Mars 65038 User Manual
Flaring Tools
Imperial
brass. This flaring tool flares and burnishes 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” OD
tubing. The faceted, hard chrome finished cone rolls out perfect 37° flares above
die block - then automatically burnishes flare face. Original wall thickness is
maintained at base of flare. Slip-on yoke permits use in tight quarters. The heat
treated dies grip tubing without scoring.
steel and other metal tubing. Three rollers in flaring cone roll out a 37° flare above
die block. There is an extension on the yoke for clamping in vise. This flaring tool is
for 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” OD tubing and is furnished in a plastic kit.
and 5/8” OD tubing. This tool features a self-centering yoke with swivel-type, hard
chrome finished flaring cone to form better flares with less effort. The yoke is
designed to permit flaring where there is little space between nut and tube end. This
flaring tool is for use on soft copper, aluminum and brass tubing.
3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” OD tubing. The flares are rolled out above die
bar by a super-smooth faceted cone. Automatically burnishes flare face. The slip-on
yoke permits use in tight quarters. Heat treated dies grip tubing without scoring. For
use on soft copper, aluminum and brass tubing.
tubing. This 45° flaring tool is for use on soft copper, aluminum and brass tubing.
MARS #65039 features a unique, self-adjusted, tube holding mechanism which
permits use in tight quarters. The faceted, hard chrome finished cone rolls out and
burnishes a perfect 45° flare above the tube holding mechanism.
MARS #65035, Rol-Air®flaringtool, is used for soft copper, aluminum and
MARS #65036, 37° flaring tool, is for use on copper, aluminum, steel, stainless
Imperialʼs 45° flaring tool, MARS #65037, is for 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”
The 45° Rol-Air
Imperialʼs Grabber™ Rol-Air
®
flaring tool, MARS #65038, is used for flaring and burnishing
®
flaring tool flares and burnishes 3/16” to 5/8” OD
Tubing Tools
MARS SERIES 650
65035
SERVICE & INSTALLATION
65037
65038
MARS
NO.
65035
65037
65038
65039
65046
65047
65048
65049
MFG.
NO.
507FB
Rol-Air
195FC 45° for 3/16” to 5/8” OD 10
500FC
525F
Rol-Air
Grabber™ Rol-Air
DESCRIPTION
®
37° for 3/16” to 5/8” OD
®
45° for 3/16” to 5/8” OD
®
45° for 3/16” to 5/8” OD
CASE
QTY.
10
10
103FS 45° for 3/4”, 7/8”, 1” OD 1
203FA 45° for 5/8” to1-1/8” OD 1
296FC 45° for 3/16” to 5/8” OD 1
300FB Hi Duty 45° for 3/16” to 5/8” OD 1
1
Pinch Off Tool
Pinch-off tool temporarily closessoft copper, aluminum or steel tubing so no liquid
or gas passes. Lets you disconnect line while making repairs without loss of liquid or
gas. Also opens tubing and rounds it back into shape. For use on 1/4”, 3/8” and 1/2”
OD tubing.
MARS
NO.
65050
MFG.
NO.
DESCRIPTION
CASE
QTY.
105FF Pinch off tool (copper tubing) 1
65039
65046
65047
65048
65049
The largest selection of motors, components and accessories for the HVAC/R Industry
65050
SI-67
Loading...