Mars 86142 User Manual
Electrical Testers
®
®
MARS SERIES 861
LowVolt Stick & Volt Stick
The Volt Stick is an instrument for safely checking the presence of
an AC voltage in cables, wall outlets, fuses, circuit breakers, junction
boxes, power tools and appliances. Also, distinguishes between live
and neutral wire in single or three phase supplies. No current flow is
needed for correct operation of the Volt Stick. When a voltage is
detected, a red indicator in the plastic tip of the Volt Stick illuminates.
No contact is needed, unit operates at 1/8" distance from device.
Specifications
• Voltage range: 110 to 480 volts AC
• Not sensitive to stray electromagnetic static
• Response time: instantaneous
• Case breakdown: 4000 volts • operation temp: 0° to 120°F
• Batteries: two AAA, 1.5 volt alkalines included
The MARS LowVolt Stick operates from 24-110VAC and is
excellent for HVAC/R control voltage and thermostat applications.
MARS
NO.
86142
86144
DESCRIPTION
Volt Stick 1 12
LowVolt Stick 1 12
MARS
PACK
MARSVoltage and ContinuityTesters - Carded
The MARS audible/visual circuit tester, MARS #86138, is useful to
SERVICE & INSTALLATION
find the breakdown of the AC supply or to check proper connections
of electrical appliances.It is also used to test/check electrical products
with simple, fast and safe accuracy. This convenient tester is ideal for
repairing electronic components. It can check conditions of resistors,
capacitors, diodes, transistors, coils, transformer, etc.
Specifications:
• AC voltage test (ʻnon-contactʼ method, 70-10,000VAC)
(contact method, 70-250VAC)
it detects/identifies/fault finding AC voltage
in the wire, socket, plug, switch, pvc
conduit, wooden/dry wall
• DC voltage/polarity check (1.5-36VDC)
Identify the polarity of DC voltage, it lights up
at positive (+) only
• Uses #79469 replacement battery
MARS #86139, screwdriver/continuity tester with red LED
indicator is drop proof and water resistant. This shock proof tester
distinguishes the ʻhot/live and neutralʼ in the wire. This tester also
features a DC voltage/polarity check.
The low voltage tester with insulated leads is the fast, easy way to
trace and check low voltage AC or DC circuits from 5 to 50 volts. The
built-in indicator lamp lights up dim or bright depending on the voltage
tested. Comes with pocket clip.
86142
CASE
QTY.
86144
86140
86141
MARS
NO.
86140
86141
SI-96
DESCRIPTION
MARS
PACK
Low voltage tester 1
Neon test light, line voltage tester 1
The largest selection of motors, components and accessories for the HVAC/R Industry
Loading...