Unit Bearing Motors - PSC - GE
312 inch dia. MARS SERIES 050
51 Frame Unit Bearing
Cast Iron Permanent Split
Capacitor (PSC) Motors
This new PSC GE unit bearing motor is designed for
refrigeration, food/beverage coolers, blowers and fans,
vending machines, walk-in coolers, condensing units and
other similar applications. Unique design features in the
bearing/lubrication and insulation systems provide years
of dependable operation.
Cross Reference
MARS PSC
REPLACEMENT NO.
05315 5KPM81HFL0095 05211 5KSM81HFL0008
05415 5KPM81HFL1086 05411 5KSM81HFL1001
05425 5KPM81HFL1087 05421 5KSM81HFL1010
05815 5KPM81HFL2046S 05811 5KSM81HFL3004S
05825 5KPM81HFL3047S 05821 5KSM81HFL3006S
MFG NO.
MARS SHADED
POLE NO.
MFG NO.
Standard features:
• -20°C to 70°C Oil
• Impedance protection except 16w - auto overload
• Threaded shaft 1/4 - 20, 0.51/0.41” long
• 26 inch lead length with 1/2” bare wire stripped
• Single speed
• Totally enclosed air over (TEAO) designs
• Cast Iron construction
• One side pad
• Small nose rotor
• No external capacitor needed
• Individually boxed
• Accessories on pages M-73 to M-75
Easy installation
• All motors have self-tapping holes for use with selftapping screws
• Side pad or opposite shaft end mounting
• Drop-in replacement for existing 81mm unit bearing
motors
GE
MARS NO. MFG NO. HP VOLTS
05315
05325
05415
05425
05815
05825
5KPM81HFL0095 5W 115 0.2 CW 3.15 2.36
5KPM81HFL0096 5W 230 0.1 CW 3.15 2.36
5KPM81HFL1086 9W 115 0.3 CW 3.82 2.93
5KPM81HFL1087 9W 230 0.2 CW 3.82 2.93
5KPM81HFL3046S 16W 115 0.6 CW 3.98 3.33
5KPM81HFL3047S 16W 230 0.3 CW 3.98 3.33
The largest selection of motors, components and accessories for the HVAC/R Industry
FULL LOAD
AMPS
ROT. A (in) B (in)
Energy Savings Per Year
Duty Cycle
100%
$12.40 $9.92 $6.20 1
12.40 9.92 6.20 1
13.00 10.40 6.50 1
13.00 10.40 6.50 1
28.70 22.96 14.35 1
28.70 22.96 14.35 1
Duty Cycle
80%
Duty Cycle
50%
MARS
PACK
M-33