MARS SERIES 654 Catalog Page
Access Fittings & Service Valves
Braze-On Service Valves - Saddle Valves
Braze-on self-piercing copper service valves are widely used and easily
installed on a charged line. After brazing the saddle portion onto the line,
the steel pin with valve core penetrates the line and is locked into place
simply by tightening the cap. Available in sizes from 1/4” to 1-1⁄8”.
MARS
NO.
65425 1/4” qty 6 per bag 1
65426 5/16” qty 6 per bag 1
65427 3/8” qty 6 per bag 1
65428 1/2” qty 4 per bag 1
65429 5/8” qty 3 per bag 1
65430 3/4”qty 2 per bag 1
65431 7/8” qty 2 per bag 1
65432 11/8” qty 2 per bag 1
DESCRIPTION
Economy Line Service Valves Extended Copper Tubes
• With valve core & flat cap (#65408)
• 1/4” male flare access fitting
MARS
NO.
65438 3/16” copper tube extension, qty. 6 / bag 1
65439 1/4” copper tube extension, qty. 6 / bag 1
65440 5/16” copper tube extension, qty. 6 / bag 1
65441 3/8” copper tube extension, qty. 6 / bag 1
65442 1/8” copper tube extension, qty. 6 / bag 1
65434 5/16” copper tube extension, bulk 100
65435 3/8” copper tube extension, bulk 100
65436 3/16” copper tube extension, bulk 100
65437 1/4” copper tube extension, bulk 100
65443 1/8” copper tube extension, bulk 100
DESCRIPTION
MARS
PACK
MARS
PACK
MARS SERIES 654
65425-32
SERVICE & INSTALLATION
65438-43
65452-54
65459
Copper Tees - 1/4” Male Flare
Copper tees have bodies brazed on. Using copper for the tee portion
allows tubing to be attached to each end and allows using a solderless than
silver solder, such as 95-5. They are to be used where two line ends have not
yet been attached or where it is desireable to cut a line rather than drive a hole
on an uncharged system. Copper tees save time and money. • includes valve
core and flat cap (#65408).
MARS
NO.
65447 Tee for 1/4” O.D. tube (2 bag) 1
65448 Tee for 5/16” O.D. tube (2 bag) 1
65449 Tee for 3/8” O.D. tube (2 bag) 1
65450 Tee for 1/2” O.D. tube (2 bag) 1
65451 Tee for 5/8” O.D. tube (2 bag) 1
65452 Tee for 3/4” O.D. tube (2 bag) 1
65453 Tee for 7/8” O.D. tube (2 bag) 1
65454 Tee for 11⁄8” O.D. tube (2 bag) 1
DESCRIPTION
MARS
PACK
65461
65447-451
Tees Connectors
Tee connectors are used to connect controls to check oil pressure on larger compressors having positive pressure oil pumps and to check
the accuracy of oil pressure gauges installed on the equipment by the manufacturer against your gauge with known accuracy.
MARS
NO.
65459 1/4” m. flare x 1/4” f. flare nut w/ depressor tip x 1/4” m.
flare on the branch w/one valve core (qty. 2 per bag)
65460 1/4” m. flare with valve core x 1/4” m. flare x 1/4” f. flare
nut w/ depressor tip on the branch (qty. 2 per bag)
DESCRIPTION
MARS
PACK
1
1
MARS
NO.
65461 All brass tee connector 1/4” m. flare with valve core &
cap x 1/4” m. flare x 1/4” f. flare nut with depressor tip
DESCRIPTION
on branch (qty. 1 per bag)
MARS
PACK
1
The largest selection of motors, components and accessories for the HVAC/R Industry
SI–55
Loading...