One-On-One
™
Direct Replacement Motors
Lennox (con’t)
MARS
NO.
D2818
PSC, ball bearing, 5/8 inch dia. keyed shaft, 15@370V capacitor required (MARS No. 12010), not a
direct replacement for 5KCP49SG1010S, but is an acceptable substitute
Replaces: P-8-8711, 5KCP49SG1010S
D2816
PSC, ball bearing, 5/8 inch dia. shaft, 20@370V capacitor required (MARS No. 12014)
Replaces: P-8-8326, 5KCP49SG1053S
02745
5 inch diam., open, resilient
MFG. NO HP VOLTS
- 3/4 - 1/3 230 1075/2 REV 5 - 2.2 4.50 7.75 -
- 1 - 1/2 - 1/3 115 1075/3 REV
5KSP29KK7537S
1/5 115 1050/3
RPM/
SPEEDS
ROT AMPS
11.8 - 6.3 -
3.9
CCW
OSE
7.6 2.5 4.75 –
DIMENSIONS
A B C
4.00 7.75 -
Replaces: GE 5KSP29KK1542S; Lennox P-8-9662
03050
03082
03144
5KCP39PG9701S
5 1/2 inch diam., open 2 1/2 inch resilient rings, 4 MFD @ 370V capacitor required (MARS No. 12004)
Replaces: 5KCP39PG3490S; Fasco D2017, D2817; Johnstone S-87-957;
Lennox P8-9080;Marathon X209; Universal 117
5KCP39HGK018T
5 1/2 inch diam., open 2 1/2 inch resilient rings, 5 MFD @ 370V capacitor required (MARS No. 12005)
Replaces: 5KCP39HG9174S, 5K55HXENB8874; GE Stock No. 3082; Fasco 71206-0107,
D812; Johnstone 388-257; Lennox P-8-7505; Marathon 48A 11650; Universal 565
5KCP39HGT584S
5 1/2 inch diam., open, torsion flex mounting, 5 MFD @ 370V capacitor required
(MARS No. 12005), terminal block
1/3 230 825/1
1/3 115 1075/4
1/3 115 1075/4
CCW
OSE
CCW
OSE
CCW
OSE
3.2 3.0 6.8 –
6.0 2.5 5.3 –
6.1 4.0 4.25 –
ONE-ON-ONE
Replaces: GE 5KCP39HGP580S; Lennox 45H3101
The largest selection of motors, components and accessories for the HVAC/R Industry
O-63