Mars 20106 User Manual

Liquid Line Filter Driers

MARS SERIES 201

MARS Liquid Line Filter Driers

The MARS Liquid Line Filter Driers are designed to offer
complete protection of your refrigerant system. The desiccant
block is a carefully selected blend of molecular sieve and
activated alumina, providing for maximum removal of moisture,
acid, and foreign materials. This molded desiccant block allows
for efficient filtration and retention of solid contaminants, while
insuring minimum pressure drop. The solid molded block

xposes maximum surface area and provides even distribution of

e
filtered material as the refrigerant flows through the drier. These
driers are intended for use on R-134A, R-404A, R-410A, R-507,
R-12, R-500, R-502

Features & Benefits:

• High moisture removal

• High organic & inorganic acid removal

• Solid block desiccant core

• For use with HCFCs, CFCs, and the lubricants

that go with them

• Nickel plated SAE flare and solid copper ODF fittings

• Corrosion resistant

• Maximum working pressure 600 PSIG

• Minimum burst pressure 2500 PSIG

• UL & CSA listed

20119

SERVICE & INSTALLATION

MARS

NO.

20106
20107
20108
20109
20111
20112
20113
20114
20115
20116
20117
20118
20119
20120
20121
20123
20125
20126
20127
20128
20129
20130
20131

MODEL

NO.

MLD-032 1/4 SAE 4.32 1.63 2.0 1.9 1.2 12

MLD-032S 1/4 ODF 3.76 1.63 3.0 2.8 1.8 12

MLD-052 1/4 SAE 4.88 2.50 2.1 2.0 1.3 12
MLD-052S 1/4 ODF 4.33 2.50 3.0 2.9 1.9 12
MLD-053S 3/8 ODF 4.53 2.50 6.0 5.8 3.8 12

MLD-082 1/4 SAE 5.80 2.50 2.1 2.1 1.3 12
MLD-082S 1/4 ODF 5.24 2.50 3.1 3.0 1.9 12

MLD-083 3/8 SAE 6.10 2.50 4.9 4.7 3.0 12
MLD-083S 3/8 ODF 5.43 2.50 6.2 5.9 3.9 12

MLD-162 1/4 SAE 6.58 2.50 2.1 2.1 1.3 12
MLD-162S 1/4 ODF 6.02 2.50 3.1 3.0 1.9 12

MLD-163 3/8 SAE 6.89 2.50 5.1 4.9 3.2 12
MLD-163S 3/8 ODF 6.22 2.50 6.4 6.2 4.0 12

MLD-164 1/2 SAE 7.13 2.50 8.8 8.4 5.5 12
MLD-164S 1/2 ODF 6.27 2.50 9.2 8.8 5.7 12
MLD-165S 5/8 ODF 6.54 2.50 15.3 14.6 9.5 6
MLD-303S 3/8 ODF 8.90 3.00 7.5 7.2 4.7 6

MLD-304 1/2 SAE 9.80 3.00 9.9 9.5 6.2 6
MLD-304S 1/2 ODF 8.94 3.00 12.3 11.8 7.7 6

MLD-305 5/8 SAE 10.18 3.00 12.6 12.1 7.9 6
MLD-305S 5/8 ODF 9.21 3.00 16.8 16.1 10.5 6
MLD-306S 3/4 ODF 9.63 3.00 18.1 17.4 11.3 6
MLD-307S 7/8 ODF 9.80 3.00 19.0 18.2 11.8 6

CONNECTIONS

SIZE & TYPE

DIMENSIONS Flow Capacity1Tons @ 1 PSI

A B R-134A R-22/R410A R404A/R507

CASE

QTY.

1

All ratings in accordance with ARI standard 710-04, 86ºF Liquid Refrigerant Temperature, 5ºF Saturated Temperature

4.0 lbs./min./ton for R-134a, 2.9 lbs./min./ton for R-22, 4.0 lbs./min/ton for R-404A/R-507

SI-58

The largest selection of motors, components and accessories for the HVAC/R Industry