Condenser Fan Motors - PSC
5 inch dia. MARS SERIES 029
“Cap-Can” Construction
Vertical Shaft Down Condenser
Fan And Heat Pump Motors
These new permanent split capacitor motors from GE are
designed for use in residential outdoor condenser fan and
heat pump units (primarily up to 3.5 tons), requiring
vertical shaft down with stud or flange mounting.
Features:
• “Cap-Can” construction
• Automatic thermal overload protection
• #8-32 extended stud or flange mount
• Water slinger on shaft
• Vertical shaft down mounting orientation
• CW or CCW rotation in several ratings
• Designed for 370 volt capacitor (not furnished)
• Ball bearings
• Class B insulation
• for accessories, see pages M–73 to M–75
GE by RBC
Dimensions:
B
MARS ROT 370V CAP DIMENSIONS
NO. GE NO. HP RPM AMPS OSE REQUIRED A B C
02243 5KCP29DCA323S 1/10 1100 0.74 CW 5 MFD 2.75 3.35 1/2”
02244 5KCP29JCA324S 1/4 1075 1.7 CW 7.5 MFD 2.75 3.85 1/2”
02245 5KCP29JCA325S 1/4 1075 1.7 CCW 7.5 MFD 2.75 3.85 1/2”
02246 5KCP29HCA326S 1/5 1060 1.6 CW 5 MFD 2.75 3.85 1/2”
02247 5KCP29JCA327S 1/6 1100 1.3 CCW 5 MFD 2.75 3.85 1/2”
02248 5KCP29ECA328S 1/8 1075 0.86 CW 5 MFD 2.75 3.85 1/2”
02249 5KCP29DCA329S 1/8 1075 0.75 CCW 5 MFD 2.75 3.35 1/2”
A
C
Specifications:
• All models are single-speed
• 60 Hz
• 208-230 volts
• 1/2” shaft diameter
• 26” Leads
• Continuous duty, air-over
The largest selection of motors, components and accessories for the HVAC/R Industry
M-37