
Accessories
ARS SERIES
M
MOUNTING KITS
KIT200
Holes for 4.4" and 5.6"
diameter motors.
One kit will adapt both ends of
motor for base mounting.
KIT199
Motor length adapter kit.
Provides means to base mount
Fasco 5"" diameter motors.
Two kits needed to adapt both
ends of motor for base mounting.
081
IT380
K
Rheem mounting adapter plate.
Packaged one per kit.
KIT214
Special end plate for 3.3" diameter.
Packaged one per kit.
KIT218
Aluminum stand-off bracket for
motor-blower mounting.
Matches 3.3" mounting pattern.
Kit 214 required to mount to motor.
Packaged one per kit.
ADAPTER PLATES
FASCO
2-1/2"
KIT207
Provides rectangular mounting stud pattern on 5.0" or 5.6" diameter
Fasco motors to match Fedders stud motors.
Similar to Emerson and RMR rectangular mounting stud patterns.
Packaged one per kit.
4-5/16"
KIT205
Franklin Redmond 4 1/8" diameter
mounting adapter plate.
Packaged one per kit.
F-66
The largest selection of motors, components and accessories for the HVAC/R Industry