................... 16
OPERATION INSTUCTION Body Composition Analysis ..................... 17
SET UP YOUR DEVICE......................................................................... 19
RS-232 INTERFACE INSTRUCTIONS................................................ 20
FORMAT OF THE PRINT OUT............................................................ 21
ASSEMBLY INSTRUCTION................................................................. 22
INSTRUCTION FOR REPLACING BATTERIES.............................. 24
MBF-6010 ASSEMBL Y........................................................................... 25
ERROR MESSAGE................................................................................. 26
2
PREFACE
Thank you for choosing our product. All features of this product were designed to state of the art and are
optimized for simple and straightforward use. If you have any query or experience any problem not
addressed in the operating instructions, please contact our sales / service people.
GENERAL INFORMATION
We strongly recommend you use this device on flat and hard surface. Any soft surface, like carpet will
cause inaccuracy.
NOTES ON SAFETY
Danger:
Never use this unit in combination with medical electronic devices such as:
Medical electronic implants such as pacemakers.
Electronic life support systems such as an artificial heart/lung.
Portable electronic medical devices such as an electrocardiograph.
This unit may cause the above mentioned medical electronic devices to malfunction.
Caution:
Before putting the device into use, please read with care the information given in the Operating
Instructions. They contain important instructions for installation, proper use and maintenance of the
device.
The manufacturer shall not be liable for damages arising out of failure to heed the following instructions:
When using electrical components under increased safety requirements, always comply with the
appropriate regulations.
Improper installation will render the warranty null and void.
Ensure the voltage marked on the power supply unit matches your main power supply.
This device is designed for use indoors.
Observe the permissible ambient temperatures for use
The device meets the requirements for electromagnetic compatibility. Do not exceed the maximum
values specified in the applicable standards.
If you have any problem, please contact our sales / service people.
ENVIROMENTAL
All batteries contain toxic compounds; disposal of batteries should be delegated to a competent
organization, complying with the deposit of Poisonous Waste Regulation 1972.
3
Please do not incinerate batteries.
The optimum operating temperature for the scale is 5℃ to +35℃; although it will operate at higher
and lower temperatures the scales battery life will adversely be effected.
MAINTENANCE
The scale does not require any routine maintenance. However, we recommend checking the
scale’s accuracy at regular intervals. The regularity of these checks is dependent on the level of
use and the state of the scale. If any inaccuracies occur, please contact our sales / service people.
WEIGHING OPERATION
Before reading detailed instructions on how to use all the weighing functions that are built into your
scale, please read the following important guidelines:
Always be sure that the display shows `0.0` before use, if it does not then please press the ZERO
key.
The device is designed to detect when a stable weight is achieved, the indicator will `bleep` twice
to indicate a stable weight value, your reading should be taken at this point.
WARRANTY-LIABILITY
If a fault or defect is present on receipt of the unit which is within our scope of responsibility, we
shall have the right to either repair the fault or supply a replacement unit. Replaced parts shall be
the property of CHARDER. Should the fault repairs or replacement delivery not be successful,
the statutory provisions shall be valid. The period of warranty shall be two years, beginning on the
date of purchase. Please retain your receipt as proof of purchase. Should your scale require
servicing, please contact.
No responsibility shall be accepted for damage caused through any of the following reasons:
Unsuitable or improper storage or use, incorrect installation or commissioning by the owner or third
parties, natural wear, changes or modifications, incorrect or negligent handling, overuse, chemical,
electrochemical or electrical interference or humidity, unless this is attributable to negligence on
the part of manufacturer.
If operating, climatic or any other influences lead to a major change in conditions or material quality,
the treaty for perfect unit functioning shall be rendered null and void. If we provide and individual
warranty, this means that the unit supplied will be free of faults for the length of the warranty period.
DISPOSING OF THE SCALE
This product is not to be treated as regular household waste, but should be handed into an
electrical/electronic equipment recycling centre.
You can obtain further details from your local council, your municipal waste Disposal Company or
4
the firm which you purchased the product.
WARNING
Individuals with a Pacemaker or Other Internal Medical Devices
This equipment sends a weak electrical current through the body during
measurement. Individuals who have internally implanted medical devices,
such as Pacemakers, should not use this equipment due to the risk of
malfunction to the device that may be caused by the weak electrical current.
Inserting and Removing the Power Cord
To reduce the risk of electric shock or product damage, never insert or remove
the power cord with wet hands.
Do not under any circumstances dismantle or alter the device, as this could
result in electric shock or injury as well as adversely affect the precision of
measurements.
To prevent fire hazard
Use only a correctly wired (100-240VAC) outlet, and do not use a multiple
outlet extension cable.
Measurements for physically disabled persons.
Physically disabled persons should not attempt to take measurements alone,
but instead should have their caretakers assist them in using the device.
Keep the unit out of the reach of young children.
CAUTION
Cross Contamination
The Body Composition Analyzer should be used with bare feet. Please be sure
to clean the scale platform with appropriate disinfectant after each use. Never
pour any liquid directly on the scale platform, as it may leak and cause internal
damage. Use a soft cloth and appropriate ethyl alcohol to wipe off platform. Do
not wipe the platform with strong chemicals.
Clean
We would recommend using alcohol based wipes or similar when cleaning the
scales.
Please do not use large amounts of water when cleaning the scales as this will
cause damage to the scales electronics, you should also refrain from using
corrosive liquids or high pressure washers.
5
Always disconnect the scales from the mains power supply before cleaning.
Interpretation of Results
The data provided by this machine, as well as any supplementary information
such as diet or exercise programs based on this data, should be interpreted by
a licensed professional.
Please make sure you place the Weighing Platform on a level and stable
surface. If the equipment is used when the Weighing Platform is unstable
because not all feet are on the surface, there may be a risk of stumbling or
inaccurate measurement.
Never jump on the Weighing Platform, there may be a risk of stumbling and
malfunction of the equipment.
For the MBF-6000; ensure you use the original AC adapter. Using an AC
adapter other than the original one may cause malfunction.
Do not insert or remove the plug by the cable.
Maintenance
Since this equipment is accurately manufactured and adjusted, please observe the
following instructions.
Never disassemble the equipment as this may cause malfunction. Users must
not disassemble or adjust this equipment.
Unplug the unit from the wall outlet when it will not be in use for long periods of
time.
Keep the electrodes clean by wiping them with disinfectant.
Do not drop the unit, and avoid locations with constant vibration.
Do not put this equipment in direct sunlight, close to heaters or near direct
draughts from air conditioners.
6
SPECIFICATION
Model MBF 6000 MBF 6010
Weight
Measurement
Impedance
Measurement
Capacity
Weight Unit
LCD Display
Key Functions
Accuracy
Measurement
System
Measurement
Current
Measurement
Style
Measurement
Range
300kg x 0.1kg
kg (approval)
0.8 inch LCD display (Three row LCD)
ON/OFF, ZERO, PRE-TARE, BODY TYPE
0~9,CLEAR, ENTER, TIME ,PRINT
±0.15kg
4 polar Bioelectrical Impedance Analysis
50kHz 500uA
Right leg, Left leg
200 ~ 1000Ω / 0.1Ω
Input Items
Gender
Body Type
Age
Height
Male / Female
Standard / Athletic
10 ~80 years old
60 ~ 210cm / 2ft ~ 7ft 11.0in
7
SPECIFICATION
Output Items
(Display and
Print out)
Date
Body Type
Gender
Age
Height
Weight
BMI
BMR
FAT%
Fat Mass
FFM
TBW
DD/MM/YYYY hh:mm
EX: 30/10/2008 10:55
Standard / Athletic
Male / Female
10 ~ 80 years old / 1 year increments
60 ~ 210cm / 2ft ~ 7ft 11.0in
0 ~ 300kg
0.1 increments
1 kcal increments
5 ~ 50% / 0.1% increments
0.1kg increments
0.1kg increments
0.1kg increments
Platform Dimension
Power Supply
Operation Temperature &
Humidity
Storage Temperature &
Humidity
OPTION
RS232
450(L) X 340(W) X 88(H) mm
7.2V 2000mA rechargeable battery or
AA (1.5X6) 9V batteries.
Medical Switch AC adapter 12V 2A
5 ~35 3℃℃ 5% / 90% RH
-20℃~60℃ 25% / 95 % RH
(without condensation)
THERMAL PRINT/Height meter
9D CONNECT (FEMAL) FOR PC
8
PRODUCT STRUCTURE
A: Remote indicator
B: Digital LCD
C: Control Panel
D: Posterior Electrodes
E: Platform
F: Adjustable feet
G: Battery Type
E
D
A B
F
G
C
9
PRODUCT STRUCTURE
A
D
E
B C
A: Indicator
B: Digital LCD
C: Control Panel
D: Posterior Electrodes
E: Platform
F: Adjustable feet
G: Battery Type
10
F
G
PANEL AND KEY FUNCTION
Key Function
1. ON/OFF: Power on or power off.
2. ZERO: Zero the system.
3. PRE-TARE: Deduct the weight of clothing before measuring .
TIME: Setting time and date.
4. CLEAR: Press this key to return normal mode.
5. PRINT: When printer or PC is connected to the scale, press this
key to print patient’s weight, height, body type, age, FAT, BMI,
FAT MASS, BMR, TBW, and FFM
11
PANEL AND KEY FUNCTION
6. ENTER: In setting function mode, this key means,” enter”. In
normal mode, this key means “down”.
7. 0-9: Press numeral keys while setting the height and weight.
8. BODY TYPE:
: Standard - Male.
: Standard - Female.
: Athletic.
Note. To select the appropriate body type
We defines “Athletic” as a person involved in intense physical activity of at least 12
hours per week and who has a resting heart rate of approximately 60 beats per
minute or less. Our athletic definition does not include “enthusiastic beginners”
who are making a real commitment to exercising at least 12 hours per week but
whose bodies have not yet changed to require the Athletic mode.
12
DISPLAY
13
BEFORE OPERATION
1. Install Rechargeable battery pack in the battery box of indicator or
plug the connector of AC ADAPTER (12V 2A) in the indicator.
2. Assemble the cable to the printer, then connecting its 9D
connector to the indicator.
3. Make sure the paper is installed in the printer.
14
SETTING TIME AND DATE
t
y
f
y
f
y
f
1. Press ON/OFF key, switch on
the scale.
2. Press TIME key, entering the
DATE / TIME SETTING MENU.
“Year” of last record will be
displayed at the top LCD; the 1
digit will be flash.
3. Change the flash digits b
pressing the numerical key o
control panel.
4. Press TIME key, entering DATE
menu.
5. Change the flash digits b
pressing the numerical key o
control panel.
6. Press TIME key, entering TIME
menu.
7. Change the flash digits b
pressing the numerical key o
control panel.
Format of display:
-- YEAR: YYYY
-- DATE: MM.DD
-- TIME: HR: MIN.
8. Press TIME key to save the
setting. LCD displays the
updated data by the sequence
of YEAR, DATE, and TIME.
Return to the weighing mode.
s
15
OPERATION INSTUCTION Body Composition Analysis
t
t
f
y
r
1. Press ON/OFF key. “0.0” will
appear on the top LCD.
2. Connecting the TP-2100 Printer to
the scale by the cable supplied in
the packaging of printer.
Turn on the printer by pressing the
I/O switch button which is built at the
rear of printer.
3. Press PRE-TARE key. Input the
weight of your clothes. A minus
weight will be display at the top LCD.
4. Select the body type by pressing
one of the
buttons.
5. Press ENTER key, entering setting
mode of personal data. A heigh
number will be displayed and flash
st
at the 1
by pressing the numerical key o
control panel, or automaticall
transferred from the HM-201D
height measurement.
digits. Input your heigh
6. Press ENTER key, an age numbe
displayed and flash at the 1stdigits.
Input your age.
16
OPERATION INSTUCTION Body Composition Analysis
w
f
r
r
t
7. Press ENTER key, a flashing arro
appears next to STEP ON.
8. Step on the four electrodes o
platform with bare feet. Stand in a
stable position without bending you
knees.
9. Weight will be displayed on the top
LCD, then
and digits running one by one at the
bottom for few seconds.
10. BMI and fat% displayed.
11. Press “Print” button of printer, the
measurement result will be print ou
(refer to page 15 for the sample).
Tear it from the printer.
will appea
17
12. Press the ENTER key to
switch the monitor of bottom
LCD between Height, age
and BMI, fat%.
13. Press CLEAR key, return to
the weighing mode.
P.S.: The following data will be printed on the paper of printer:
BMI, FAT%, FAT MASS, FFM, BMR, TBW, AND IMPEDANCE.
18
SET UP YOUR DEVICE
When the scale is switched on, hold the [ZERO] key pressed for
about 3 seconds until the display shows successively the „SETUP”
and „A.OFF” symbols.
Selection is carried out with the [TARE] and [HOLD]
keys.
AUTO-OFF TIME SETUP
This enables operator to setup period to shut off device with no
operation automatically.
When the „End” is selected, the setting can be finished with the
[HOLD] key.
19
RS-232 INTERFACE INSTRUCTIONS
SPECIFICATIONS
Communication Standard EIA RS-232 Compatible
Communication Method
Asynchronous Transmission
Signal speed
Data length
Parity Check
Stop bit
Handshake
Data Code
9600
8 bits
None
1 bit
None
ASCII
SIGNAL LINES AND CONNECTION METHODS
Terminal number Signal name
2
3
5
TX
RX
GND
RS232 Connector
Use an RS-232 cross cable when connecting to a personal computer
or printer (TP-2100).
20
FORMAT OF THE PRINT OUT
BODY TYPE ST ANDARD
GENDER MALE
AGE 40
HEIGHT 170.2 cm
PRE-TARE 0.0 kg
NET WEIGHT 70.0 kg
BMI 24.7
FAT% 21.0 %
FAT MASS 14.7 kg
FFM 55.3 kg
BMR 1660 kcal
TBW 40.6 kg
IMPEDANCE 402.2ohm
MBF-6000
31/03/2009 14:55
21
ASSEMBLY INSTRUCTION
To install the HM-201D with the MBF-6000
The connection point between the MBF-6000 indicator and HM-201D
is illustrated below:
Digital Height Measure data cable socket on MBF-6000 Indicator:
Insert the HM201D data cable into the socket of MBF-6000 Indicator
before use.
22
Body impedance measurement methods
In the conventional 4-electrode method, current is supplied from the
electrodes at the tips of the toes on both feet, with the voltage
measured on the heel. This current flows from one lower limb
through the lower abdomen and then into the other lower limb, and
the bio electrical impedance (hereinafter, impedance,) thus
measured is the impedance between the two feet. For reference, the
impedance measurement methods for the legs are shown in the
diagram below.
23
INSTRUCTION FOR REPLACING BATTERIES
1. Open the battery housing cover, and take out the battery housing.
Reset the rechargeable battery. Make sure the rechargeable battery is
properly placed.
2. Place the battery housing back and make sure that the housing pin is
connecting to the right point
3. Place the housing back, and close the battery housing cover.
24
MBF-6010 ASSEMBLY
1. Put the column on the base.
2. Screw up the column and base.
25
ERROR MESSAGE
26
27
Contact of Sales and after service:
FREEPHONE: 0800 169 2775
HEAD OFFICE:
SALES, SERVICE,
MARKETING
AND ACCOUNTS
Telephone:
Fax:
NORTHERN OFFICE:
DESPATCH,
PRODUCTION AND
TECHNICAL SUPPORT
Telephone:
Fax:
Anvil House
Tuns Lane
Henley On Thames
Oxon
RG9 1SA
0845 130 7330
0845 130 7440
Unit 7
Centurion Business Park
Coggin Mill Way
Rotherham
S60 1FB
01709 364296
01709 364293
28
Manufacturer’s Declaration of Conformity
This product has been manufactured in accordance with
the harmonized
European standards, following the provisions of the below
stated directives:
93/42/EEC as amended by 2007/47/EC
Please see separate document showing on sticker of device for
above CE marking.
Authorized EU Representative:
Medical Device Directive
2009/23/EC
Non-automatic Weighing Instruments
Directive
Manufactured by:
IN-1193 【11069A】 01/2011
Charder Electronic Co., Ltd.
No.103, Guozhong Rd., Dali Dist.,
Taichung City 412, Taiwan (R.O.C.)
29
Loading...