Mars 65402 Service Manual
Access Fittings & Service Valves
MARS SERIES 654
Brass Bodies - Half Unions
MARS brass bodies have a 1/4” standard male flare above the hex. Below the hex are
various threads, outside diameters and inside diameters for accepting different sizes of
tubing and connections. A flat top brass cap and teflon valve core are included.
65401, 02
MARS
NO.
65401
65402
65403
1/4” MPT dry seal x 1/4” male flare 5/16” I.D. hole
accomodates 5/16” O.D. tube. Qty. 2 per bag
/8” MPT dry seal x 1/4” male flare 1/4” I.D. hole
1
accomodates 1/4” O.D. tube. Qty. 6 per bag
1/4” male flare for 1/8” I D hole - accomodates
1/8” O.D. tube. (3/16”, 1/4”, 5/16” O.D. steps)
Brass Caps & Valve Cores
MARS
NO.
Round brass flat cap w/neoprene O-ring seal for 1/4”
Round brass cap w/ core wrench top and neoprene O-
ring seal for 1/4” flare, qty 6 per bag
Plastic core container - includes six valve cores and a
core wrench and thread chaser
Brass core remover container with wrench tip -
includes three valve cores
Valve core w/teflon seal, qty. 6 per bag 1
SERVICE & INSTALLATION
65408
65409
65410
65411
65412
DESCRIPTION
Qty 6 per bag
DESCRIPTION
flare, qty 6 per bag
MARS
PACK
1
1
1
MARS
PACK
1
1
1
1
65410
65408
65409
65411
Core Removal Tools With Ball Valve
MARS core removal tools are used to remove and replace valve cores in a 1/4” flare
without losing refrigerant. Because it has a ball valve inside rather than a stem-type valve,
the tool can be closedwithjust a quarter turn.This convenient compact size tool is ideal for
working in close quarters.
MARS
NO.
65418
65419
DESCRIPTION
Core removal tool 1
Core removal tool w/ 1/4” male flare side port 1
MARS
PACK
65412
65418
65419
SI-56
The largest selection of motors, components and accessories for the HVAC/R Industry
Loading...