Mars RG09D/BGEU, R09F/BGCE, RG09D/BGCEU, R09F/BGE, RG09E/BGCEU1 Remote Control Manual
...
Remote Control Manual
Portable Room Air Conditioner
Remote Control for:
PS-81B
PS-101B
517.787.2100 • www.marsdelivers.com • www.heatcontroller.com
Remote Control Manual - PS-81B / PS-101B
Remote Control Manual - PS-81B / PS-101B
CONTENTS
Features of remote control............................................................
Indicators on remote controller......................................................
Handling the remote controller.....................................................
Setting the clock...........................................................................
Automatic operation......................................................................
Cooling/Heating/Fan only operation..............................................
Drying operation ..........................................................................
Timer operation............................................................................
Example of timer setting...............................................................
Cautions.......................................................................................
1
3
4
5
6
7
7
8
9
11
Specification
Model
Rated Voltage
Lowest Voltage of
CPU Emitting Signal
Transmission Distance
Environment
R09D/BG(C)E,
R09E/BG(C)E, RG09E/BG(C)EU1,
R09F/BG(C)E, RG09D/BG(C)EU
3.0V(Dry batteries R03/LR03×2)
2.0V
8m
。 。
-5 C 60 C(-41 F~140 F)
~
O O
Features of remote control
ON
O
FF
ON
O
FF
On
Stop
2 hours later
after setting
Set
Start
10 hours later
after setting
Off
Stop
Start
5 hours later
after setting
8 hours later
after setting
Set
AUTO
C
L
O
C
K
SE
T
T
E
O
N
O
F
F
F
A
N
S
P
E
E
D
Remote Control Manual - PS-81B / PS-101B
M
P
.
C
F
1
2
MODE
SWING
3
FAN
7
TIMER
8
CANCEL
9
4
5
RES ET
SLEEP
6
1
ON/OFF Button: Push this button to start operation, push
LOC K
LED
CLOCK
10
11
12
the button again to stop operation.
2
MODE Select Button: Each time you push the button, a mode
is selected in a sequence that goes from AUTO、COOL、
DRY、HEAT and FAN, as the following figure indicates:
AUTO
COOL
DRY
HEAT
FAN
!
NOTE:
Do not select HEAT mode if the machine you
purchased is cooling only type. Heat mode is not supported
by the cooling only appliance.
3
SWING Button(on some models): Push this button, the louver
will swing up and down automatically. Push it again to stop.
4
TEMP/TIME Button : Push the button to increase the
indoor temperature setting or to adjust the TIMER in a clockwise
direction. Push the button to decrease the indoor
1
Remote Control Manual - PS-81B / PS-101B
button
Features of remote control(continued)
temperature setting or to adjust the TIMER in a counter-clockwise
direction.
NOTE: Press and hold and buttons together for 3 seconds
will alternate the temperature display between the C & F scale.
5
SLEEP Button: In SLEEP mode,
Active/Disable sleep function. This will maintain the most
comfortable temperature and save energy. This function is
available on COOL, HEAT or AUTO mode only. For detail,
,,,,
see Sleep operation in USER S MANUAL.
,,
,
,,
NOTE:
While the unit is running under SLEEP mode, it would
be cancelled if MODE, FAN SPEED or ON/OFF button is
pressed.
6
RESET Button: When you press the recessed RESET button,
all current settings are cancelled and the control will return to
the initial settings.
FAN Button: Used to select the Fan Speed in four steps-
7
AUTO、LOW 、MED(some models without) or HIGH. Each
time the button is pressed, the fan speed mode is shifted.
8
TIMER Button: This button is used to preset the time ON
(start to operate) and the time OFF (turn off the operation).
CANCEL Button:
9
(a). If the TIMER ON, TIMER ON OFF or TIMER OFF ON
feature has been set, pressing the CANCEL button will override
the TIMER program and turn off the unit as well.
(b). If only setting TIMER OFF feature, pressing the CANCEL
will cancel the timer off setting and turn on the unit (when
the unit is off).
(c). If no TIMER feature has been set, press the CANCEL button,
and nothing will happen.
10
CLOCK Button: Use to set the time.
11
LED Button: Press this button to clear the digit display in the
air conditioner, press it again to activate it .
12
LOCK Button: When you press the LOCK button, all current
settings are locked in and the remote controller does not accept
any operation except that of the LOCK. Press again to cancel
the LOCK mode.
2
Loading...