Mars 80308 User Manual
A /C Disconnects
MARS SERIES 803
80308
Unique side opening door
permits greater visibility and
access to work area
Convenient electrical power
cord channel w/retaining clip
for easy and safe use of
portable tools
re-wired GFCI receptacle
P
Patented “Finger Safe”
Pullout section prevents
accidental contact with
electrodes
Easy to remove
concentric
knockouts &
secure locking
mechanism
Pullout Disconnect
w/GFCI Receptacle
The MARS2 Disconnect w/GFCI Receptacle provides a
convenient low cost means to satisfy NEC 2003 code
changes requiring that a GFCI receptacle with a "while in use"
cover be within a 25ft line of sight of the condenser unit. The
pre-wired receptacle with stripped wire ends makes
installation of Disconnect and Receptacle quick and easy.
This unit provides a significantly lower "installed cost" to the
contractor when compared to installing a standard disconnect
and separate GFCI receptacle with "while in use" cover to
comply with the new NEC code change.
Additional features and benefits include: Convenient electrical
power cord channel w/retaining clip for easy and safe use of
portable tools; Large wiring compartment for both disconnect
switch and receptacle; Angled Receptacle mounting to
eliminate the possibility of crushing portable electrical plugs
when closing "while in use” cover; Attractive side opening
cover design for ease of installation; Ultra UV powder coating.
Specifications:
• 60 Amp, Non-Fused
• Pullout Type
• Pre-wired 15A, 125V GFCI Receptacle Included
• 240 Volt, Single Phase
• 10,000 Amp Rated
• NEMA 3R & UL Rainproof
• UL & CUL Approved
• Rated for 10HP @ 240 Volts
• Meets NEC #210.63 & #406.8(B)(1)
• Multiple Patents Pending
MARS2
M2-4
MARS2
NO.
80308
DESCRIPTION
Pullout Disconnect
W/GFCI Receptacle
STD.
PACK
6 6
The largest selection of motors, components and accessories for the HVAC/R Industry
CASE
QTY.
Loading...