Mars 03092 User Manual
Double Shaft Fan & Blower Motors - PSC
B
C
A
D
C
B
A
512 inch dia. MARS SERIES 035
PSC Motors Replace
5KCP32 & 5KCP38
Features:
Energy $aver
•
Replace GE 5KCP32-38
•
All angle sleeve bearings
•
Two-speed, 1075/775 RPM
•
Extended thru bolts, base included, plus 4 split rings
•
14 inch leads
•
• For accessories see pages M–73 to M–75
Specifications:
Single phase, 60/50 Hertz
•
Open construction
•
Overload protected
•
Fan duty, continuous, air over
•
3 inch shaft height when base mounted
•
®
(2)
double shaft
GE by RBC
1075/775 RPM
MARS GE NO. ROT CAP. DIMENSIONS
NO. 5KCP HP VOLTS AMPS LE REQUIRED A B CD
03091 39KGD368T 1/3 208-230 2.4 CCW 5/370 6.50 6.46 9.00 1/2
(2)
03092
(1) Approximately 300 RPM differential between speeds depending on fan load
(2) 60 Hertz only
(1)
39NGD369T 1/2 208-230 3.8 CCW 5/370 8.00 6.46 8.50 1/2
5KCP39 PSC Double
Shaft Motors
Features:
All angle sleeve bearings
•
3 speed, 1075/925/775 RPM
•
Extended thru bolts
•
Base mount using mounting kit 08095 and
•
appropriate base
Double1/2 inch diameter shafts
•
• For accessories see pages M–73 to M–75
Specifications:
Single phase, 60/50 Hertz
•
Overload protected
•
Fan duty, continuous, air over
•
Open construction
•
Requires 5 mfd, 370 volt capacitor (MARS No. 12005)
•
14 inch numbered leads
1075/925/775 RPM
(1)
•
MARS GE NO. ROT DIMENSIONS BASE
NO. 5KCP39 HP VOLTS AMPS RPM
03656 CGA402T 1/6 208-230 1.0 1075/975/775 CCW 7.50 3.75 8.75 1/2 08053
03676 FGA403T 1/4 208-230 1.7 1075/975/775 CCW 8.50 4.00 7.45 1/2 08054
03686 JGA406T 1/3 208-230 2.5 1075/975/775 CCW 7.75 4.75 7.50 1/2 08057
03696 NGA407T 1/2 208-230 3.5 1075/975/775 CCW 7.50 5.25 7.25 1/2 08060
(1) Approximately 150 RPM differential between speeds depending on fan load (2) Requires base and 08095 mounting kit
The largest selection of motors, components and accessories for the HVAC/R Industry
(1)
LE A B CDNO.
(2)
M-49
Loading...