Mars 03201 User Manual
* Heat Shield
C
A
B
Condenser Fan Motors - PSC
512 inch dia. MARS SERIES 098
Vertical Outdoor Condenser
Fan Motors Shaft-Up/Down
E up/down outdoor condenser fan motors are designed for either vertical
G
shaft-up or shaft-down applications. Shell and end shields are enclosed for
weather protection. A weep hole is provided in each end shield to allow
condensate to drain. A plastic plug is provided to seal the weep hole in the end
shield exposed to the weather. All of these motors are suitable for air
conditioning or heat pump applications. All feature reversible rotation, 208-230
volts, six inch shaft length and extended thru bolts extending from both ends.
Specifications:
60 Hertz
•
Single phase
•
Overload protected
•
Fan duty, continuous, air over
•
26 inch leads
•
Totally enclosed, non-ventilated
•
Class B insulation
•
C
A
GE by RBC
Features:
• Up/down design
• Thru bolt or band mounting
• All angle sleeve or ball bearings
• Water slinger on shaft
• Serrated end cap on shaft end only
• For air conditioning or heat pumps
• Full six inch shaft length with two full flats at 90°
• Reversible rotation
• For accessories, see pages M–73 to M–75
B
Reversible Rotation
MARS CAP DIMENSIONS
NO. GE NO. HP VOLTS AMPS RPM
(1)
REQ. A B C
825 RPM - Single Speed - Standard Efficiency - Ball Bearings - 8 Pole
03201 5KCP39EGL248S 1/10 208-230 0.80 825 5/370 6.0 4.30 1/2
03202* 5KCP39DFBA81S 1/8 208-230 1.10 825 5/370 6.0 4.30 1/2
03203* 5KCP39HFBA79S 1/6 208-230 1.00 825 5/370 6.0 4.30 1/2
03204* 5KCP39JFBA83 1/4 208-230 1.50 825 7.5/370 6.0 5.03 1/2
03205* 5KCP39NFBA82S 1/3 208-230 2.20 825 10/370 6.0 5.80 1/2
03747* 5KCP39TFBA84S 1/2 208-230 2.80 825 20/370 6.5 6.48 1/2
1075 RPM - Single Speed - Standard Efficiency - Ball Bearings - 6 Pole
03726 * 5KCP39DGU716S 1/6 208-230 1.00 1075 5/370 6.5 3.98 1/2
(2)
03732
03733
03734
03735
(1) Low speed approximately 300 RPM less than high speed depending on fan load (2) Both end shields flat, no serrated end cap
* 5KCP39FGL114S 1/4 208-230 1.80 1075 5/370 6.0 4.23 1/2
(2)
* 5KCP39LGL786S 1/3 208-230 2.40 1075 7.5/370 6.0 4.48 1/2
(2)
* 5KCP39PGL787S 1/2 208-230 3.70 1075 10/370 6.0 5.23 1/2
(2)
* 5KCP39SGL788S 3/4 208-230 5.10 1075 10/370 6.0 5.98 1/2
The largest selection of motors, components and accessories for the HVAC/R Industry
M-41
Loading...