Mars 93801 User Manual

Chemicals

hawzone liquid dehydrant chemically “dries” all refrigerants (R12, R22, R134,

T etc.), methyl chloride, and methylene chloride. Thawzone frees frozen systems due to moisture in five minutes. It prevents refreezing, does not leave any residue, does not contain any dissolved solids or methanol, and works with or without solid dryers. Available in 1 oz., 4 oz. and 16 oz. plastic bottles.

Leak Lock joint sealer is a soft setting pipe joint compound for sealing threaded joints, flanged joints, gasket surfaces and mating surfaces. This resin based brushable paste remains permanently flexible, adheres to internal surfaces and fills voids. It is ideal for use on metal and plastic materials subject to extreme vibrations, temperatures from -100˚F (-73˚C) to 400˚F (204˚C) full vacuums to 10,000 PSI. Leak Lock seals all refrigerants (R12, R22, R502, R134A, etc.) petroleum products, natural and manufactured gases, steam, water, air, etc. Available in 11⁄3 oz. plastic tube and 4 oz. and 1 pint brushtop plastic jars.

Red Epoxy aluminum sealer is a high performance heat cured, two part epoxy kit for patching or sealing on all metals and some plastics. Red Epoxy is cured within minutes and equipment is serviceable immediately. It is excellent for sealing threaded or unthreaded pipes and is great as a field repair kit for aluminum evaporators, coils, radiators, pipes, tanks, etc. Temperature range: -100˚F (-73˚C) to 300˚F (149˚C). Tensil strength: 600psi. working pressure tested in excess of 3000 psi. Kit includes resin & hardener. (.5 oz. tube each)

Low-Temp Gas Leak Detector is non-toxic and non-hazardous and does not contain ethylene glycol. This non-freezing, viscous flourescent, bubble type gas leak detector is rated to -30˚F (-34˚C). The leaks appear as large strong bubbles which cling to the applied surface and are flourescent under a black light. For use on hot and cold piping and equipment containing most gases such as air, natural gas, all refrigerants (R12, R134A, R22, R502, etc.) ammonia, SO2etc.

The mid-temp gas leak detector is non-toxic and non-hazardous. It is a viscous, flourescent, bubble-type gas leak detector rated to 27˚F (-3˚C). Leaks appear as large strong bubbles which cling to the applied surface and are flourescent under a black light. For use on hot and cold piping equipment containing most gases suchas air, natural gas, all refrigerants (R12, R134A, R22, R502A, etc.), ammonia, SO2etc.

Solderlene is a high quality, paste type, non-acid soldering flux with industrial strength wetting agents to promote solder flow. For use with all low and mid temperature soft solders, both lead bearing and lead-free, on all metals except aluminum and magnesium.

Trace is a red dye trace type internal leak detector for use with mineral oil base refrigerant lubricants and hydraulic systems. Leaks show as intense red stains. Trace is non-volatile, will not sludge oil or deposit gum. Trace is soluble in the lubricant and liquid refrigerant but not the gas and travels with the lubricant. Oil seperators will remove trace and should be bypassed. Trace passes through solid core dryers but the color intensity may be reduced.

MARS

NO.

93801 93802 93815 93803 93804 93805 93806 93807 93808 93809 93810 93811 93812 93813 93814

DESCRIPTION

Thawzone 1 oz. bottle 24 Thawzone 4 oz. bottle 12

Thawzone 16 oz. bottle 6

Leak Lock 1 1 ⁄ 3 oz. tube 12

Leak Lock 4 oz. brush top jar 12

Leak Lock 1 pint brush top jar 12

Red Epoxy kit .5 oz. tube 24

Low Temp Gas Detector 8 oz. dauber bottle 24

Low Temp Gas Detector 32 oz. trigger spray 12

Mid-temp gas detector 8 oz. dauber bottle 24 Mid-temp gas detector 32 oz. trigger spray 12 Screwloose

Solderlene 4 oz. brushtop jar

Solderlene 1 pint brush top jar 12

Trace

4 oz. bottle

16 oz. bottle

The largest selection of motors, components and accessories for the HVAC/R Industry

MARS

PACK

93813

93806

93804

Chemicals

MARS SERIES 938

93801

SERVICE & INSTALLATION

93807 93808

93809 93810

93812

93814

SI-57