Mars 95441 User Manual
Plumbing & Piping Products
®
MARS SERIES 954
Heat-Seal Stik
• Fast repairs completed in 90 seconds
One part epoxy, no mixing or measuring needed
•
• Stick melts, seals and cures in one operation
• Use on aluminum, copper and other metals, glass and ceramics
• Ideal for use on high and low side of refrigeration systems
• Sealing temperature : up to 350
• Pressures: to 600 PSI (41 Bar)
MARS
NO.
95430
®
°
F (177°C )
DESCRIPTION
3/8 oz. stick, carded 12 12
MARS
PACK
CASE
QTY.
Bloc-it®Heat Absorbing Paste
• Effectively absorbs surface heat
• Protects adjoining surfaces that may be damaged by excessive heat
• Safe to use: non-toxic, no asbestos, harmless to skin, and odorless
• Easy to use: apply directly to surface from tube
• Easy to clean: wipe off with cloth or wash with water. Leaves no stains
• Typical uses: protects rubber and plastic components in ball, dielectric, and
solenoid valves during soldering; protects painted or finished surfaces from
adjacent soldering, brazing or welding; prevents distortion to light gauge
metals during brazing or welding
MARS
NO.
95455
DESCRIPTION
10 oz. tube 24 24
MARS
PACK
CASE
QTY.
95430
SERVICE & INSTALLATION
Cool Gel - Heat Dissipating Spray
• Helps prevent heat damage to components and surrounding materials
during soldering, brazing, and welding
• Unique gelled formula sticks to surfaces without dripping or running off
• Clear, non-staining gel leaves no residue, eliminating cleanup
• Safe, non-toxic, harmless to skin and odorless
• Saves time - by eliminating the costly disassembly of valves and other
components before soldering, brazing or welding
• Protects the seals and seats in ball, dielectric, and solenoid valves
• Protects painted and finished surfaces from discoloration due to adjacent
torch operations
• Protects soldered joints from loosening when soldering adjacent joints
MARS
NO.
95536
DESCRIPTION
1 quart 12 12
MARS
PACK
CASE
QTY.
Regular Flux Paste
• Super detergent action cleans as it solders
• Non-acid, non-toxic, lead free
• Contains no zinc chloride
• Use with all common soft solders including: tin-silver, 96/4, 94/6, 95/5,
50/50, 40/60 and 60/40
• For use on copper, brass, galvanized iron, lead, zinc, tin, silver, nickel, mild
steel, terne plate, and malleable iron
• Meets Mil. Spec. Mil-F4995 Type II, Meets ASTM B813
• Water soluble for faster flushing from pipe lines
MARS
NO.
95441
95443
95444
DESCRIPTION
2 oz 48 48
4 oz. w/brushcap 48 48
1 lb 24 24
MARS
PACK
CASE
QTY.
95455
95536
95443
The largest selection of motors, components and accessories for the HVAC/R Industry
SI-83
Loading...