Mars 93516 User Manual

Self Adhesive Insulation Foam Tape

®

MARS Foam Tape - 1/8”X 2”X 30’ Roll

MARS Foam Tape is a self-adhering closed cell thermal insulation tape. This flexible

ape is ideal for wrapping hot or cold pipings and fittings. The energy saving and very

t
easy to use FoamTape is excellent forpreventingcondensation problems. MARS Foam
Tape is designed for retarding heat loss in hot pipings and preventing heat gain or frost
formation on cold, chilled water pipings or refrigerant lines. Adheres firmly to all metals.
Temperature range: -20

1. Good weather and UV resistant - reason being EPDM (Ethylene
Propylene Diene Monomer) is the main compound in the manufacturing
of Foamtape. In practice EPDM is also used in the manufacturing of
glass window strips of cars, which lasts for more than 10 years outdoors
without any replacement (inspite of being exposed to rain, heat & cold).

2. The specially coated acrylic adhesive provides extra adhering strength
compared to other tapes. Once installed, the special adhesive will act as
the bonding agent and wonʼt let the tape delaminate.

3. Low thermal conductivity (0.26 BTU. in/sq. ft. hr. deg. F at 75
prevent heat loss/heat gain and save energy.

4. An ozone friendly product manufactured under strict supervision of
trained personnels with quality check at every production point.

5. Low halogen contents. Tests have proved that MARS Foam Tape (or
FOAMTAPE excluding the adhesive) has chlorine and bromine content of

4.36% and 1.35% compared to NBR/PVC (Armstrong, Rubatex) based
brand insulation which has 12.45% and 6.14% respectively.

6. Our vulcanization system uses negligible amount of Sulphur (chemical
which corrodes copper tubings) and this special vulcanization process
decomposes chemicals almost completely.

Thickness To Prevent Pipe Condensation
Ambient Temperature Pipe Temperature

and Relative Humidity 50˚F (10˚C) 35˚F (2˚C)

80°F (27˚C) & 50% RH Single Layer 50% Overlap
85

°

F (30˚C) & 70% RH 50% Overlap 50% Overlap

MARS

NO.

93506

°

F to 200°F / -29°C to 93°C.

plus Single Layer Plus 50% Overlap

DESCRIPTION

Foam Tape 1 12

°

F) to

MARS

PACK

CASE

QTY.

MARS SERIES 932

SERVICE & INSTALLATION

Physical properties:

Composition:

Closed cell, elastomeric thermal
insulation.

Color:

Black

Density:

6±1 pounds per cubic feet.
(0.09-0.12 g/cm3)

(ASTM D-1667)

Thermal Conductivity:

0.26 BTU in./ft2 hr.°F at 75°F
(0.04 W/mK at 24°C)
(ASTM C-177)

Water Absorption:

Max 5% by weight
(ASTM D-1056)

Water Vapor Permeability:

0.15 Perm-inch (ASTM C-355)

Temperature Range:

-20°F (-29°C) to +200°F (+93°C)

Maintenance Products

Mortite Pipe Wraps

Mortiteʼs no-drip®tape stops cold water pipe sweating permanently. Wonʼt dry

out, crack or shrink. This self-adhering tape insulates hot water pipes up to 160°F.

®

No-drip
30ʼL roll covers 30 lineal feet of 1/2” O.D. pipe. Provides clean, neat appearance.

tape molds around valves, joints, tees and irregular fittings. The 2”W x

MARS

NO.

93516

DESCRIPTION

No-drip

®

tape - 2” x 30ʼ roll

The largest selection of motors, components and accessories for the HVAC/R Industry

CASE

QTY.

10

MARS SERIES 934

93516

SI-127