Mars GSW1 User Manual

GSW1
Simple Universal GSM controller
USER MANUAL
GSW1
USER MANUAL
Page 1
Contents
1 FOR YOUR SAFETY ............................................................................................................................................. 3
2 INTRODUCTION ................................................................................................................................................... 4
3 GSW1 FEATURES AND APPLICATIONS......................................................................................................... 5
4 START UP ............................................................................................................................................................... 6
5 LED INDICATION ................................................................................................................................................. 7
6 CONNECTION DIAGRAM .................................................................................................................................. 8
7 GSW1 UNIT MANAGEMENT ............................................................................................................................. 9
8 GSW1 FUNCTIONS WITH PROGRAMMING INSTRUCTIONS ................................................................ 10
8.1 WEB SERVER - LOG IN .................................................................................................................................................. 10
8.2 WEB SERVER – ADDING UNITS TO USER PROFILE ................................................................................................ 11
8.3 WEB SERVER-UNIT MANAGEMENT .......................................................................................................................... 13
8.4 CALLER ID ACCESS ....................................................................................................................................................... 14
8.5 OUTPUTS SETTINGS ...................................................................................................................................................... 15
8.6 ADMINISTRATION ......................................................................................................................................................... 17
8.7 MISCELLANEOUS .......................................................................................................................................................... 19
9 CONTACTS .......................................................................................................................................................... 20
GSW1
USER MANUAL
Page 2
Figures
Figure 1: GSW1: Connection diagram ................................................................................................. 8
Figure 2: WEB Server-Sign In page .................................................................................................. 10
Figure 3: WEB Server-Main page select ADD mode ........................................................................ 11
Figure 4: WEB Server-Main page adding GSW1 units ..................................................................... 12
Figure 5: WEB Server-Unit management window ............................................................................ 13
Figure 6: WEB Server-Caller ID Access ........................................................................................... 14
Figure 7: WEB Server-Output setting ................................................................................................ 15
Figure 8: WEB Server-Notification numbers .................................................................................... 17
Figure 9: WEB Server-Input alarm configuration ............................................................................. 17
Figure 10: WEB Server-Misc ............................................................................................................ 19
GSW1
USER MANUAL
Page 3
1 FOR YOUR SAFETY
SWITCH ON SAFELY
Do not switch the unit on when use of wireless phone is prohibited or when it may cause interference or danger.
INTERFERENCE
All wireless phones and units may be susceptible to interference, which could affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the unit off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the unit at a refueling point. Do not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the unit where blasting is in progress.
USE SENSIBLY
Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.
GSW1
USER MANUAL
Page 4
2 INTRODUCTION
GSW1 is a simple GSM switch system designed to ensure low-cost, simple to install/use, reliable and single box solution for remote managed switching application. It is designed for unlimited range caller ID control.
Optional GSW1 supports alarm detection, stay-alive messages, credit detection etc…
GSW1
USER MANUAL
Page 5
3 GSW1 FEATURES AND APPLICATIONS
Features:
Built-in 4 (2G) or 5 (3G) band GSM module Caller ID numbers control (up-to 100 caller ID numbers) 1 output (relay supported)
Programming with PC via “USB to Mini USB cable” connected to the unit Programming by WEB server Programming by SMS commands
Applications:
Remote gate opener – Caller ID number recognition
GSW1
USER MANUAL
Page 6
4 START UP
GSW1 unit accepts a standard GSM SIM cards from any network.
VERY
IMPORTANT
USE A MICRO SIM CARD
WARNING
DO NOT Insert or remove the SIM card while the unit is powered ON!!
IMPORTANT
Before inserting SIM card to unit make sure the PIN code is removed!!
Insert SIM card in GSW1 unit. Connect power cable to GSW1 unit (YOU MUST POWER THE GSW1 UNIT WITH THE
POWER SUPPLY IF INCLUDED. Do not power with any other power supply).
Power up the unit. Wait until LED1 (Green) starts flashing. This is set in around 30 – 45 seconds. GSW1 unit is now ready to operate.
GSW1
USER MANUAL
Page 7
5 LED INDICATION
Green LED (LED1)
- Indicates the level of the GSM signal from 1 to 5 LED flashes (1 is weak signal, 5 is
excellent signal)
Yellow LED (LED3)
- Short flashing indicates that the GSM module is ON, but it is not yet connected on the GSM
network. After connection, yellow led is flashing with short pulse (0,5s) ON and a long pulse OFF (5s).
GSW1
USER MANUAL
Page 8
6 CONNECTION DIAGRAM
Before connection the GSW1 please take a look at connection diagram.
Figure 1: GSW1: Connection diagram
IMPORTANT
DO NOT USE Power out (12V AUX) for electric lock driving! Use separate power source for door electric lock!
GSW1
USER MANUAL
Page 9
7 GSW1 UNIT MANAGEMENT
Unit supports different types of management (programming):
Unit can be programmed directly by USB connection, with the use of configuration software
running on PC (EasySet).
Unit can be programmed remotely by using WEB server access. Unit can be programmed remotely by SMS commands (Optional).
GSW1
USER MANUAL
Page 10
8 GSW1 FUNCTIONS WITH PROGRAMMING
INSTRUCTIONS
As mentioned in previous chapters GSW1 unit can be programmed in various ways, this document will focus on most common programming way: WEB programming.
IMPORTANT
SIM card in the GSW1 unit MUST have DATA PLAN to be able to use WEB programming!
8.1 WEB SERVER - LOG IN
The web server can be find under the address: http://www.easyset.eu/.
Figure 2: WEB Server-Sign In page
User must first use the Sign IN section to create working profile on the server. The profile can be created by using social login like Facebook, Google account or Twitter. The user lacks any of the social profile it can proceed to Sign UP page use standard user name and password entry.
NOTE
Server support Firefox, Google Chrome, Safari.
GSW1
USER MANUAL
Page 11
8.2 WEB SERVER – ADDING UNITS TO USER PROFILE
After login the user will be diverted to WEB server main window. This page is used to add/remove/search for GSW1 units from the user’s profile. Select “+” sign to select ADD GSW1 units to users profile.
Figure 3: WEB Server-Main page select ADD mode
GSW1
USER MANUAL
Page 12
Figure 4: WEB Server-Main page adding GSW1 units
User than provides required data:
Name: Name for the added unit - mandatory information. IMEI: Identification number of the unit, can be found in the enclosure of the unit -
mandatory information. The IMEI is located on the cellular chip and also should be on the card board box of the GSW1.
Phone Number: The telephone number of the SIM card in the GSW1 unit - mandatory data. GPRS settings: Information needed to enable data connection between the server and the
unit. Selectable from the drop-down menu - mandatory data.
Location: Notification field, used by the user to provide extra data for its own information -
optional data.
By clicking the “+” (insert sign) after filling mandatory data, the unit will be added to the user profile.
First building of the unit data-base may take a few minutes.
GSW1
USER MANUAL
Page 13
8.3 WEB SERVER-UNIT MANAGEMENT
After the GSW1 unit is added to user database, the user can change the configuration of the specific unit. All changes made by the user are listed in the Change Log window. By clicking Send to device button ALL changes are send to the unit. User can revert all changes made, before sending, by clicking Revert all or select particular entry and revert it.
Figure 5: WEB Server-Unit management window
GSW1
USER MANUAL
Page 14
8.4 CALLER ID ACCESS
Caller ID access is a very simple way to control relay output defined in Caller ID output setting. User will by calling in the GSW1 unit trigger defined output. Settings for this function are found in the Caller id # tab.
Figure 6: WEB Server-Caller ID Access
General settings:
Caller ID security mode: Selecting Caller ID Disabled deactivates caller ID function all
numbers are restricted. Selecting Caller ID for specific users will limit the caller ID function only to the numbers on the list. Selecting Caller ID always ON will allow all users that know the number of the unit to open defined output. In last option the user doesn’t need to be on the list to trigger the output
Caller ID output: Selecting the output that will be triggered in Caller ID function.
NOTE
Selection Caller ID always ON will allow anybody with the knowledge of the unit number to trigger the output by calling the unit. Use this setting with caution.
GSW1
USER MANUAL
Page 15
8.5 OUTPUTS SETTINGS
The behavior on the outputs is defined in the Output tab.
Figure 7: WEB Server-Output setting
Output 1 - Settings for output 1:
Output (relay) mode: User can select between 3 options
Disable-Output is disabled. Latching-Output is in latching mode. First Caller ID event will activate the output, second
Caller ID event will deactivate the output. Time Pulse-Output is time pulse mode. After output is triggered it will be activated for the time defined in Output pulse duration, after that time output will be restored.
Output pulse duration: ON time for output in case of output mode Timer pulse. Output is: Output can work in normal or inverted (normally close) mode.
Normally open-In idle mode output pins are in open position. Normally closed-In idle mode output connections are closed.
GSW1
USER MANUAL
Page 16
Additional output settings - Setting are used to link onboard actions with the outputs if needed:
Unauthorized call or SMS received: If unauthorized call or SMS is received on the unit
this event will activate output defined under this section.
Input 1 activate output: If input 1 is actived this action will activate output defined under
this section.
NOTE
Do to limitation of the outputs use additional outputs settings with care.
GSW1
USER MANUAL
Page 17
8.6 ADMINISTRATION
Administration tab allows user to enable advanced settings: notification of unauthorized access, periodic test messages, lock down of the unit…
Figure 8: WEB Server-Notification numbers
Phone number, User name: Phone number and user name of the user that will be receiving
notification messages.
Input1: If on input line 1 alarm condition is meet, users with check boxes will receive alarm
notification SMS.
INPUT 1-2
GND
INPUT 1-2
N.O.
Contact
N.O.
Contact
Figure 9: WEB Server-Input alarm configuration
Periodic test: User can receive periodic (keep-alive) SMS, tick the check box for the
appropriate user. Timer period is defined under parameter Automatic periodic test SMS, it is definable in hours.
Low credit alert: In case of prepaid SIM card the unit can notify the user if the credit on the
SIM card is low. To enable notification SMS tick the check box in corresponding position. Note that additional input in the Misc tab is needed to fully enable credit checking function.
GSW1
USER MANUAL
Page 18
Unauthorized call: In case of unauthorized call the unit can notify user. To enable
notification SMS tick the check box in corresponding position.
Administration allowed to remote program by SMS: By selection this option the user can
“Lock down” the GSW1 unit, preventing any unauthorized user to change any configuration on the unit.
Automatic call to administrator 1: To prevent SIM card provider to lock out the SIM card
from the network, user can define a periodic call out to telephone number under position 1. Parameter is defined in days (It is not mandatory to set this parameter).
GSW1
USER MANUAL
Page 19
8.7 MISCELLANEOUS
This tab is split into 2 sections.
Figure 10: WEB Server-Misc
General settings can be found:
SMS text Language: define the language of the SMS information send out. User can select
appropriate language in drop-down menu.
Automatic GSM module restart interval: User can select GSM module restart interval
(hours) if needed (Not advisable to use this parameter if not advised otherwise).
Self-updating clock: Parameter is used to allow unit to synchronize to real time. To have
the correct time along in log event it is advisable to enable this function.
Prepaid SIM card setting is used the enable credit checking/parsing in case if prepaid SIM card is used. User can select the proper setting by selecting used SIM card provider in the drop down menu in Provider preset.
GSW1
USER MANUAL
Page 20
9 CONTACTS
MARS COMMERCE d.o.o.
MIRKA VADNOVA 19 4000 KRANJ SLOVENIA
TEL: 00 386 4 280 74 00 E-MAIL: info@mars-commerce.com WEB SITE: www.mars-commerce.com
TEHNICAL SUPPORT
Tomaz HRIBAR Email: tomaz@mars-commerce.com
SALES
Uros STARE Email: sales@mars-commerce.com
Loading...