Marsal & Sons MFW-1 User Manual
& s o n s , i n c .
HEAT LAMPS
Marsal Heat Lamps utilize halogen bulbs for both heat and
illumination. Our units are manufactored in custom built sizes to fit any
location.
Marsal Heat Lamps are composed of a
stainless steel body and aluminum
reflector. Our unique design creates an
even heat pattern over the entire length of the unit which maintains
peak flavor without continuous cooking or drying.
Model No. MFW 1, 2, 3, & 4
(Model number indicates the number of bulb per unit)
Electrical Requirements: 110 VAC - 60 HZ Single Phase
www.marsalsons.comsee back for specifications
HEAT LAMPS
MODEL
LENGTH DIMENSIONS
AMPERAGE
MFW -1
18” - 30 ”
4.5 AMPS MAX
MFW -2
31” - 48 ”
9.0 AMPS MAX
MFW -3
49” - 65 ”
13.6 AMPS MAX
MFW -4
66” - 96 ”
18.0 AMPS MAX
(uses two switches)
3.37"
server view
3.5"
bottom view
SPECIFICATIONS
Removable Electrical
Connection Plate
MFW-1: 18-30"
MFW-2: 31-48"
MFW-3: 49-65"
MFW-4: 66-96"
175 East Hoffman Ave. Lindenhurst, NY. 631-226-6688 FAX: 631-226-6890 www.marsalsons.com
120 VAC Single Phase
NOTE: Model number indicates number of light bulbs.
i.e. Model MFW-3 has three light bulbs.
& s o n s , i n c .
Copyright ©2006 Marsal & Sons, Inc. All designs and specifications presented in this document are subject to change without notice due to constant innovation.
Loading...