Mars 60025 User Manual
ACC Contactors
®
MARS SERIES 600
COMPONENT
60030
60025
30-40 Amp Type C Power Contactors
ne Pole With Shunt
O
The Type C contactor is used extensively in the Air Conditioning industry
for single phase applications.
Two Pole Contactors
For applications where breaking both sides of the line and added safety
is very important, the two pole Type C is the right selection.
Specifications:
• Line & load terminations: 10-32 phillips/slotted hex, washer head,
box lug
• Tightening Torque: 25 in. lb.
• Quick connects: quad .250 standard (40 amp models have dual QC.)
• Coil termination: double .250 on each side
• Permissable ambient temperature: operate +60C/-40C,
storage +90C/-50C
• Contact material: silver cadmium oxide
• Approximate mechanical life cycles: 1,000,000
• 30 amp models do not include covers. Add CJ suffix to part numbers if
covers are desired (10 pc. min.) There will be an additional charge. 40
amp model is standard with covers.
• Dimensions & Accessories: pages C24
U.L. 508 GUIDE NO. NLDX2 / FILE NO. E75492
C.S.A. C22.2 NO. 14 / FILE NO. LR49598 or LR47771
1 Pole w/Shunt, 2 Pole Power Contactors, w/ Taped Wound Coils
1 POLE w/SHUNT 2 POLE
MARS NO.
60025
Note: Replacement coils, contacts & auxiliary switches are not available for “C” contactors. (1) Nominal rated voltage at 50 Hz are 110V for U20/220V for U30 and 240V
for U50.
AH
MODEL
C301NU10
MARS NO.
60030
60031
60032
60045
60046
60047
AH
MODEL
C302U10
C302U20
C302U30
C402U10
C402U20
C402U30
COIL VOLTS
50/60 HZ
(1)
24
120
208-240
24
120
208-240
LINE/
LOAD
VOLTS
240/277
480 75 125
240/277
480 200 200
FULL
LOAD
AMPS
30
40
LOCKED
ROTOR AMPS
1P 2P
150 150
240 240
RES.
AMPS
1P 2P
40 40
50 50
Technical Data: 1 Pole, 1 Pole w/Shunt, 2 pole, - 20 - 40 Amps
AC COIL DATA (50/60 Hz) VOLTAGE 1 POLE VOLTAGE 2 POLE
Nominal Coil Voltage 24 120 240 277 480 24 120 240 277 480
Maximum Pick Up Volts 18 88 177 221 384 18 88 177 221 384
Drop Out Volts Range 6-15 20-70 40-140 50-180 (1) 6-15 20-70 40-140 50-180 (1)
Maximum Pick Up Time Milliseconds 30 30 30 30 30 30 30 30 30 30
Maximum Drop Out Time Milliseconds 20 20 20 20 20 20 20 20 20 20
Maximum Inrush VA 50 Hz 23 26 25 25 25 38 40 40 40 40
Maximum Inrush VA 60 Hz 22 24 23 23 23 35 37 37 30 37
Maximum Sealed VA 50 Hz 9 9 8 8 8 10 10 10 10 10
Maximum Sealed VA 60 Hz 6.5 7 7 7 7 8 8 8 6 8
C-24
The largest selection of motors, components, and accessories for the HVAC/R Industry
Loading...