Mars 78301 User Manual
Brazing Alloys, Solders & Fluxes
MARS SERIES 793
Silver Bearing Soft Solders - 1/8” X 1 Lb. Spool
Clean-n-Brite solders are a high strength general purpose solder.
They offer a higher strength than Tin/Lead solders and are safe for
potable water systems. These alloys are widely used in low stress,
low pressure copper-copper and copper-steelapplications(e.g. sight
glasses where temperature must be kept low, etc.). For coppercopper, Clean-n-Brite Paste Flux is the flux of choice. For
copper-steel applications, TEC Liquid Flux is recommended as it is
ore aggressive at keeping the metal surfaces to be joined free of
m
oxides. TEC is a more corrosive flux however, and subsequent flux
residue removal is recommended.
Clean-n-Brite is a Lead-free, silver-bearing high-strength solder
used for applications requiring close joint clearances.
Clean-n-Brite 6 is a Lead-free, silver-bearing high-strength solder
used for applications requiring large joint clearances. It is the easiest
Silver-bearing soft solder to work with as temperature range permits
“bridging” loose fit-ups if necessary.
Clean-n-Brite No Lead is a Silver-bearing solder with good
strength used in potable watersystem applications requiring no lead.
MARS
NO.
SERVICE & INSTALLATION
78316
78317
78318
Clean-n-Brite 3.6 96.4 431° F 431° F 1 24
Clean-n-Brite 6 6 94 431° F 535° F 1 24
Clean-n-Brite No Lead 0.5 4 95.5 428° F 446° F 1 24
MARS Cross Reference Guide
MARS
NO.
78301
78302
78303
78304
78305
78306
78307
78308
78309
78310
78311
78314
78315
78316
78317
78318
78319
78320
Braze 450 (1oz.) 98000 76310 (Safety-Silv 45) Silvaloy A-45
Braze 450 (3oz.) 98001 76313 (Safety-Silv 45) Silvaloy A-45
Braze 450 (5oz.) 98002
Braze 505 (1oz.) 98070
Braze 505 (3oz.) 98071
Braze 505 (5oz.) 98072
Braze 560 (1oz.) 98060 75310 (Safety-Silv 56) Silvaloy A-56
Braze 505 F/C 98110
Clean-n-Brite 6 96010
Clean-n-Brite (no lead) 96150
Tec Liquid Flux 97000
Clean-n-Brite Flux 97020
COMPOSITION % TEMPERATURE
Ag Cu P MELT FLOW
HANDY
HARMON
Sil-Fos15 95150 61035 (Stay-Silv 15) Silvaloy 15
Sil-Fos 6M 95120
Sil-Fos 5 95060
Fos-Flo 7 95000 21035 (Stay-Silv 0) Silvaloy 0
Handy Flux 97030
Clean-n-Brite 96000
LUCAS
MILHAUPT
J.W. HARRIS ENGELHARD
66000 (Dynaflow)
41035 (Stay-Silv 5)
76315 (Safety-Silv 45)
40022 (Stay-Silv Flux)
10001 (Stay-Brite)
10009 (Stay-Brite 8)
15000 (Stay-Safe 50)*
40002 (Stay-Clean)
40027 (Stay-Clean
Solder Flux)
MARS
PACK
Silvaloy 6
Silvaloy 5
Silvaloy A-45
Ultra Flux
Silvabrite
Silvabrite S
Silvabrite 100
70001
71003
CASE
QTY.
* While this material does not have a chemistry exactly equivalent, it is similar in composition to Clean-n-Brite no lead and typically used in similar applications.
SI-74
The largest selection of motors, components and accessories for the HVAC/R Industry
Loading...