Mars 40003 User Manual

Air Moving Components
MARS SERIES 400
airMARS Accessories
Universal Hex Hubs
ARS Universal Hex Hubs are designed to provide
M a firm mechanical fit with hex or round bore adapter fan blades. These hubs are machined steel, designed with tri-point mount for secure spider/hub connections. MARS Universal Hex Hubs include 2 set screws, for shaft fastening, offset at 90 degrees.
40851
Universal Hex Hubs
40852
MARS PER
NO. BORE PACK
40002 1/4” 1
40003 5/16” 1
40004 3/8” 1
40005 1/2” 1
40006 5/8” 1
40007 3/4” 1
MARS DESCRIPTION
NO.
40851 Fan Blade Pitch Gauge
Follow these steps to measure propeller rotation and pitch:
Step 1: Position the faceplate of the
gauge on the blade of the fan.
Step 2: Place the foot of the wire body of
the Pitch Guage on the center section (spider) of the fan.
Step 3: The pointer gives a direct
reading of the pitch in degrees, and the clockwise/counter­clockwise markings indicate the rotation.
airMARS
MARS DESCRIPTION
NO.
40852 Fan Blade & Hub Puller
The largest selection of motors, components and accessories for the HVAC/R Industry
AM-21
Loading...