MARS SERIES 954, SERIES 730 Catalog Page
Maintenance Products
MARS SERIES 954 & 730
E-Z Break®Anti-Seize Compound
• Copper-based anti-seize and lubricating compound
• Resists rust and corrosion
• Recommended for coating nuts, bolts, valves, flanges, splines, for easy
break out after years of service
• Meets Mil. Spec. Mil-A-907E
• Authorized by USDA for use in federally inspected meat and poultry plants
• Temperature: to 1800
MARS
NO.
95472 10 oz. w/brushcap 24 24
°
F (982° C)
DESCRIPTION
MARS
PACK
Pierce®Rust Remover Penetrant
• Drives under rust and penetrates into the tightest crevices to protect against
rust and corrosion
• Removes asphalt, tar, grease, dirt from metal surfaces
• Colorless moisture repellent film guards against continuing rust and corrosion
• Use on all euipment tools, chain saws, cables, ignition systems, threaded
parts, and any rotating or sliding metal surfaces.
• Lubricates and eliminates squeaks
MARS
NO.
95423 12 oz. aerosol w/extension 24 24
DESCRIPTION
MARS
PACK
Spray Weld
All-in-one cleaner, primer & cement in a handy aerosol can.
SERVICE & INSTALLATION
• Valve sprays in any angle, even when can is upside down!
• Commercial grade fast-setting, heavy-bodied, CFC's free aerosol propellant
• 11 oz. can yields up to 300 - 3/4" joints. That's over 100 more joints than
a quart can of traditional brush-on cement!
• All-weather formula works Hot or Cold, Wet or Dry
• Sets in 1-2 minutes!
• Pressure test to 100 PSI in as little as 30 minutes!
For use on:
SDR 35CL200, Schedules 20, 40 & 80 up to 6" dia
.
95423
95472
CASE
QTY.
CASE
QTY.
73010
73011
MARS NO. DESCRIPTION MARS PACK
73010 Clear 12
73011 Purple 12
Permatex®Adhesives & Sealants
Permatex®PermaPoxy™ 5 Minute General Purpose Epoxy and 30
Minute High Strength General Purpose Epoxy
• Versatile easy to use, clear appearance, 2 part adhesive and filler system.
No need to weld or braze
• Fills gaps and will not shrink
• Temperature range -60°F to 180°F (-51°C to 82°C).
• 5 min. general purpose epoxy - permanent strength up to 3400 PSI
• 30 min high strength - permanent strength up to 3500 PSI
Permatex
This formulation was specially designed for a faster, long-lasting bond. It is
easily applied and works on non-porous materials including metal, plastics,
rubber, vinyl, paper, wood, textiles, and cork gaskets. Permanent transparent
bond fills gaps to .004".
®
Super Glue
MARS
NO.
95555 5 Min Epoxy, .84 fl oz 12 12
95556 30 Min Epoxy, .84 fl oz dual syringe 12 12
95557 Super Glue Gel tube, 2 grams 12 12
95558 Super Glue tube, 2 grams 12 12
DESCRIPTION
MARS
PACK
CASE
QTY.
SI–134
The largest selection of motors, components and accessories for the HVAC/R Industry
95555
95557
95556
95558
Loading...