Mars 08550 User Manual

08552

08553

OCPD*

ECM Motor Accessories

MARS SERIES 950

ECM Protectors

Saves Equipment

ECM protectors plug into existing motor connectors or plugs. They help to protect
these valuable motors from voltage spikes, surges, and transients that often damage
them.

ast Installation

F

These protectors simply plug in between the motor connector and the existing wiring
harness.
A ground strap with a ring terminal is provided for additional protection.

Protect Your Investment

The most common
cause of ECM motor
failure is damage to the
electronics module as a
result of poorly
conditioned incoming
power.

ECM Repair Kit

Repairs many ECM motor modules that have been damaged by voltage
problems and power surges

• Full instructions included in kit

• Kit includes OCPD device and helpful circuit board releaser tool

• Using the kit requires a soldering gun or iron and rosin core solder

ECM’s have *Over Current Protection Devices that are designed to keep excessive
power from damaging other system components. Frequently, only this part needs
replacement to restore an expensive ECM to an operation condition.

Not every ECM module can be repaired. Because of this, the repair kit is not guaranteed
to fix every motor-but because of the motorʼs high cost vs. the repair kitʼs low cost- itʼs often worth
the effort.

MARS MARS

NO. DESCRIPTION PACK

08551 ECM Repair Kit 1

MARS MARS

NO. USED ON PACK

08552 GE X-13 ECM 1
08553 OEM ECM Applications 1

MOTOR

ACCESSORIES

Variable Speed Zebra

Complete diagnostics for systems
where an ECM motor is not working
properly

Uses simple-to-operate

microprocessor controlled tests
to:

• accurately diagnose exactly
which component has failed in a
variable speed system that is
not working correctly

• assist in system setup by
reporting CFM airflow and motor
RPM as room vents and other
controls are adjusted

• allows easy adjustment of all
available settings and options
on ECM blower motors to obtain
maximum customer comfort

MARS MARS

NO. DESCRIPTION PACK

08550 ECM Diagnostic System 1

The largest selection of motors, component s and accessories for the HVAC/R Industry

Universal Zebra

A tool designed to troubleshoot every
ECM motor in HVAC/R systems!

• Three 3-position switches test up to 6
speeds

• LED’s indicate power and signals being
sent

• Rugged case protects your tools & leads

Adapters for Universal Zebra

• Adapters quickly plug into motor and
Universal Zebra

• Magnetic reference cards show what
each switch does & what each LED
means for that motor

MARS MARS

NO. DESCRIPTION PACK

08554 ECM Diagnostic System 1

MARS #

08555 Adapter “A” – for GE 2.0 & 2.3 ECM’s
08556 Adapter “B” – for Genteq 3.0 ECM’s
08557 Adapter “C” – for X-13 & X-mtr ECM’s
08558 Adapter “E” – for ECM 142 & Signal Select

08559 Adapter “F” – for Evergreen IM
08560 24” Main Harness for Universal Zebra

ECM’s

(Extension or Replacement)

M-75