Mars 03404 User Manual

Condenser Fan, Single Phase, PSC

C

A

B

512 inch dia. MARS SERIES 098

Vertical Outdoor Condenser
Fan Motors Shaft-Up/Down

GE up/down outdoor condenser fan motors are designed for either vertical
shaft-up or shaft-down applications. Shell and end shields are enclosed for
weather protection. A weep hole is provided in each end shield to allow

ondensate to drain. A plastic plug is provided to seal the weep hole in the end

c
shield exposed to the weather. All of these motors are suitable for air
conditioning or heat pump applications. All feature reversible rotation, 208-230
volts, six inch shaft length and extended thru bolts extending from both ends.

GE by RBC

Reversible Rotation

MARS CAP DIMENSIONS

NO. GE NO. HP VOLTS AMPS RPM REQ. A B C

* Heat Shield

Specifications:

60 Hertz

•
Single phase

•
Overload protected

•
Fan duty, continuous, air over

•
26 inch leads

•
Totally enclosed, non-ventilated

•
Class B insulation

•

C

Features:

• Up/down design

• Thru bolt or band mounting

• All angle sleeve or ball bearings

• Water slinger on shaft

• Serrated end cap on shaft end only

• For air conditioning or heat pumps

• Full six inch shaft length with two full flats at 90°

• Reversible rotation

• For accessories, see pages M–73 to M–75

A

B

825 RPM - Single Speed - All Angle Sleeve Bearings - 8 Pole

03725* 5KCP39DFAD06S 1/8 208-230 0.85 825 5/370 6.5 4.23 1/2
03403* 5KCP39HFAD05S 1/6 208-230 1.00 825 5/370 6.0 4.23 1/2
03404* 5KCP39JFAD07S 1/4 208-230 1.50 825 7.5/370 6.0 5.23 1/2
03405* 5KCP39NFAD09S 1/3 208-230 2.20 825 10/370 6.0 5.73 1/2
03746* 5KCP39TFAD10S 1/2 208-230 2.80 825 20/370 6.5 6.48 1/2

1075 RPM - Single Speed - Standard Efficiency - All Angle Sleeve Bearings - 6 Pole

03727 5KCP39DGS375S 1/6 208-230 1.00 1075 5/370 6.0 4.71 1/2
03727HS* 5KCP39DGY797S 1/6 208-230 1.00 1075 5/370 6.0 4.71 1/2
03728 5KCP39FGM599S 1/4 208-230 1.80 1075 5/370 6.0 4.25 1/2
03728HS* 5KCP39GGY769S 1/4 208-230 1.80 1075 5/370 6.0 4.25 1/2
03729 5KCP39LGS407S 1/3 208-230 2.30 1075 7.5/370 6.0 5.70 1/2
03729HS* 5KCP39LGY801S 1/3 208-230 2.30 1075 7.5/370 6.0 5.70 1/2
03759 5KCP39LGT378S 1/3 575 1.10 1075 7.5/370 6.0 5.75 1/2
03730 5KCP39PGS618S 1/2 208-230 3.50 1075 10/370 6.0 6.50 1/2
03730HS* 5KCP39RGY799S 1/2 208-230 3.50 1075 10/370 6.0 6.50 1/2
03760 5KCP39PGT377S 1/2 575 1.50 1075 7.5/370 6.0 5.75 1/2
03731 5KCP39SGT039S 3/4 208-230 4.70 1075 10/370 6.0 5.75 1/2
03731HS* 5KCP39SGY805S 3/4 208-230 4.70 1075 10/370 6.0 5.75 1/2

M-42

The largest selection of motors, components and accessories for the HVAC/R Industry