MARS SERIES 562 Catalog Page
Condenser Fan Motors, Three Phase
MARS SERIES
562
Commercial Condenser Fan/Heat Pump, Three Phase
Applications:
Open
Features:
Enclosed
Noted
Open Air Over, Rigid Base, Shaft Up or Horizontal
HP RPM VOLTS FRAME MARS MODEL MULT. F.L. “C” SHAFT FOOT
1/3
1140 208-230/460 56Z X532 56T11O11001
1/2
1140 208-230/460 56Z X533 56T11O11002
850 208-230/460 56HZ X529 56T8O5531
3/4
1140 208-230/460 56HZ X512 56T11O15511 F1 2.7-3.0/1.5 14.18 5/8 x 5 VC,5
1
1140 208-230/460 56HZ K1485 5K49RN6118S
1140 208-230/460 56HZ X513 56T11O5305
850 208-230/460 56HZ X528 56T8O5306
1 1/2
1140 208-230/460 56HZ K1486 5K48TN6119S
1140 208-230/460 56HZ X523 56T11O5306
850 208-230/460 56HZ X531 56T8O15504
2
1140 208-230/460 56HZ X525 56T11O5310
Commercial condenser fans may be installed outdoors. These motors need to be
mounted within the airflow of the fan for proper cooling. Used on Trane, Carrier,
Climtrol and York units, 5 tons and larger.
• 70°C ambient (except as noted)
• Enclosed shaft end bracket, vented
frame
• Continuous duty, air over
• Automatic reset thermal protector
• Shaft slinger
• Threaded lead exit
As
NO. NO. SYMB. AMPS DIM. DIM. NOTES
STOCK
✯
✯
✯
✯
✯
✯
✯
✯
✯
✯
F1 1.8-1.8/0.9 13.37 1/2 x 5 45,50
F1 2.1-2.0/1.0 13.37 5/8 x 5 45,50
F1 2.9-3.0/1.5 14.68 5/8 x 5 VC,5
F1 4.2-4.0/2.0 16.02 5/8 X 6 d,46
F1 4.1-4.2/2.1 14.68 5/8 x 5 VC,5
F1 5.1-5.3/2.65 17.06 5/8 x 5 VC,5
F1 5.1-5.0/2.5 16.77 5/8 X 6 d,46
F1 5.45-5.4/2.7 15.68 5/8 x 5 VC,5
F1 7.0-7.0/3.5 16.68 5/8 x 5 VC,5
F1 7.2-6.8/3.4 16.68 5/8 x 5 VC,5
• Nameplated 60/50 hertz 190/380
volts, at next lower HP
• Double sealed ball bearings
• Flat and keyway on shaft
• Patented VCD™- Voltage Change
Device (as noted)
• Ball Bearings
• UL Recognized and CSA Certified
MARATHON
ME–58
Stock model for Marathon and/or MARS.
✯
The largest selection of motors, components and accessories for the HVAC/R Industry
®
Loading...