Mars D2826 User Manual

Multi-HP Motors

5.6 inch dia. M

FIG. A

D2826, D837, D2827

ARS SERIES

075 & 076

FIG. B

D2835, D833

IG. C

D2832, D2833

PSC, Reversible, 4 Drillled & Tapped Holes In Shell

FASCO

MODEL# CONN. 208V 230V DIM.

D2826

D837

D2827

HP VOLTS COOLING HEATING

1/3 High 10 MFD 825 1.9 Totally Enclosed BALL 1/2 X 5 5.25 A 1/4 High 10 MFD 825 1.5 Totally Enclosed BALL 1/2 X 5 5.25 A

208-230

1/5 1/6 Low 7.5 MFD 825 1 Totally Enclosed BALL 1/2 X 5 5.25 A

1/3 High 7.5 MFD 1075 2.6 Totally Enclosed SLV 1/2 X 6-1/2 4.5 A 1/4 High 7.5 MFD 1075 2.5 Totally Enclosed SLV 1/2 X 6-1/2 4.5 A

208-230

1/5 1/6 Low 5 MFD 1075 1.8 Totally Enclosed SLV 1/2 X 6-1/2 4.5 A

1/3 High 12.5 MFD 1075 3 Totally Enclosed BALL 1/2 X 5 5.25 A 1/4 High 12.5 MFD 1075 2.2 Totally Enclosed BALL 1/2 X 5 5.25 A

208-230

1/5 1/6 Low 10 MFD 1075 1.3 Totally Enclosed BALL 1/2 X 5 5.25 A

SPEED

CAP.

SERIES

Low 7.5 MFD 825 1.2 Totally Enclosed BALL 1/2 X 5 5.25 A

Low 5 MFD 1075 2 Totally Enclosed SLV 1/2 X 6-1/2 4.5 A

Low 10 MFD 1075 1.6 Totally Enclosed BALL 1/2 X 5 5.25 A

CAP. @ CAP. @

CONDENSER FAN MOTORS

075

RPM AMPS ENCLOSURE BRNG. SHAFT DIM.

“A”

FIG.

SERIES

1/2 High Med-Low 10 MFD 1075 7.3 Open Ventilated SLV 1/2 X 3-3/4 4.75 B 1/3 High Med-Low 5 MFD 1075 6.9 Open Ventilated SLV 1/2 X 3-3/4 4.75 B

D2835 1/4 115 Med-Hi Low 5 MFD 1075 5.5 Open Ventilated SLV 1/2 X 3-3/4 4.75 B

1/5 Med-Low Low 5 MFD 1075 3.6 Open Ventilated SLV 1/2 X 3-3/4 4.75 B 1/6 Low Low 5 MFD 1075 2.8 Open Ventilated SLV 1/2 X 3-3/4 4.75 B

FASCO

D833 1/4 208-230 Med-Hi Low 5 MFD 1075 2.8 Open Ventilation BALL 5/8 X 4-1/2 4.75 B

D2832

D2833

All Fasco PSC motors use a 5 mfd at 370 VAC run capacitor, MARS # 12005 or equivalent, unless otherwise noted.

F-38

1/2 High Med-Low 10 MFD 1075 3.6 Open Ventilation BALL 5/8 X 4-1/2 4.75 B 1/3 High Med-Low 5 MFD 1075 3.5 Open Ventilation BALL 5/8 X 4-1/2 4.75 B

1/5 Med-Low Low 5 MFD 1075 1.9 Open Ventilation BALL 5/8 X 4-1/2 4.75 B 1/6 Low Low 5 MFD 1075 1.3 Open Ventilation BALL 5/8 X 4-1/2 4.75 B

3/4 High Med-Low 20 MFD 1075 8.1 Open Ventilated BALL 1/2 X 5 5.75 C 1/2 High Low 10 MFD 1075 6.6 Open Ventilated BALL 1/2 X 5 5.75 C 1/3 115 Med-Hi Low 10 MFD 1075 4.6 Open Ventilated BALL 1/2 X 5 5.75 C 1/4 Med-Low Low 10 MFD 1075 3.8 Open Ventilated BALL 1/2 X 5 5.75 C 1/5 Low Low 10 MFD 1075 3.1 Open Ventilated BALL 1/2 X 5 5.75 C

3/4 High Med-Low 20 MFD 1075 3.8 Open Ventilated SLV 1/2 X 5-1/2 5.75 C 1/2 High Low 10 MFD 1075 3.7 Open Ventilated SLV 1/2 X 5-1/2 5.75 C 1/3 208-230 Med-Hi Low 10 MFD 1075 2.5 Open Ventilated SLV 1/2 X 5-1/2 5.75 C 1/4 Med-Low Low 10 MFD 1075 1.8 Open Ventilated SLV 1/2 X 5-1/2 5.75 C 1/5 Low Low 10 MFD 1075 1.7 Open Ventilated SLV 1/2 X 5-1/2 5.75 C

The largest selection of motors, components and accessories for the HVAC/R Industry

DIRECT DRIVE FAN & BLOWER MOTORS

076