MARS SERIES 400 Catalog Page

Air Moving Components

MARS SERIES 400

KC & KH Blades

airMARS KC series blades are designed for use in air
circulators, cooling towers, air cooled condensing units,
and small cooling towers. Performance figures are based
on applicable standards such as ASHRAE 51/AMCA

210. Suitability for an application is the responsibility of
the customer.

See page AM-11 for KC blades with fixed 5/8” hubs.
Taper lock bushings for KC and KH blades are also listed
on page AM-11.

Features:

4 wing blades

•

• High quality steel

• Viewing from air discharge side - CW rotation

MARS MODEL NO.OF BLADE PITCH BLADE Static Pressure .10” Static Pressure .30” MAX

NO. NO. BLADES DIA. DEG. DEPTH RPM CFM BHP CFM BHP RPM

40200 5-3363

40201 5-3362

40202 5-3298

40203 5-2225

40204 5-3660

40205 5-3300

40206 5-3299

40207 5-2189

40208 5-3301

40209 5-3302

40211 5-2190

850 4306 0.25 2849 0.28

4 24 28 2.75 1000 5223 0.40 4272 0.45 1450

1140 6057 0.59 5274 0.64

850 5188 0.36 3481 0.38

4 24 34 3.25 1000 6286 0.58 3159 0.61 1450

1140 7288 0.84 6406 0.90

850 5621 0.38 4352 0.42

4 26 28 2.63 1000 6794 0.60 5812 0.65 1140

1140 7867 0.88 7025 0.94

850 7629 0.52 5906 0.57

4 26 38 3.25 1000 9220 0.81 7888 0.88 1140

1140 10676 1.19 9534 1.27

850 9516 0.75 7367 0.81

4 28 38 3.25 1000 11195 1.22 8667 1.35 1140

1140 12763 1.80 9881 1.92

850 6691 0.40 5176 0.43

4 30 22 2.19 1000 8070 0.63 7051 0.69 1140

1140 9337 0.92 8446 1.00

850 8985 0.73 7209 0.79

4 30 30 2.88 1000 10809 1.16 9471 1.25 1140

1140 12482 1.70 11354 1.81

850 10655 1.00 8684 1.01

4 30 38 3.63 1000 12812 1.62 11301 1.65 1140

1140 14791 2.40 13498 2.43

4 36 32 3.63

4 36 34 3.81

4 36 38 5.18

720 13226 1.26 11247 1.33
850 15892 2.04 14340 2.14

720 13749 1.40 11764 1.46
850 16511 2.29 14936 2.38

720 14608 1.56 13148 1.63
850 17542 2.56 16694 2.66

850

850

850

airMARS

continued on next page

The largest selection of motors, components and accessories for the HVAC/R Industry

AM–11