Page 1
1
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
NEDERLANDS
ENGLISH
CONNECT DA51
Connect DA51
Page 2
2
© MARMITEK
Page 3
3
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
NEDERLANDS
ENGLISH
1 Table of contents
1 Table of contents ................................................................ 3
2 Safety instructions .............................................................. 4
3 Your product ...................................................................... 5
3.1 Introduction ............................................................... 5
3.2 Features .................................................................... 5
3.3 Package contents ...................................................... 5
3.4 Product overview ....................................................... 6
4 Getting started ................................................................... 7
4.1 Connecting the product.............................................. 7
4.1.1 Connecting to the digital source (e.g. TV) .............. 7
4.1.2 Connecting to your audio amplifier ......................... 7
4.2 Power Supply ............................................................ 7
5 Connection diagram ........................................................... 8
6 Product details ................................................................... 8
6.1 Technical specifications ............................................. 8
7 Frequently asked questions (FAQs) ................................... 9
8 Notification ......................................................................... 9
8.1 Declaration of conformity ........................................... 9
8.2 Recycling ................................................................. 10
8.3 Copyrights ............................................................... 10
Connect DA51
Page 4
4
2 Safety instructions
Please read these instructions thoroughly before you use the
device and keep them for future reference.
Only for indoor use.
Do not use the product in a damp environment or near water.
Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
This product is not a toy. Keep out of reach of children.
Never connect an adapter or power cord when it is damaged.
In that case, contact your supplier.
Never open the product: the device may contain parts with
deadly voltage.
Repairs or service should only be performed by qualified
personnel.
Disconnect the AC/DC power adapter from the mains when
this device is not in use for a prolonged time.
Improper use, self-installed modifications or repairs will void
any and all warranties.
Marmitek does not accept any product responsibility for
incorrect use of the product or use other than for which the
product is intended.
Marmitek does not accept liability for any consequential
damage other than the legal product responsibility.
© MARMITEK
Page 5
5
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
NEDERLANDS
ENGLISH
3 Your product
3.1 Introduction
Congratulations on your purchase of the Marmitek Connect DA51.
This digital TV audio to stereo audio decoder enables you to send
digital audio from your TV to your analogue audio amplifier. Ideal if
your analogue audio amplifier has no digital audio inputs. The
Marmitek Connect DA51 is very easy to install.
3.2 Features
Digital TV Audio to Stereo Audio Decoder & Converter
Connect your new TV to the analogue input of your amplifier.
Convert digital audio signals from your TV (Toslink/coaxial)
to a left/right (analogue) audio signal.
Ideal if your audio amplifier has no digital audio inputs.
Decodes and converts both uncompressed digital stereo
signals (PCM) and multichannel audio signals (Dolby Digital
5.1 and DTS ES6.1).
Ready to use, no configuration required.
Very compact
3.3 Package contents
A. 1x Audio Decoder
B. 1x 5V/1A DC USB power adapter
C. 1 x Mini USB power cable
D. 1 x User Manual
Connect DA51
Page 6
6
3.4 Product overview
1. Toslink optical connector
2. Coax connector
3. Power connector
4. USB power connector
5. Optical/Coaxial input select switch
6. Headset connector
7. LED power indicator
8. Stereo line out
© MARMITEK
Page 7
7
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
NEDERLANDS
ENGLISH
4 Getting started
Please take the following steps before using the product:
Connect your TV (or other digital audio source; Blu-ray
player, game console, decoder/set-top box, etc.) to the
Connect DA51.
Select the desired audio input.
Connect your audio amplifier to the Connect DA51.
Power the Connect DA51.
We will now explain this step by step.
4.1 Connecting the product
4.1.1 Connecting to the digital source (e.g. TV)
Connect the Toslink/optical cable or coaxial cable of your TV (or
other source) to the Connect DA51's 'optical' (1) or 'coaxial' (2)
input.
Set the input select switch (5) to 'optical' or 'coaxial', depending on
the input selected above.
4.1.2 Connecting to your audio amplifier
Connect your analogue audio amplifier to the Connect DA51 via
the R/L output (8)
4.2 Power Supply
Connect the included power adapter (B) to the Connect DA51 (4)
via the micro USB cable (C). Plug the power adapter into the wall
outlet.
Connect DA51
Page 8
8
5 Connection diagram
6 Product details
6.1 Technical specifications
Power supply: 230VAC +10% -10% 50Hz, 5V
Audio input: 1 x Optical (Toslink), 1 x Digital
Audio output: 2 x RCA (L/R)
DAC: 192 kHz, 24 bit
Supported data rates: 2-channel LPCM, 32KHz,
DTS-ES6.1
Signal to noise ratio: ≥120db
Channel Separation Audio R/L: ≥85db
Frequency response: (20Hz ~ 20KHz) +/- 0.5db
Dimensions (H x W x D): 20x55x72 mm
Weight: 40 grams
1000mA switched mode power
adapter
Coaxial
uncompressed digital audio
1 x 3.5mm (Headphone).
44.1KHz, 48KHz, 96KHz sample
frequencies
Dolby Digital 5.1
© MARMITEK
Page 9
9
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
NEDERLANDS
ENGLISH
7 Frequently asked questions (FAQs)
There is no sound
Ensure that the power LED is lit and the input select switch is in
the correct position.
Do you have any other questions that have not been resolved by
the above information? Please go to www.marmitek.com
8 Notification
8.1 Declaration of conformity
Hereby, Marmitek BV, declares that this Connect DA51
is in compliance with the essential requirements and
Directive 2004/108/EC of the European Parliament and of the
Council of 15 December 2004 on the approximation of the laws of
the Member States relating to electromagnetic compatibility.
Directive 2006/95/EC of the European Parliament and of the
Council of 12 December 2006 on the harmonisation of the laws of
Member States relating to electrical equipment designed for use
within certain voltage limits. Directive 2011/65/EU of the European
Parliament and of the Council of 8 June 2011 on the restriction of
the use of certain hazardous substances in electrical and
electronic equipment. Commission Regulation (EC) No 278/2009
of 6 April 2009 implementing Directive 2005/32/EC of the
European Parliament and of the Council with regard to eco-design
requirements for no-load condition electric power consumption
and average active efficiency of external power supplies.
other relevant provisions of the following Directives:
Connect DA51
Page 10
10
8.2 Recycling
Environmental Information for Customers in the European
Union. European Directive 2002/96/EC requires that the
equipment bearing this symbol on the product and/or its
packaging must not be disposed of with unsorted municipal waste.
The symbol indicates that this product should be disposed of
separately from regular household waste streams. It is your
responsibility to dispose of this and other electric and electronic
equipment via designated collection facilities appointed by the
government or local authorities. Correct disposal and recycling will
help prevent potential negative consequences to the environment
and human health. For more detailed information about the
disposal of your old equipment, please contact your local
authorities, waste disposal service, or the shop where you
purchased the product.
8.3 Copyrights
Marmitek is a trademark of Pattitude B.V. Connect DA51™ is a
trademark of Marmitek B.V. All rights reserved. Every effort has
been made to ensure that the information in this manual is
accurate. Marmitek is not responsible for printing or clerical errors.
Copyright and all other proprietary rights in the content (including
but not limited to model numbers, software, audio, video, text and
photographs) rests with Marmitek B.V. Any use of the Content, but
without limitation, distribution, reproduction, modification, display
or transmission without the prior written consent of Marmitek is
strictly prohibited. All copyright and other proprietary notices shall
be retained on all reproductions. Other company and product
names mentioned herein may be trademarks of their respective
companies. Mention of third-party products is for informational
purposes only and constitutes neither an endorsement nor a
recommendation. Marmitek assumes no responsibility with regard
to the performance or use of these products.
Marmitek BV - P.O. Box 4257 - 5604 EG Eindhoven
The Netherlands
© MARMITEK
Loading...