Mars 41509 User Manual

Air Moving Components

MARS SERIES 400

Belt Drive Blower Wheels

airMARS belt drive blower wheels with forward curved

lades are constructed out of galvanized steel with offset

b
tab-locked blades for superior strength. The unique
design allows higher operating speeds and lower noise
levels on blower wheels from 9” to 40”. All wheels are
balanced both statically and dynamically to a factor of
Q=6.3. These wheels are available in both single and
dual blower assemblies with galvanized steel housings.

44 separate quality ch ecks ensure the production
process for airMARS belt drive blower wheels. Rigorous
qu ality standa rds, hi gh qual ity ra w mater ial and
experienced manufacturing all work together to make
airMARS blower wheels your best choice.

MARS WHEEL WHEEL NOMINAL MAX.

NO. DESCRIPTION DIA. WIDTH BORE DIA. X W. LAU # RPM

41507 10-8 BD 0.75 WHL 10.62 8.06 0.75 10-8 008361-12 2400

41508 10-9 BD 0.75 WHL 10.62 9.50 0.75 10-9 008362-12 2100

41510 10-10 BD 0.62 WHL 10.62 10.68 0.75 10-10 008360-10 1800

41509 10-10 BD 0.75 WHL 10.62 10.68 0.62 10-10 008360-12 1800

41517 12-11 BD 1.00 WHL 12.87 11.12 1.00 12-11 009867-16 2000

41520 12-12 BD 1.00 WHL 12.87 12.87 1.00 12-12 008403-16 1800

41525 12-15 BD 1.00 WHL 12.87 15.00 1.00 12-15 008747-16 1100

41533 15-15 BD 1.00 WHL 15.12 15.00 1.00 15-15 008276-16 1600

Special Dimension Belt Drive Blower Wheels

MARS WHEEL WHEEL MAX MAX NO. OF

NO. DIA. WIDTH BORE RPM BHP BLADES

41575 9.84 8.86 0.75 2238 3 38

The largest selection of motors, components and accessories for the HVAC/R Industry

airMARS

AM-27