Mars 83308 User Manual
Rooftop Support Systems
QUALITY W EATHERPROOF
ELECTRICA L EQUIPMENT
®
MARS SERIES 939
Caddy®Pyramid ST Series Rooftop Support
®
addy
C
for roofing applications.
Features:
Thermoplastic base is UV stabilized and
•
weatherproof for long lasting
• Fixed-height mounting platform 4" off the
oof surface and 10" of usable strut length,
r
provides excellent load distribution
• Structurally engineered to support up to
1,000 lbs
MARS
93955
* Max. recommended load at 10.6 psi roof loading. Contact project or roofing engineer for maximum
allowable load on individual project roof system.
yramid ST Series Rooftop Support is roof-friendly, high-quality, versatile and durable
P
Hot-dipped galvanized finish
•
• Superior corrosion protection
• Supports the green building requirements, bases are made from recycled
material and can contribute toward
earning LEED credit
NO.
Mfg No. Height Length (1) Length (2) Width
Surface
RPS360400 4" 10" 12.5" 8" 94.3" 1,000 lbs.
Area
Rec. Load
A /C Disconnects
MARS SERIES 833
93955
MAX.
MARS AC Disconnect/GFCI Receptacle Combination
MARSAC Disconnect/ GFCI Receptacle Combination disconnects provide a convenient low cost
means to satisfy NEC Article 210.63 requirements for HVAC/R Equipment Outlets and Article
406.8(B)(1) for Receptacle – Wet Locations. The NEMA 3R design insures a safe, weather tight
installation for residential, light commercial and even some industrial applications.
SERVICE & INSTALLATION
Features & Benefits:
• 60 Amp, Non-Fused
• Pullout type
• 240 Volt AC, Single Phase
• 15 Amp,125V GFCI Duplex
Receptacle included
• UL & CUL Listed
• Meets NEC #210.63 & #406.8(B)(1)
MARS
NO.
83308
83335
Pullout disconnect/receptacle 4
Generic Brand Disconnect Box 6
• Compact size – 5"x7"x4"
• Removable cover
• Heavy galvanized ʻG90ʼ steel with highest quality electro-deposition
finish resists corrosion and fading
• NEMA 3R rated
DESCRIPTION
Midwest Three Phase Pullout Disconnects - 240V - NEMA 3R
Midwest three phase pull out disconnects and single phase non-automatic switches are
manufactured of heavy zinc coated steel with highest quality electro-deposition paint finish for
maximum corrosion resistance. The three phase disconnects are available with and without
fuse protection. Fusible units require three fuses. NEMA3R
MARS
NO.
83321
83322
83323
60 amp non-fused, three phase 4
DESCRIPTION
30 amp fused, three phase 4
60 amp fused, three phase 4
.
Non-Automatic Disconnects - Nema 3R
Midwest Electric has developed a new NEMA 3R, non-automatic A/C disconnect with a patent
pending on/off switch mechanism so there is no pullout to lose. This UL and CSA listed disconnect
features: a keyhole mounting slot for easy installation, a removable door for easy wiring access,
straight in and out lugs for quick connections and six 1/2” x 3/4” x 1” concentric knockouts.
The single phase non-automatic disconnects do not provide overcurrent protection with manual
internal on/off switch.
MARS
NO.
83328
DESCRIPTION
60 amp, 240V, 10 HP 4
83308
83335
MARS
PACK
83321
CASE
QTY
83328
CASE
QTY
SI-6
The largest selection of motors, components and accessories for the HVAC/R Industry
Loading...