Mars 73150 User Manual
PVC Cement, Cleaner & Primer
MARS SERIES 730
Oatey All Purpose Cement - ABS, PVC, CPVC
Oatey all purpose cement is a heavy bodied, clear cement
recommended for use on ABS, PVC or CPVC pipe and fittings.
Forall pipe schedules, potable water pressure pipe, gas, conduit,
drain waste and vent pipe. Flows freely and provides a thicklayer
of cement on the pipe. Helps to fill gaps in larger diameter pipe
and loose fitting joints. Apply at temperature 40°F to 100°F.
Exceeds performance requirements of ASTM D-2564, D-2864,
D-2235, F-493. Special applicator brush cap for fast and easy
installation.
MARS
NO.
73161
73162
73163
DESCRIPTION
4 oz. clear 24
8 oz. clear 24
16 oz. clear 24
MARS
PACK
Oatey Heavy Duty Cement - PVC
Oatey heavy duty cement is recommended for use on pvc pipe
and fittings up to 12” in diameter for schedule 40 and schedule 80
potable water pressure pipe, gas, conduit, drain waste and vent
pipe. This heavy bodied cement flows freely and provides a thick
layer of cement on the pipe. A special brush cap applicatior is
provided.Apply at temperatures 40°F to 100°F. This clear cement
helps to fill gaps in larger diameter pipe and loose fitting joints.
Exceeds ASTM D-2564.
MARS
NO.
73165
73166
73167
DESCRIPTION
4 oz. clear 24
8 oz. clear 24
16 oz. clear 24
MARS
PACK
Oatey Clear Primer - NSF Listed - PVC, CPVC
Oatey clear primer is a clear aggressive primer for use on PVC and CPVC
pipe and fittings for all schedules and diameters. This NSF listed formula
removes all surface dirt, grease and grime as well as softens pipe in
preparation for solvent cement. MeetsASTM F-656.
MARS
NO.
73186
DESCRIPTION
16 oz. clear 24
MARS
PACK
Oatey All Weather Cement-PVC
Oatey all weather cement is recommended for use on PVC pipe
and fittings up to 6” in diameter. Formulated for fast initial set up at
temperatures down to 10°F, for schdule 40 and schedule 80
potable water pressure pipe, gas, conduit, drain waste and vent
pipe. This mediumbodied, clearcement flows freely and maintains
good gap filling properties. Apply at temperatures 10°F to 100°F.
Exceeds ASTM D-2564.
MARS
NO.
73156
73157
DESCRIPTION
16 oz. clear 24
32 oz. clear 12
MARS
PACK
Oatey Purple Primer - PVC, CPVC
Oatey purple primer is recommended for use on PVC and CPVC
pipe and fittings, all schedules and diameters. This purple tinted
aggressiveprimer is formulated to remove surface dirt, grease and
grime, as well as, soften the pipe surface to allow for a fast, secure
and permanent solvent weld. For use in area where code calls for
verification that a primer has been used. Exceeds ASTM F-656.
SERVICE & INSTALLATION
Oatey Regular Cement - PVC
Oatey regular cement is recommended for use on PVC pipe and
fittings up to 4” for DWV or schedule 40 and up to 2” for schedule
80 potable water pressure pipe, gas, conduit, drain waste and vent
pipe. It flows freely and sets up quickly. Apply at temperatures 40°F
to 100°F. Exceeds ASTM D-2564. Special brush top appliactor.
MARS
NO.
73174
73175
73176
73177
DESCRIPTION
4 oz. clear 24
8 oz. clear 24
16 oz. clear 24
32 oz. clear 12
MARS
PACK
Oatey Rain-R-Shine™Cement - PVC
Oatey Rain-R-Shine™ is a bluecoloredcement recommended
for PVC pipe and fittings up to 6” in diamter. A very fast setting
cement formulated for wet conditions and/or when quick
pressurization and fast installation is needed. For schedule 40
and schedule 80 potable water pressure pipe, irrigation, gas,
conduit, drain waste and vent pipe.Thismedium bodied cement
flows freely and covers with a thicker layer than regular PVC.
Apply at temperatures 40°F to 100°F.
MARS
NO.
73150
73151
DESCRIPTION
4 oz. blue 24
8 oz. blue 24
MARS
PACK
MARS
NO.
73178
73179
73180
73185
DESCRIPTION
4 oz. purple 24
8 oz. purple 24
16 oz. purple 24
32 oz. purple 24
MARS
PACK
Oatey All Purpose Cleaner - PVC, CPVC, ABS
Oatey all purpose cleaner is recommended for use on ABS,
PVC and CPVC pipe and fittings, all schedules and diameters.
This fastacting cleaner removessurface dirt,grease and grime.
Flows freely and evaporates quickly. Does not penetrate pipe
surface.Apply at temperatures 40°F to 100°F.
MARS
NO.
73170
73171
73172
DESCRIPTION
8 oz. clear 24
16 oz. clear 24
32 oz. clear 12
MARS
PACK
The largest selection of motors, components and accessories for the HVAC/R Industry
SI-89
Loading...