MARS SERIES 100 Catalog Page
®
®
Condenser Fan Motors – Single Phase – PSC
51⁄2 inch dia. MARS SERIES 100
Outdoor Condenser Fan Motors
Ball Bearing
ARS up/down outdoor condenser fan motors are designed for either
M
60˚C
vertical shaft-up or shaft-down applications. Shell and end shields are
enclosed for weather protection. A weep hole is provided in each end
shield to allow condensate to drain. All of these motors are suitable for air
conditioning or heat pump applications.
Features:
• All angle
• Rheem mounting holes w/screws installed
• Water slinger on shaft
• Thru-bolt or band mounting
• Capacitor requirement noted on motor label
• Extra set of nuts & star washers
on mounting studs
• Double full flatted shaft
Specifications:
• Class “B” insulation
• Single phase, 60 hertz
• Thermal overload protected
• Totally enclosed non-ventilated
• 36 inch leads
Cross Reference
MARS No. GE/Genteq Fasco Marathon Century/AO Smith
10203 3203 D793 X465 FE1018SF, FSE1018SF CF-816
10204 3204 X450 FE1028SF, FSE1028SF 1874 40825 S1-FHM3204 CF-814
10205 3205 X451 FE1038SF, FSE1038SF 1875 30825 S1-FHM3205 -
10732 3726 X427 2246 CF-3726
10733 3732 D7909 X428 F1026S, FE1026SF, FSE1026SV1 1876 51876 CF-3732
10734 3733 D7908 X413 F1036S, FE1036S 1877 51877 CF-3733
10735 3734 D7907 X414 F1056S, FE1056SF 1878 51878 CF-3734
10736 3735 X469 F1076SF, FS1076S 1879 51879 CF-3735
10747 3736 X452 F1058
US Motors/
Emerson
Packard
York
Source 1
Reversible Rotation
MARS NO. HP VOLTS AMPS RPM
CAP
REQUIRED
DIMENSIONS
A B C
1075 RPM
10732 1/6 208-230 0.90 1075 5/370 6.50 4.13 1/2
10733 1/4 208-230 1.8 1075 5/370 6.50 4.25 1/2
10734 1/3 208-230 2.4 1075 7.5/370 6.50 5.10 1/2
10735 1/2 208-230 3.5 1075 10/370 6.50 5.70 1/2
10736 3/4 208-230 5.2 1075 10/370 6.50 5.11 1/2
825 RPM
10203 1/6 208-230 1.0 825 5/370 5.50 4.10 1/2
10204 1/4 208-230 2.2 825 5/370 5.50 4.40 1/2
10205 1/3 208-230 1.9 825 7.5/370 5.50 5.10 1/2
10747 1/2 208-230 2.8 825 12.5/370 6.50 5.70 1/2
ROTOM
6
Toll Free (800) 445-4155 • Fax (631) 348-7160 • www.marsdelivers.com
Loading...