Component Accessories
Accessories for Relays and Capacitors
ARS SERIES
M
COMPONENT
930
QC-6 Kit
For conversion of
93001
screw-type
connections on
relays
QC-8 for 11001 Start Capacitor Kit
- 9 pc 93007 2 watt
(15,000 ohm)
resistors
- 32 pc push-on to
93003
screw-on
connectors
- 6 pc 93005 4-in
jumpers with .25-in
female spade
connectors
6 Inch Jumper
93006
- 6-in jumper with
.25-in female
spade connectors
Resistor for Start Capacitors
93007
- 2 watt (15,000
ohm) Resistors
QC-13 for Start Capacitors
- 10 pc 2 watt
93106
(15,000 ohm)
resistors with .25in female spade
connectors
Snap on Terminals
Sold in packs
of 25 only
93029
- 25 pc snap-on
terminals
- Converts push-on
type terminals to
screw-on type
Snap-on Mounting Brackets for Motor Start Capacitors
93026
93027
93028
2.75 in
3.38 in
4.38 in
Protector (boots) for Motor Run Capacitors
93011
3012
9
93013
1 Hole Boot
2 Hole Boot
3 Hole Boot for
Dual Section
Wrap-Around Brackets for Motor Run Capacitors
93014
93015
93116
Oval
1.94 x 2.78 for
base A
Oval
1.97 x 2.94 for
base C
Oval
2.25 x 3.66 for
base D
Mounting Brackets for Round Capacitors
93031
93032
93033
- For 1.63 in and
1.75 in diam
- For 2.0 in diam
- For 2.50 in diam
Bakelite End Caps for Motor Start Capacitors
93018
93019
93020
93021
- BEC-1 1.44 in
- BEC-2 1.81 in
- BEC-3 2.06 in
- BEC-4 2.56 in
Case Dimensions*
CASE SIZE DIAMETER LENGTH
1
2
4
5
6
7
8
The largest selection of motors, components, and accessories for the HVAC/R Industry
1.44 2.75
1.44 3.38
1.81 3.38
1.81 4.38
2.06 3.38
2.06 4.38
2.56 4.38
For mounting
OFF MOTOR.
Leads on top side.
93022
93023
93024
93025
*Capacitors may be put in different case sizes ocassionally,
but will not be larger than those stated.
-
BEC-1 1.44 in
-
BEC-2 1.81 in
-
BEC-3 2.06 in
BEC-4 2.56 in
C-9