Mars 03027 User Manual
Condenser Fan Motors - PSC
C
A
B
512 inch dia. MARS SERIES 098
All Angle And Shaft Up
Outdoor Condenser Fan
Motors
GE outdoor condenser fan motors are available for
vertical shaft-up or vertical shaft-down applications.
Vertical shaft-up models are also suitable for horizontal
mounting. Add MARS No. 08105 resilient rings to base
mount. All are electrically reversible and have full six inch
shaft lengths. Models are available with sleeve or ball
bearings, single or two speed in high efficiency or
standard efficiency ratings.
Features:
•
•
•
Specifications:
Class B insulation
•
GE by RBC
single phase, 60/50 Hertz
•
automatic thermal overload
•
protected
fan duty, continuous, air over
•
26 inch leads
•
•
•
• For accessories, see pages M-73 to M-75
Reversible rotation
Thru bolt or band mounting
Water slinger on shaft
Serrated end caps on vertical shaft-up models
Full six inch shaft length
1075 RPM - Reversible Rotation - Energy $aver®- 6 Pole
MARS GE NO. CAP DIMENSIONS
NO. 5KCP39 HP VOLTS AMPS RPM
(2)
REQ. A B C
Two Speed - All Angle Sleeve Bearings - Vertical Shaft Up/Down - 6 Pole
(3)
03227
03228
03229
03230
(3)
(3)
(3)
EGG401T 1/6 208-230 1.0 1075 5/370 6.0 4.00 1/2
HGG402T 1/4 208-230 1.6 1075 5/370 6.0 4.50 1/2
MGG403T 1/3 208-230 2.4 1075 7.5/370 6.0 5.00 1/2
PGG404T 1/2 208-230 3.8 1075 10/370 6.0 5.50 1/2
Shaft-Up - Two Speed - Sleeve Bearings - 6 Pole
(1)
03027
03028
03029
03030
(1)
(1)
(1)
DGA768T 1/6 208-230 0.9 1075 5/370 6.0 3.75 1/2
GGA769T 1/4 208-230 1.5 1075 5/370 6.0 4.25 1/2
LGA770T 1/3 208-230 2.1 1075 7.5/370 6.0 5.00 1/2
NGS429S 1/2 208-230 3.2 1075 10/370 6.0 5.50 1/2
Shaft-Up - Two Speed - Ball Bearings - 6 Pole
(1)
03031
(1)
03032
(1)
03048
(1) Lead-end endshield open construction
(2) Low speed approximately 300 RPM less than high speed depending on fan load
(3) 60 Hz operation only
LGC003T 1/3 208-230 2.1 1075 7.5/370 6.0 4.98 1/2
NGL785S 1/2 208-230 3.2 1075 10/370 6.0 5.48 1/2
NGL762S 3/4 208-230 3.9 1075 15/370 6.0 5.48 1/2
M-40
The largest selection of motors, components and accessories for the HVAC/R Industry
Loading...