Mars 20203 User Manual
Spun Copper Driers
MARS SERIES 201
MARS Spun Drier Capacity Table
Features:
• Recommended for use on original equipment, residential and commercial
refrigerators, freezers and air conditioners
• XH-9 beaded molecular sieve for maximum water capacity
n HFC refrigerants
i
• High quality – high capacity
• Hermetically sealed
• Easy break off grooved ends
• Copper shells and end tubes
• Compatible with R134
DROPS OF WATER REMOVED
SERVICE & INSTALLATION
MARS
NO
20203
20303
20209
20210
20310
20211
20311
20212
20213
20214
20215
20216
DESCRIPTION
Plugged Ends 37.5 34 34 32 1/3 1/2
Plugged Ends 37.5 34 34 32 1/3 1/2
Non-Directional 37.5 34 34 32 1/3 1/2
Fused Ends 37.5 34 34 32 1/3 1/2
Fused Ends 37.5 34 34 32 1/3 1/2
Charging Drier 74 38 68 64 3/4 1
Charging Drier 74 38 68 64 3/4 1
Step Down Drier 99 93 95 90 1 2
Double Inlet 74 68 68 64 3/4 1
Fused Ends 74 68 68 64 3/4 1
Charging Drier 37.5 34 34 32 1/3 1
Step Down Drier 74 68 68 64 3/4 1
R-12 R-22
75˚ 125˚ 75˚ 125˚ R-12 R-22
RECOMMENDED
TONNAGE
20203
20303
20211
20311
20209
20210
20310
20212
20213
MARS Spun Copper Driers
MARS
20203
20303
20209
20210
20310
20211
20311
20212
20213
20214
20215
20216
SI-64
DESCRIPTION INLET OUTLET LENGTH DIA.
NO
Plugged Ends 1/4" OD 1/4" OD 7-3/4" 1" 1
Plugged Ends 1/4" OD 1/4" OD 7-3/4" 1" 50
Non-Directional 1/4" OD 1/4" OD 8-1/2" 3/4" 1
Fused Ends 1/4" OD 1/4" OD 8-3/4" 3/4" 1
Fused Ends 1/4" OD 1/4" OD 8-3/4" 3/4" 50
Charging Drier 1/4" OD 1/4" Flare 1/4" OD or Cap. 8-3/4" 1" 1
Charging Drier 1/4" OD 1/4" Flare 1/4" OD or Cap. 8-3/4" 1" 50
Step Down Drier 5/16"OD 5/16" OD or Cap. 10-3/4" 1" 1
Double Inlet (2) 1/4" OD 1/4" OD 8-3/4" 1" 1
Fused Ends 1/4" ID 1/4" OD 1/4" OD or Cap. 9" 1" 1
Charging Drier 1/4" ID 1/4"OD 1/4"Flare 1/4" OD or Cap. 9" 3/4" 1
Step Down Drier 3/16, 1/4, 5/16" ID 5/16" ID or Cap. 8-3/4" 1" 1
The largest selection of motors, components and accessories for the HVAC/R Industry
MARS
PACK
20214
20215
20216
Loading...