xPlease read these instructions thoroughly before you use the
device and keep them for future reference.
x Only for indoor use.
x Do not use the product in a damp environment or near water.
x Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
x This product is not a toy. Keep out of reach of children.
x Do not open the product: the device may contain live parts.
x Keep batteries out of the reach of children. Dispose of
batteries as chemical waste. Never use old and new
batteries or different types of batteries together. Remove the
batteries when you are not using the system for a longer
period of time. Check the polarity (+/-) of the batteries when
inserting them in the product. Wrong positioning can cause
an explosion.
xConnect the adapter to the mains only after you have verified
that the line voltage corresponds to the value specified on
the type plates.
xNever connect a power adapter if it's damaged. In such
cases, please contact your supplier.
xRepairs or service should only be performed by qualified
personnel.
xDisconnect the AC/DC power adapter from the mains when
this device is not in use for prolonged time.
xImproper use, self-installed modifications or repairs will void
any and all warranties.
xMarmitek does not accept any product responsibility for
incorrect use of the product or use other than for which the
product is intended.
xMarmitek does not accept liability for any consequential
damage other than the legal product responsibility.
Congratulations on your purchase of the Marmitek Connect 620
UHD 2.0™!
It allows you to use 1 cable to connect 4 HDMI sources to your
TV, without any loss of signal or encryption. It's ideal when your
TV doesn't have enough HDMI inputs, or if you want to connect
the devices to your TV using just one cable. Examples of HDMI
sources are game consoles such as a PlayStation or Xbox, Bluray players, digital TV decoders and all other HDMI devices. The
Connect 620 UHD 2.0™ supports Ultra HD (4k), Full HD (1080p)
and all 3D formats, making it suitable for all your existing and
future equipment.
All our products are designed and manufactured to the highest
quality requirements. Please read this manual first and follow the
instructions in order to fully enjoy the possibilities of this product.
3.2 Benefits
xSuitable for simultaneously connecting 4 HDMI devices to
your TV
xEnjoy the latest Ultra HD content and watch Netflix or a Blu-
ray movie in 4K, while maintaining ultimate contrast and
beautiful colours.
xIncludes built-in repeater and equalizer for correcting any
signal loss.
x Switches automatically and/or with remote control.
x Supports HDCP 2.2 for playing protected 4K Ultra HD
content
3.3 HDMI properties
xThe maximum throughput speed is 18 Gbit/s (gigabits per
second). This allows HDMI 2.0 to display Ultra HD 4K
images at 60 fps (frames per second).
xSuitable for the latest Ultra HD 4K60 resolution (3840 x 2160
/ 60Hz), High Dynamic Range (HDR), Deep Color and 4:4:4
chroma colours.
Connect 620 UHD 2.0™
6
xSupports all 3D formats (suitable for use with your own 3D
Input indicators
A
Input
selection
Connector for DC power
adapter
HDMI inputs
IR sensor
equipment)
xDeep Color 36-bit (billions instead of millions of colours,
better reproduction of subtle differences in gradation and a
higher contrast ratio).
xSupports Dolby Atmos and DTS:X and all other common
audio formats.
3.4 Package contents
A. 1 x HDMI Switcher
B. 1 x Remote Control (battery included)
C. 1 x Power Adapter
D. 1 x User Manual
The Connect 620 UHD 2.0™ allows you to choose which HDMI
source is displayed on the TV. If you turn on one of the HDMI
sources, it will automatically switch to the correct input. If multiple
HDMI sources are turned on, the Connect 620 UHD 2.0™ will
automatically switch to the HDMI source that was activated last.
To deactivate or reactivate automatic switching, press the input
selection button on the remote control for 3 seconds. Input lights 3
and 4 will light up briefly to confirm. If you want to
manually select another HDMI
source, repeatedly press the
input selection button on the
remote control briefly until you
arrive at the right input, or use
the direct input selection
buttons (IN1 to IN4) to switch to
the required input directly. Alternatively, you can
use the "Select" button at the front of the
Connect 620 UHD 2.0™.
Note: Automatic switching must be supported by the HDMI
source. If it is not supported, you should manually select the
appropriate HDMI source.
Connect 620 UHD 2.0™
10
6 Technical specifications
Connections
HDMI input 4 x HDMI (19-pin female)
HDMI output 1 x HDMI (19-pin female)
HDMI cable length max. 15 metres
Video
Supported resolutions 4K
Supported PC resolutions max. QSXGA
HDMI standards HDMI 2.0b, HDR, CEC, EDID,
HDCP standards HDCP 2.2 and HDCP 1.4
Colour formats RGB and YCbCr 4:4:4, 4:2:0
If you experience poor or no picture after connecting the HDMI
switcher, please try to identify the problem by connecting the
devices to your screen (TV, monitor or projector) one by one. This
allows you to determine whether the problem is with the HDMI
sources, the HDMI cables, the HDMI switcher or the screen.
x Make sure the power adapter is connected and plugged in.
x For the best picture and sound quality, only use High Speed
HDMI® certified cables.
xDo not use HDMI cables longer than those specified in the
technical data.
x Check the HDMI cables and/or connectors for damage.
x Both the HDMI source and your screen should fully support
HDMI.
xCheck that your HDMI sources and screen support HDCP
2.2 (High Bandwidth Digital Content Protection) copy
protection.
Incorrect 3D display
xPlease check whether the HDMI source is set to display 3D
and/or it is set to automatic.
xBoth the HDMI source and your HD screen should support
the same 3D formats.
xPlease check that 3D is displayed correctly by connecting the
HDMI source directly to the HD display with an HDMI cable.
Do you have any other questions that have not been resolved by
the above information? Please go to www.marmitek.com
Hereby, Marmitek BV, declares that this Connect 620
UHD 2.0™ is in compliance with the essential
following Directives:
Directive 2004/108/EC of the European Parliament and of the
Council of 15 December 2004 on the approximation of the laws of
the Member States relating to electromagnetic compatibility
Directive 2006/95/EC of the European Parliament and of the
Council of 12 December 2006 on the harmonisation of the laws of
Member States relating to electrical equipment designed for use
within certain voltage limits
Directive 2011/65/EU of the European Parliament and of the
Council of 8 June 2011 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
Commission Regulation (EC) No 278/2009 of 6 April 2009
implementing Directive 2005/32/EC of the European Parliament
and of the Council with regard to ecodesign requirements for noload condition electric power consumption and average active
efficiency of external power supplies
8.2 Recycling
packaging must not be disposed of with unsorted municipal waste.
The symbol indicates that this product should be disposed of
separately from regular household waste streams. It is your
responsibility to dispose of this and other electric and electronic
equipment via designated collection facilities appointed by the
government or local authorities. Correct disposal and recycling will
help prevent potential negative consequences to the environment
and human health. For more detailed information about the
disposal of your old equipment, please contact your local
requirements and other relevant provisions of the
Environmental Information for Customers in the European
Union. European Directive 2002/96/EC requires that the
equipment bearing this symbol on the product and/or its
Connect 620 UHD 2.0™
14
authorities, waste disposal service, or the shop where you
purchased the product.
8.3 Copyrights
Marmitek is a trademark of Germatron B.V. Connect 620 UHD
2.0™ is a trademark of Marmitek B.V. All rights reserved. Every
effort has been made to ensure that the information in this manual
is accurate. Marmitek is not responsible for printing or clerical
errors. Copyright and all other proprietary rights in the content
(including but not limited to model numbers, software, audio,
video, text and photographs) rests with Marmitek B.V. Any use of
the Content, but without limitation, distribution, reproduction,
modification, display or transmission without the prior written
consent of Marmitek is strictly prohibited. All copyright and other
proprietary notices shall be retained on all reproductions. Other
company and product names mentioned herein may be
trademarks of their respective companies. Mention of third-party
products is for informational purposes only and constitutes neither
an endorsement nor a recommendation. Marmitek assumes no
responsibility with regard to the performance or use of these
products.
Lesen Sie diese Gebrauchsanleitung sorgfältig durch, bevor
Sie das Gerät in Betrieb nehmen und bewahren Sie diese
Anleitung bitte für eventuelle, spätere Bedarfsfälle auf.
x Ausschließlich für Verwendung in Innenräumen.
x Dieses Produkt nicht in einer feuchten Umgebung oder nahe
Wasserquellen verwenden.
xSetzen Sie dieses Produkt nicht extrem hohen oder
niedrigen Temperaturen, starken Lichtquellen und direkter
Sonneneinstrahlung aus.
xDieses Produkt ist kein Spielzeug. Außer Reichweite von
Kindern halten.
xDas Produkt niemals öffnen: Das Gerät kann Teile enthalten,
worauf lebensgefährliche Stromspannung steht.
xHalten Sie die Batterien außerhalb der Reichweite von
Kindern. Liefern Sie die Batterien als chemischen Kleinabfall
ein. Verwenden Sie niemals alte und neue oder
unterschiedliche Typen von Batterien durcheinander. Wenn
Sie das System längere Zeit nicht benutzen, entfernen Sie
die Batterien. Achten Sie beim Einlegen der Batterien auf die
Polarität (+ / -): Ein falsches Einlegen kann zu
Explosionsgefahr führen.
xSchließen Sie den Netzadapter erst dann an das Stromnetz
an, nachdem Sie überprüft haben, ob die Netzspannung mit
dem auf dem Typenschild angegeben Wert übereinstimmt.
x Schließen Sie niemals einen Netzadapter an, wenn diese
beschädigt sind. In diesem Fall nehmen Sie Kontakt mit
Ihrem Lieferanten auf.
x Überlassen Sie Reparaturen oder Wartung nur Fachleuten.
x Entfernen Sie den AC/DC Speisungsadapter aus der
Steckdose, wenn Sie das Gerät längere Zeit nicht nutzen.
xBei einer zweckwidrigen Verwendung, selbst angebrachten
Veränderungen oder selbst ausgeführten Reparaturen
verfallen alle Garantiebestimmungen.
xMarmitek übernimmt bei einer falschen Verwendung des
Produkts oder bei einer anderen Verwendung des Produktes
als für den vorgesehenen Zweck keinerlei Produkthaftung.
xMarmitek übernimmt für Folgeschäden keine andere Haftung
als die gesetzliche Produkthaftung.
3 Ihr Produkt
3.1 Einführung
Herzlichen Glückwunsch zum Erwerb Ihres Marmitek Connect 620
UHD 2.0™!
Sie können 4 HDMI Quellen mit 1. Kabel an Ihren Fernseher
anschließen, ohne jeglichen Signal- oder Verschlüsselungsverlust.
Ideal, wenn Ihr Fernseher zu wenig HDMI Eingänge hat oder
wenn Sie die Geräte mit nur 1. Kabel an Ihren Fernseher
anschließen möchten. Beispiele von HDMI Quellen sind:
Spielcomputer wie PlayStation und XBox, Blu-Ray-Player,
digitaler TV Decoder und alle anderen HDMI Geräte. Der Connect
620 UHD 2.0™ unterstützt Ultra HD (4k), Full HD (1080p) und alle
3D Formate und ist somit für alle heutigen und zukünftigen Geräte
geeignet.
Alle von Marmitek entwickelten und hergestellten Produkte
entsprechen den höchsten Qualitätsanforderungen. Lesen Sie
diese Anleitung bitte sorgfältig durch und befolgen Sie die
Anweisungen, um die Möglichkeiten dieses Produkts optimal
nutzen zu können.
3.2 Verwendbarkeit
xGeeignet, um 4 HDMI Quellen zugleich an Ihren Fernseher
anzuschließen.
xProfitieren Sie von den neuesten Ultra HD Inhalten und
sehen Sie Netflix oder Blu-Ray Filme in 4K ohne jeglichen
Kontrastverlust und in wunderbaren Farben.
xMit eingebautem Repeater und Equalizer zum Korrigieren
eines eventuellen Signalverlustes.
xSchaltet automatisch und/oder mit Fernbedienung.
Connect 620 UHD 2.0™
18
xUnterstützt HDCP 2.2 zum Abspielen von gesichertem 4K
Ultra-HD Inhalt.
3.3 HDMI eigenschaften
xDer maximale Datendurchsatz beträgt 18 Gbit/s (Gigabit pro
Sekunde). Somit kann HDMI 2.0, Ultra HD 4k Aufnahmen in
60 BpS (Bilder pro Sekunde) wiedergeben Unterstützt alle
3D Formate (geeignet für Verwendung mit Ihren eigenen 3D
Geräten).
xGeeignet für die neueste Ultra HD 4K60 Auflösung (3840 x
2160 / 60 Hz), High Dynamic Range (HDR), Deep Color und
4:4:4 Chroma Farben.
xDeep Color 36-Bit (Milliarden anstatt Millionen Farben,
bessere Wiedergabe von subtilen Farbwerten und höheres
Kontrastverhältnis).
xUnterstützt Dolby Atmos und DTS:X und alle übrigen,
xSchalten Sie alle Geräte (Fernseher und HDMI Quellen)
bevor Sie diese an den Connect 620 UHD 2.0™ anschließen
zunächst aus. Entfernen Sie den Stecker aus der
Steckdose, falls diese nicht ausgeschaltet werden können.
xVerwenden Sie zum Erhalt einer optimalen Bild- und
Tonqualität ausschließlich High Speed HDMI® zertifizierte
Kabel. Verwenden Sie wenig Kraft, um die HDMI Kabel
anzuschließen oder loszukoppeln; diese könnten sonst
beschädigen.
xLassen Sie während des Anschließens Ihrer HDMI Kabel
Vorsicht walten. Diese können schnell beschädigen.
4.2 Installation
1. Schließen Sie die HDMI Quellen (wie Spielkonsole, Blu-Ray
Player oder digitaler TV Decoder) mit einem HDMI Kabel an
die HDMI Anschlüsse mit der Bezeichnung “Input“ an.
2. Schließen Sie den TV mit einem HDMI Kabel an den HDMI
Anschluss mit der Bezeichnung “Output” an.
3. Schließen Sie den Speisungsadapter an den “DC 5V“ an und
verbinden Sie diesen mit der Steckdose.
4. Ziehen Sie den Plastikstreifen aus dem Batteriefach der
Fernbedienung, um die Batterie zu aktivieren und entfernen
Sie die Schutzfolie an der Oberseite.
Connect 620 UHD 2.0™
22
5 Von Hand oder automatisch schalten
Sofort-Input
Auswahl
Input Auswahl
Mit dem Connect 620 UHD 2.0™ wählen Sie, welche HDMI
Quelle auf dem Fernseher wiedergegeben wird. Wenn Sie eine
der HDMI Quellen einschalten, wird diese automatisch zum
richtigen Eingang schalten. Sind mehrere HDMI Quellen
eingeschaltet, so wird der Connect 620 UHD 2.0™ automatisch
zur letztmals aktiv gewesenen HDMI Quelle schalten.
Zur Deaktivierung des automatischen Schaltens halten Sie die
Input Auswahltaste auf der Fernbedienung 3 Sekunden lang fest.
Ihre Wahl wird durch kurzes Aufleuchten der
Inputleuchte 3 und 4 bestätigt.
Möchten Sie von Hand eine
andere HDMI Quelle
auswählen, dann drücken Sie
die Input Auswahltaste an der
Fernbedienung stets kurz, bis
Sie die entsprechende Input Auswahl gefunden
haben oder Sie nutzen die Sofort- Input
Auswahltasten (IN1 bis IN4), um gleich zum
gewünschten Input zu schalten. Sie können dazu
auch die “Select” Taste an der Vorderseite des
Connect 620 UHD 2.0™ verwenden.
Bemerkung: Automatisches Schalten muss durch die HDMI
Quelle unterstützt werden. Wird dieses nicht unterstützt, müssen
Sie selbst die entsprechende HDMI Quelle selektieren.
Maßangaben (H x B x T) 120 x 78 x 17 mm
Gewicht 210 g
Buchsenkontakt)
Buchsenkontakt)
(4096x2160)@24/30/50/60Hz,
480i~1080p@50/60Hz,
1080p@120Hz und
3D@1080p/60Hz.
(2560x2048@60Hz).
DVI, alle 3D Formate und
Deep Color 36-bit.
of 4:2:2.
TrueHD,
Digital/ AC3,
Connect 620 UHD 2.0™
24
Umgebung
Umgebungstemperatur +0 to +40° C
Relative Feuchte 20% bis 90%
Speisung
Externer Speisungsadapter 100-240VAC @50-60Hz,
Angaben können ohne vorherige Mitteilung geändert werden.
5VDC @ 1A
7 Häufig gestellte Fragen (FAQs)
Kein (oder schlechtes) Bild und Ton
Wenn Sie nach dem Anschließen des HDMI Switch kein, oder ein
schlechtes Bild empfangen, versuchen Sie dann die Geräte Stück
für Stück an Ihren Schirm anzuschließen (TV, Monitor oder
Projektor), um zu sehen, wo das Problem liegt. Auf diese Art
können Sie ermitteln ob es an den HDMI Quellen, den HDMI
Kabeln, dem HDMI Switch oder dem Schirm liegt.
xÜberprüfen Sie, ob der Speisungsadaptor angeschlossen ist
und sich in der Steckdose befindet.
xVerwenden Sie zum Erhalt einer optimalen Bild- und
Tonqualität ausschließlich High Speed HDMI® zertifizierte
Kabel.
xVerwenden Sie keine HDMI Kabel, die länger sind als in den
technischen Daten aufgeführt.
xÜberprüfen Sie die HDMI Kabel und/oder Anschlüsse auf
Beschädigungen.
xSowohl die HDMI Quelle wie Ihr Bildschirm muss HDMI
vollständig unterstützen.
xPrüfen Sie, ob Ihre HDMI Quellen und Bildschirm das
Verschlüsselungssystem HDCP 2.2 (Highbandwidth Digital
Content Protection) unterstützen.
Keine korrekte 3D Wiedergabe
xÜberprüfen Sie, ob die HDMI Quelle auf 3D Wiedergabe
eingestellt und/oder ob diese auf automatisch eingestellt ist.
xSowohl die HDMI Quelle wie Ihr HD Bildschirm müssen
dieselben 3D Daten unterstützen.
xÜberprüfen Sie, ob 3D korrekt wiedergegeben wird, indem
Sie die HDMI Quelle mit einem HDMI Kabel direkt an den HD
Bildschirm anschließen.
Sie haben noch Fragen, die im Obigen nicht beantwortet wurden?
Schauen Sie dann auf www.marmitek.com
8 Hinweis
8.1 Konformitätserklärung
Hiermit erklärt Marmitek BV die Übereinstimmung des Gerätes
Connect 620 UHD 2.0™ mit den grundlegenden Anforderungen
Richtlinie 2004/108/EG des Europäischen Parlaments und den
Bestimmungen vom 15. Dezember 2004 zur Angleichung der
Rechtsvorschriften der Mitgliedstaaten über die elektromagnetische
Verträglichkeit
Richtlinie 2006/95/EG des Europäischen Parlaments und den
Bestimmungen vom 12. Dezember 2006 zur Angleichung der
Rechtsvorschriften der Mitgliedstaaten betreffend elektrische Betriebsmittel
zur Verwendung innerhalb bestimmter Spannungsgrenzen
Richtlinie 2011/65/EU des Europäischen Parlaments und des Rates vom 8.
Juni 2011 zur Beschränkung der Verwendung bestimmter gefährlicher
Stoffe in Elektro- und Elektronikgeräten
Verordnung (EG) Nr. 278/2009 der Kommission vom 6. April 2009 zur
Durchführung der Richtlinie 2005/32/EG des Europäischen Parlaments und
den Bestimmungen im Hinblick auf die Festlegung von ÖkodesignAnforderungen an die Leistungsaufnahme externer Netzteile bei Nulllast
sowie ihre durchschnittliche Effizienz im Betrieb
und den anderen relevanten Festlegungen der Richtlinien:
Connect 620 UHD 2.0™
26
8.2 Recycling
Umweltinformation für Kunden innerhalb der Europäischen Union.
Die Europäische Richtlinie 2002/96/EC verlangt, dass technische
Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit
diesem Symbol versehen ist nicht zusammen mit unsortiertem
Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass
das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte.
Es liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische und
elektronische Geräte über die dafür zuständigen und von der Regierung
oder örtlichen Behörden dazu bestimmten Sammelstellen zu entsorgen.
Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, potentielle
negative Folgen für Umwelt und die menschliche Gesundheit zu vermeiden.
Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgeräte benötigen,
wenden Sie sich bitte an die örtlichen Behörden oder städtischen
Entsorgungsdienste oder an den Händler, bei dem Sie das Produkt
erworben haben.
8.3 Urheberrechte
Marmitek BV ist ein Warenzeichen von Germatron BV. Connect 620 UHD 2.0™
ist ein Warenzeichen von Marmitek BV Alle Rechte vorbehalten. Weitergehende
Ansprüche sind ausgeschlossen, insbesondere übernimmt Marmitek BV keine
Gewähr für die Richtigkeit des Inhalts dieses Handbuchs. Urheber- und andere
Eigentumsrechte am Inhalt (einschließlich aber nicht beschränkt auf,
Modellnummern, Software, Audio, Video, Text und Fotos begrenzt) liegt bei
Marmitek BV. Jegliche Nutzung von Inhalten, aber ohne Begrenzung, Verteilung,
Vervielfältigung, Änderung, Anzeige oder Übermittlung ohne die vorherige
schriftliche Erlaubnis von Marmitek ist strengstens untersagt. Alle Urheber- und
andere Eigentumsrechte muss auf allen Reproduktionen beibehalten werden.
Die Rechte an anderen in diesem Handbuch erwähnten Marken und
Produktnamen können bei ihren Inhabern liegen und werden hiermit anerkannt.
Die Nennung von Produkten, die nicht von Marmitek sind, dient ausschließlich
Informationszwecken und stellt keine Werbung dar. Marmitek übernimmt
hinsichtlich der Auswahl, Leistung oder Verwendbarkeit dieser Produkte keine
Gewähr.
Veuillez lire attentivement ce manuel d’utilisation avant
d’utiliser l’appareil et conservez-le pour consultation
ultérieure si nécessaire.
x Ne peut être utilisé qu’à l’intérieur.
x N'utilisez pas le produit dans un environnement humide ou à
proximité de l’eau.
xN’exposez pas le produit à des températures extrêmement
élevées ou basses, à des sources de lumière trop fortes ou
à la lumière directe du soleil.
xCe produit n'est pas un jouet. Tenir hors de portée des
enfants.
xNe jamais ouvrir le produit : L'appareil peut contenir des
éléments qui sont sous tension très dangereux.
xTenir les piles hors de portée des enfants. Traiter les piles
usagées comme des petits déchets chimiques. Ne jamais
utiliser simultanément des vieilles piles et des piles neuves,
ou des piles de types différents. Enlever les piles lorsque le
système sera mis longtemps hors de service. Respecter la
polarité en insérant les piles (+/-) : une insertion incorrecte
peut engendrer un danger d’explosion.
xBrancher l’adaptateur secteur sur le réseau électrique
seulement après avoir vérifié que la tension d’alimentation
correspond à la valeur indiquée sur les plaques
d’identification.
xNe jamais brancher un adaptateur secteur lorsque celui-ci
est endommagé. Dans ce cas, veuillez contacter votre
fournisseur.
xConfier les réparations et l'entretien exclusivement à un
personnel qualifié.
xDébranchez l'adaptateur AC/DC de la prise de courant
lorsque celui-ci n'est pas utilisé pendant une longue période.
xLa garantie n'est plus valable en cas d'usage inapproprié, de
modifications ou de réparations effectuées par des
personnes non agréées.
xMarmitek se dégage de toute responsabilité en cas d'usage
inapproprié du produit ou d'utilisation non conforme à l'usage
auquel le produit est destiné.
xMarmitek se dégage de toute responsabilité en cas de
dommage conséquent, autre que la responsabilité civile du
fait des produits.
3 Votre produit
3.1 Introduction
Félicitations pour l'achat du Marmitek Connect 620 UHD 2.0™!
Vous pouvez connecter 4 sources HDMI à votre téléviseur sans
aucune perte de signal ou de cryptage avec un seul câble. Idéal si
votre téléviseur n'a pas suffisamment d'entrées HDMI ou si vous
souhaitez connecter les appareils à votre téléviseur avec un seul
câble. Exemples de sources HDMI: consoles de jeux telles que
PlayStation et Xbox, lecteur Blu-ray, Décodeur TV Numérique et
tous les autres appareils HDMI. Le Connect 620 UHD 2.0™ est
compatible avec Ultra HD (4k), Full HD (1080p) et tous les formats
3D et convient de ce fait pour tous vos appareils existants et
futurs. Tous nos produits sont conçus et fabriqués selon les
exigences de qualité les plus élevées. Veuillez lire au préalable ce
manuel d'utilisation et suivez les instructions afin que vous
puissiez profiter de façon optimale des possibilités de ce produit.
3.2 Avantages
xConvient pour connecter simultanément 4 périphériques
HDMI à votre téléviseur
xProfitez du contenu Ultra HD le plus récent et regardez
Netflix ou un film Blu-ray en 4K tout en conservant un
contraste ultime et des couleurs exceptionnelles.
xAvec répéteur et égaliseur intégrés pour corriger une perte
de signal éventuelle
x Commutation automatiquement et/ou avec télécommande.
x Supporte HDCP 2.2 pour la lecture de contenus 4K Ultra HD
dont la copie est protégée.
Connect 620 UHD 2.0™
30
3.3 Caractéristiques HDMI
Voyants d’entrée
A
Sélecteur d’entrée
Capteur IR
xLe débit maximal est de 18 Gbit/s (gigabit par seconde).
L’HDMI 2.0, peut ainsi afficher des images Ultra HD 4k en 60
fps (images par seconde).Supporte tous les formats 3D
(convient pour une utilisation avec vos propres appareils 3D).
xConvient pour la résolution Ultra HD 4K60 la plus récente
(3840 x 2160 / 60 Hz), pour High Dynamic Range (HDR),
pour Deep Color et pour des couleurs chrome 4:4:4.
xDeep Color 36-bit (Profondeur intense des Couleurs 36-bit,
des milliards de couleurs au lieu de millions de couleurs,
meilleure restitution des différences subtiles dans la
gradation et un rapport de contraste plus élevé)
xSupporte Dolby Atmos et DTS:X et tous les autres formats
audio courants.
3.4 Contenu de l’emballage
A. 1 x Commutateur HDMI
B. 1 x Télécommande (avec pile incluse)
C. 1 x Adaptateur secteur
D. 1 x Manuel d'utilisation
xEteignez tous les appareils (téléviseur et sources HDMI)
avant de les connecter au Connect 620 UHD 2.0™. S'il n'est
pas possible de les éteindre, débranchez la prise de courant.
xUtilisez uniquement des câbles certifiés HDMI® High Speed
pour obtenir la meilleure qualité d'image et de son. Ne forcez
pas pour connecter ou déconnecter les câbles HDMI,
autrement cela pourrait les endommager.
xSoyez prudent lorsque vous connectez les câbles HDMI. Ils
peuvent être facilement endommagés.
4.2 Installation
1. Connectez les sources HDMI (telles que console de jeux,
lecteur Blu-ray ou décodeur TV numérique) avec un câble
HDMI sur les ports HDMI avec l'inscription “Input”.
2. Connectez le téléviseur avec un câble HDMI sur le port
HDMI avec l'inscription “Output”.
3. Connectez l'adaptateur secteur sur “DC 5V” et branchez la
fiche dans la prise de courant.
4. Retirez la languette de plastique du compartiment à pile de la
télécommande afin d'activer la pile et enlevez le film
protecteur de la partie supérieure.
Le Connect 620 UHD 2.0™ vous permet de choisir quelle source
HDMI sera affichée sur le téléviseur. Lorsque vous branchez
l’une des sources HDMI celle-ci se connectera automatiquement
sur l’entrée correcte. Si plusieurs sources HDMI sont branchées le
Connect 620 UHD 2.0™ se connectera automatiquement sur la
dernière source HDMI active.
Pour désactiver ou réactiver la commutation automatique,
appuyez pendant 3 secondes sur le bouton de sélection d’entrée
de la télécommande. Les voyants d’entrée 3 et 4
s'allument brièvement
pour confirmer. Si vous
souhaitez sélectionner
manuellement une autre
source HDMI, appuyez
alors brièvement sur le
bouton de sélection
d'entrée de la télécommande jusqu'à ce que vous
ayez atteint l'entrée correcte ou utilisez les
boutons de sélection d’entrée directe (IN1 à IN4)
pour passer directement à l'entrée souhaitée. A
cet effet vous pouvez également utiliser le bouton “Select” sur la face avant du Connect 620 UHD 2.0™.
Remarque : la commutation automatique doit être supportée par
la source HDMI. Si celle-ci n’est pas supportée, vous devez
sélectionner vous-même la bonne source HDMI.
Connect 620 UHD 2.0™
34
6 Spécifications techniques
Connexions :
Entrée HDMI 4 x HDMI (19 broches
Sortie HDMI 1 x HDMI (19 broches
Longueur du câble HDMI 15 mètres maximum
Vidéo
Résolutions prises en charge 4K
Résolutions PC prises en charge max. QSXGA
Standards HDMI HDMI 2.0b, HDR, CEC, EDID,
Standards HDCP HDCP 2.2 et HDCP 1.4
Formats de couleur RVB et YCbCr 4:4:4, 4:2:0 ou
Les spécifications sont sujettes à modification sans préavis.
Connect 620 UHD 2.0™
36
7 Foire aux questions (FAQ)
Pas d'image (ou image de mauvaise qualité) ni de son
Si après avoir connecté le commutateur HDMI vous n'avez pas
d'image ou l'image est de mauvaise qualité, essayez de trouver la
cause du problème en connectant les appareils l'un après l'autre à
votre écran (téléviseur, moniteur ou projecteur). Vous pourrez
ainsi déterminer si le problème provient des sources HDMI, des
câbles HDMI, du commutateur HDMI ou de l'écran.
xAssurez-vous que l'adaptateur secteur soit connecté et
branché dans la prise de courant.
xUtilisez uniquement des câbles certifiés HDMI® High Speed
pour obtenir la meilleure qualité d'image et de son.
xN'utilisez pas de câbles HDMI qui soient plus longs que ce
qui est spécifié dans les caractéristiques techniques.
xAssurez-vous que les câbles HDMI et/ou connecteurs ne
soient pas endommagés.
xLa source HDMI ainsi que l'écran doivent supporter
pleinement le HDMI.
xAssurez-vous que vos sources HDMI et votre écran
supportent la protection contre la copie HDCP 2.2
(Highbandwidth Digital Content Protection).
Pas d'affichage 3D correctxAssurez-vous que la source HDMI soit paramétrée pour
restituer les images 3D et/ou qu'elle soit en mode
automatique.
xVotre source HDMI ainsi que votre écran HD doivent
supporter les mêmes formats 3D.
xAssurez-vous que l'image 3D soit restituée correctement en
connectant la source HDMI directement à l'écran HD avec un
câble HDMI.
Les informations ci-dessus n'ont pas répondu à vos
questions ?
Veuillez consulter le site internet www.marmitek.com
Par la présente Marmitek BV déclare que l'appareil
Connect 620 UHD 2.0™ est conforme aux exigences
directives:
Directive 2004/108/CE du Parlement Européen et du Conseil du
15 décembre 2004 relative au rapprochement des législations des
États membres concernant la compatibilité électromagnétique
Directive 2006/95/CE du Parlement européen et du Conseil du 12
décembre 2006 concernant le rapprochement des législations des
États membres relatives au matériel électrique destiné à être
employé dans certaines limites de tension
Directive 2011/65/UE du Parlement Européen et du Conseil du 8
juin 2011 relative à la limitation de l’utilisation de certaines
substances dangereuses dans les équipements électriques et
électroniques
Règlement (CE) no 278/2009 de la Commission du 6 avril 2009
portant application de la directive 2005/32/CE du Parlement
européen et du Conseil en ce qui concerne les exigences
d’écoconception relatives à la consommation d’électricité hors
charge et au rendement moyen en mode actif des sources
d’alimentation externes
8.2 Recyclage
l’équipement sur lequel est apposé ce symbole sur le produit et/ou
son emballage ne soit pas jeté avec les autres ordures
ménagères. Ce symbole indique que le produit doit être éliminé
dans un circuit distinct de celui pour les déchets des ménages. Il
est de votre responsabilité de jeter ce matériel ainsi que tout autre
matériel électrique ou électronique par les moyens de collecte
indiqués par le gouvernement et les pouvoirs publics des
collectivités territoriales. L’élimination et le recyclage en bonne et
essentielles et aux autres dispositions pertinentes des
Informations environnementales pour les clients de l’Union
européenne
La directive européenne 2002/96/CE exige que
Connect 620 UHD 2.0™
38
due forme ont pour but de lutter contre l’impact néfaste potentiel
de ce type de produits sur l’environnement et la santé publique.
Pour plus d’informations sur le mode d’élimination de votre ancien
équipement, veuillez prendre contact avec les pouvoirs publics
locaux, le service de traitement des déchets, ou l’endroit où vous
avez acheté le produit.
8.3 Droits d'auteur
Marmitek est une marque déposée de Germatron BV. Connect
620 UHD 2.0™ est une marque déposée de Marmitek BV. Tous
droits réservés. Tout a été mis en œuvre pour que les
informations présentées dans ce manuel soient exactes. Marmitek
n’est pas responsable des erreurs de reproduction ou
d’impression. Les droits d'auteur et tout autres droits de propriété
concernant le contenu (comprenant mais pas limités aux numéros
de modèle, logiciels, audio, vidéo, textes et photos) appartiennent
à Marmitek B.V. Toute utilisation du contenu, mais sans
restriction, concernant la distribution, la reproduction, toute
modification, la publication ou la diffusion est strictement interdite
sans l'autorisation préalable par écrit de Marmitek. Tous les droits
d'auteur et autres droits de propriété doivent être respectés pour
toutes reproductions. Les autres noms de produits et de sociétés
peuvent être des marques de leurs détenteurs respectifs. Les
produits commercialisés par des entreprises tierces ne sont
mentionnés que pour information, sans aucune intention de
préconisation ni de recommandation. Marmitek décline toute
responsabilité quant à l’utilisation et au fonctionnement de ces
produits.
Marmitek BV - Boîte postale 4257 - 5604 EG Eindhoven
8.3 Derechos de propiedad intelectual ......................................... 50
Connect 620 UHD 2.0™
40
2 Instrucciones de seguridad
Lee este modo de empleo atentamente antes de usar el
dispositivo y guárdalo para consultarlo si necesario.
x Exclusivamente para el uso en sitios interiores.
x No use el producto en un ambiente húmedo o en la cercanía
de agua.
xNo exponga el producto a temperaturas extremamente altas
o bajas, fuentes de luz muy potentes o luz solar directa.
xEste producto no es un juguete. Asegúrese de que está
fuera del alcance de los niños.
xNunca abra el producto: Puede contener piezas que se
encuentren bajo una tensión mortal.
xTen cuidado que las pilas se encuentran fuera del alcance
de niños. Entrega las pilas como residuos químicos. Nunca
use pilas nuevas y viejas o pilas de tipos distintos a la vez.
Quita las pilas si no usa el sistema durante mucho tiempo.
Cuando pone las pilas, presta atención a la polaridad (+ / -):
si no son puestas de manera justa, puede causar peligro de
explosión.
xNo conecte el adaptador de red a la red de alumbrado antes
de que haya controlado si la tensión de red corresponde con
el valor indicado en la estampa de tipo.
xNunca conecte un adaptador de si ése está dañado. En este
caso, por favor entre en contacto con su proveedor.
x Deja las reparaciones o servicios a personal experto.
x Quite el adaptador de corriente AC/DC de la toma si no usa
el dispositivo durante mucho tiempo.
xEn caso de uso indebido o modificaciones y reparaciones
montados por su mismo, la garantía se caducará.
xEn caso de uso indebido o inapropiado, Marmitek no acepta
ninguna responsabilidad de producto.
xMarmitek no acepta la responsabilidad para daños
consecuenciales que difieren de la responsabilidad de
producto legal.
¡Felicidades por la compra del Marmitek Connect 620 UHD 2.0™!
Conectar hasta 4 fuentes HDMI con el televisor usando solo un
cable. Sin pérdida de calidad o de encriptación. La solución
perfecta cuando el televisor dispone de pocas entradas HDMI o
para conectar varios dispositivos con el televisor usando solo un
cable. Fuentes HDMI son entre otros: videoconsolas como
Playstation y Xbox, reproductores Blu-Ray, decodificadores
digitales de TV y todos los demás dispositivos HDMI. El
Connect 620 UHD 2.0™ es compatible con Ultra HD (4k), Full HD
(1080p) y cada formato de 3D y es apto para cada dispositivo
actual y futuro.
Todos nuestros productos se desarrollan y fabrican según las
más altas exigencias de calidad. Por favor lea este manual y
sigua las instrucciones para disfrutar de todas las posibilidades
que ofrece este producto.
3.2 Ventajas
xApto para conectar 4 dispositivos HDMI con el televisor a la
vez.
xDisfrutar del contenido Ultra HD más reciente y ver Netflix o
películas en 4K con Bluray, reproducidas en 2 tvs o
proyectores a la vez sin pérdida de contraste y en colores
maravillosas.
xCon repetidor y equalizador incorporados para corregir una
posible pérdida de señal.
x Conmuta automáticamente y/o con mando a distancia.
x Soporta HDCP 2.2 para la reproducción de contenido 4K
Ultra HD protegido.
Connect 620 UHD 2.0™
42
3.3 Características HDMI
Indicadores de
input
Selección de
input
Sensor IR
A
xVelocidad de procedimiento máxima de 18 Gbit/s (gigabit por
segundo), puede reproducir imágenes HDMI 2.0, Ultra HD
4K en 60 fps (fotogramas por segundo).Soporta cada
formato de 3D (apto para el empleo con su propio dispositivo
de 3D)
xDeep Color 36-bit, (millares de colores en vez de millones,
mejor reproducción de diferencias sútiles de graduación y
ratio de contraste más alto)
xSoporta Dolby Atmos, DTS:X y todos los demás formatos de
audio convencionales.
3.4 Contenido del embalaje
A. 1 x Selector HDMI
B. 1 x Mando a distancia (pila incluida)
C. 1 x Adaptador de alimentación
D. 1 x Modo de empleo
El Connect 620 UHD 2.0™ le ofrece la posibilidad de elegir la
fuente HDMI cuyo contenido quiere reproducir. Cuando se
enciende una de las fuentes, el dispositivo cambia
automáticamente a la entrada correspondiente. Cuando están
encendidas varias fuentes a la vez, el Connect 620 UHD 2.0™
cambia automáticamente a la fuente HDMI que fue activada más
recientemente.
Para desactivar o activar la opción de conmutar automáticamente,
mantenga pulsado el botón de selección de input en el mando a
distancia durante 3 segundos. Las lamparas de
Input 3 y 4 resplandecen
brevemente para confirmar la
acción. Si desea seleccionar
manualmente otra fuente
HDMI, pulsa el botón de input
en el mando a distancia
brevemente hasta que llegue al
input deseado o usa los botones de selección
directa de input (IN1 hasta IN4). También puede
usar el botón “Select” en la frente del Connect 620
UHD 2.0™.
Nota: es necesario que la fuente HDMI soporte la conmutación
automática. Si no es el caso, tiene que seleccionar la fuente
HDMI manualmente.
Connect 620 UHD 2.0™
46
6 Especificaciones técnicas
Conexiones
Entrada HDMI 4 x HDMI (19-pin hembra)
Salida HDM 1 x HDMI (19-pin hembra)
Longitud de cable HDMI 15 m como máximo
Video
Resoluciones soportadas 4K
Resoluciones PC soportadas QSXGA (2560x2048@60Hz)
Estándares HDMI HDMI 2.0b, HDR, CEC, EDID,
Estándares HDCP HDCP 2.2 y HDCP 1.4
Formatos de colores RGB y YCbCr 4:4:4, 4:2:0 o
Profundidad de color 36-bit max.
Velocidad de procedimiento 18 Gbit/s max.
Frecuencia de reloj 600 MHz max.
Audio
Formatos de audio HDMI DTS-HD Master Audio, Dolby
Dolby Atmos, DTS:X, Dolby
DTS 5.1 y PCM estéreo.
Carcasa
Dimensiones (A x A x P) 120 x 78 x 17 mm
Peso 210 g
Ambiente
Temperatura ambiental +0 hasta +40° C
(4096x2160)@24/30/50/60Hz,
480i~1080p@50/60Hz,
1080p@120Hz y
3D@1080p/60Hz
Adaptador de alimentación
externo 100-240 VAC @50-60 Hz,
Las especificaciones pueden cambiar sin previo aviso.
5 VDC @ 1 A
Connect 620 UHD 2.0™
48
7 Preguntas frecuentes (FAQs)
No hay imagen y sonido o son de calidad inferior
Cuando no hay imagen después de haber conectado el
Conmutador HDMI o cuando la imagen es de calidad inferior,
intenta encontrar la causa conectando cada dispositivo
individualmente con la pantalla (TV, monitor o proyectór). De esta
manera se detecta si el problema es causado por las fuentes
HDMI, los cables HDMI, el conmutador HDMI o la pantalla.
x Controla si el adaptador de alimentación está enchufado.
x Emplea exclusivamente cables certificados de High Speed
HDMI® para una calidad superior de imagen y sonido.
xNo emplea cables HDMI más largos que indicado en las
especificaciones de los datos técnicos.
xControla si ninguno de los cables y/o conectores está
dañado.
xEs necesario que tanto la fuente HDMI como las pantallas
son compatibles con el HDMI.
xControla si las fuentes HDMI y las pantallas son copatibles
con la seguridad contra la copia de contenidos HDCP 2.2
(Highbandwidth Digital Content Protection).
El 3D no se reproduce correctamente
xControla si la fuente HDMI está puesto en modo de
reproducir el 3D y/o si está puesto en modo automático.
xTanto la fuente HDMI como la pantalla HD tienen que ser
compatibles con los mismos formatos de 3D.
xControla si la fuente HDMI reproduce el 3D correctamente.
Por este objetivo, conéctala con la pantalla a traves de un
cable HDMI.
Marmitek BV declara que este Connect 620 UHD 2.0™
cumple con las exigencias esenciales y con las demás
Directiva 2004/108/CE del Parlamento Europeo y del Consejo de
15 de diciembre de 2004 relativa a la aproximación de las
legislaciones de los Estados miembros en materia de
compatibilidad electromagnética
Directiva 2006/95/CE del Parlamento Europeo y del Consejo de
12 de diciembre de 2006 relativa a la aproximación de las
legislaciones de los Estados miembros sobre el material eléctrico
destinado a utilizarse con determinados límites de tensión
Directiva 2011/65/UE del Parlamento Europeo y del Consejo de 8
de junio de 2011 sobre restricciones a la utilización de
determinadas sustancias peligrosas en aparatos eléctricos y
electrónicos
Reglamento (CE) no 278/2009 de la Comisión de 6 de abril de
2009 por el que se desarrolla la Directiva 2005/32/CE del
Parlamento Europeo y del Consejo en lo concerniente a los
requisitos de diseño ecológico aplicables a la eficiencia media en
activo de las fuentes de alimentación externas y a su consumo de
energía eléctrica durante el funcionamiento en vacío
8.2 Reciclaje
su embalaje no deben eliminarse junto con otros residuos
urbanos no seleccionados. El símbolo indica que el producto en
cuestión debe separarse de los residuos domésticos
convencionales con vistas a su eliminación. Es responsabilidad
suya desechar este y cualesquiera otros aparatos eléctricos y
electrónicos a través de los puntos de recogida que ponen a su
disposición el gobierno y las autoridades locales. Al desechar y
reglas relevantes de la directriz:
Información medioambiental para clientes de la Unión
Europea. La Directiva 2002/96/CE de la UE exige que los
equipos que lleven este símbolo en el propio aparato y/o en
Connect 620 UHD 2.0™
50
reciclar correctamente estos aparatos estará contribuyendo a
evitar posibles consecuencias negativas para el medio ambiente y
la salud de las personas. Si desea obtener información más
detallada sobre la eliminación segura de su aparato usado,
consulte a las autoridades locales, al servicio de recogida y
eliminación de residuos de su zona o pregunte en la tienda donde
adquirió el producto.
8.3 Derechos de propiedad intelectual
Marmitek es una marca registrada de Germatron BV. Connect
620 UHD 2.0™ es una marca registrada de Marmitek BV. Todos
los derechos reservados. En la realización de este manual se ha
puesto el máximo cuidado para asegurar la exactitud de la
información que en él aparece. Marmitek no se responsabiliza de
los posibles errores de impresión o copia. Propiedades
intelectuales y todos los demás derechos de propiedad al
contenido (incluso pero no limitado a números de modelos,
software, audio, video, texto y fotos) pertenecen a Marmitek BV.
Cada uso del contenido, cada distribución, reproducción, cambio,
publicación y envío sin previo aviso en forma escrita por Marmitek
es estrictamente prohibido. Todos los derechos de propiedad
intelectual y otros derechos de propiedad son aplicables a todas
las reproducciones. Los nombres de otras empresas y productos
mencionados en este manual pueden ser marcas comerciales de
sus respectivas empresas. La mención de productos de terceras
partes tiene únicamente propósitos informativos y no constituye
aprobación ni recomendación. Marmitek declina toda
responsabilidad referente al uso o el funcionamiento de estos
productos.
Leggere attentamente queste istruzioni prima dell’uso di
questo prodotto e conservarle per riferimento futuro.
x Solo per l’uso interno.
x Non utilizzare il prodotto in ambienti umidi o in prossimità di
acqua.
xNon esporre il prodotto a temperature eccessivamente alte o
basse, fonti di luce forte o luce diretta del sole.
xQuesto prodotto non è un giocattolo: tenerlo lontano dalla
portata dei bambini.
xNon aprire mai il prodotto: L’apparecchio può contenere
componenti la cui tensione è estremamente pericolosa.
xBatterie: conservare le batterie fuori dalla portata dei
bambini. Consegnare le batterie agli appositi centri per lo
smaltimento. Non utilizzare mai in combinazione batterie
nuove e vecchie o di tipo diverso. Togliere le batterie quando
l’apparecchio non viene utilizzato per un lungo periodo di
tempo. Inserire correttamente le batterie prestando
attenzione alla polarità (+ / -): un errato posizionamento delle
batterie può provocare una esplosione.
xCollegare l’alimentatore alla presa di corrente solamente
dopo avere controllato che la tensione della rete elettrica
corrisponda alle indicazioni riportate sulla targhetta.
xNon utilizzare mai un alimentatore danneggiato. In tal caso
rivolgersi al proprio rivenditore.
xRiparazioni o modifiche devono essere effettuate
esclusivamente da parte di personale esperto.
xScollegare l’adattatore di alimentazione CA/CC dalla presa di
corrente quando l’apparecchio non viene utilizzato per un
lungo periodo di tempo.
xIn caso di utilizzo scorretto, di riparazioni o modifiche
apportate personalmente decade qualsiasi garanzia. della
responsabilità civile sui prodotti.
xMarmitek declina ogni responsabilità per i danni derivanti da
un utilizzo non appropriato del prodotto o da utilizzo diverso
da quello per cui il prodotto è stato creato.
xMarmitek declina ogni responsabilità per danni
consequenziali ad eccezione della responsabilità civile sui
prodotti.
3 Il prodotto
3.1 Introduzione
Congratulazioni per l’acquisto del Marmitek
Connect 620 UHD 2.0™!
E’ possibile collegare 4 sorgenti HDMI tramite 1 cavo al televisore,
senza perdita di segnale o crittografia. Ideale se il televisore non
dispone di abbastanza ingressi HDMI o per collegare le
apparecchiature con un solo cavo al televisore. Esempi di sorgenti
HDMI: console videogiochi come Playstation e Xbox, lettore Bluray, decoder TV digitale e tutte le altre apparechiature HDMI. Il
Connect 620 UHD 2.0™ supporta Ultra HD (4k), Full HD (1080p)
e tutti i formati 3D ed è adatto a tutte le apparecchiature esistenti
e future. Tutti i nostri prodotti sono stati progettati e fabbricati
secondo i più elevati standard qualitativi. Prima si prega di leggere
con attenzione questo manuale e seguire le istruzioni per godere
appieno le potenzialità di questo prodotto.
3.2 Vantaggi
xAdatto al collegamento contemporaneo di 4 dispositivi HDMI
al tuo TV
xGodere il contenuto più recente Ultra HD e guardare Netflix o
un film Blu-ray in 4K, pur mantenendo il constrasto ottimale
ed i colori splendidi.
xCon ripetitore ed equalizzatore incorporati per la correzione
di un’eventuale perdita di segnale
x Commuta automaticamente e/o con telecomando.
x Supporta HDCP 2.2 per la riproduzione del contenuto 4k
Ultra HD protetto.
Connect 620 UHD 2.0
54
3.3 Caratteristiche HDMI
Indicatori ingressi
A
Selettore ingressi
Sensore IR
xLa capacità di trasferimento massima è di 18 Gbit/s (gigabit
al secondo). Grazie a ciò l’HDMI 2.0 può riprodurre immagini
in 4K Ultra HD a 60 fps (fotogrammi al secondo).Adatto per
l'ultima risoluzione HD Ultra 4K60 (3840 x 2160/60 Hz), High
Dynamic Range (HDR), Deep Color e 4: 4: 4 colori chroma.
xSupporta tutti i formati 3D (adatto all’uso con tutte le
apparecchiature 3D).
xDeep Color 36-bit, (miliardi invece di milioni colori, una
migliore riproduzione delle sottili differenze di gradazione e
un rapporto di contrasto più elevato).
xSupporta Dolby Atmos e DTS:X e tutti gli altri formati audio
comuni.
3.4 Contenuto della confezione
A. 1 x commutatore HDMI (HDMI Switch)
B. 1 x telecomando (batteria inclusa)
C. 1 x adattatore di alimentazione
D. 1 x istruzioni per l’uso
Selezionare con il Connect 620 UHD 2.0™ quale sorgente HDMI
è visualizzata sul televisore. Quando si accende una delle
sorgenti HDMI bronnen, questa commuterà automaticamente
all’apposito ingresso. Se sono state accese più sorgenti HDMI, il
Connect 620 UHD 2.0™ passerà automaticamente alla sorgente
HDMI attivata per ultimo.
Per la disattivazione o riattivazione della commutazione
automatica, tenere premuto per 3 secondi il selettore d’ingresso
sul telecomando. Le spie degli ingressi 3 e 4 si
accendono brevemente per
conferma. Se si desidera
selezionare manualmente
un’altra sorgente HDMI, si
deve sempre premere
brevemente il selettore sul
telecomando, fino a
raggiungere l’apposito ingresso, oppure usare i
selettori d’ingresso diretti (IN1 - IN4), per
commutare direttamente all’ingresso desiderato. È
inoltre possibile usare il selettore sul lato anteriore
del Connect 620 UHD 2.0™.
Nota: la commutazione automatica deve essere supportata dalla
sorgente HDMI. Se non è supportata questa modalità, si deve
selezionare manualmente la corretta sorgente HDMI.
Connect 620 UHD 2.0
58
6 Specificazioni tecniche
Connessioni
Ingresso HDMI 4 x HDMI (19 poli femmina)
Uscita HDMI 1 x HDMI (19 poli femmina)
Lunghezza cavo HDMI max. 15 metri
Video
Risoluzioni supportate 4K
Risoluzioni PC supportate max. QSXGA
Standard HDMI HDMI 2.0b, HDR, CEC, EDID,
Standard HDCP HDCP 2.2 e HDCP 1.4
Formati colore RGB e YCbCr 4:4:4, 4:2:0 of
Profondità colore max. 36-bit.
Capacità di trasmissione max.18 Gbit/s
Frequenza di clock max. 600 MHz
Audio
Formati audio HDMI DTS-HD Master Audio, Dolby
Dolby Atmos, DTS:X, Dolby
DTS 5.1 e PCM stereo.
Alloggiamento
Dimensioni (A x L x P) 120 x 78 x 17 mm
Peso 210 g
(4096x2160)@24/30/50/60Hz,
480i~1080p@50/60Hz,
1080p@120Hz e
3D@1080p/60Hz.
Temperature ambiente +0 fino ai +40° C
Umidità 20% all’90%
Alimentazione
Adattatore esterno 100-240VAC @50-60Hz,
Le caratteristiche tecniche possono essere modificate senza
5VDC @ 1A
preavviso.
Connect 620 UHD 2.0
60
7 Domande frequenti (FAQ)
Mancano l'immagine ed il suono o sono di cattiva qualità
Nel caso che dopo il collegamento del commutatore HDMI manchi
l'immagine o sia di cattiva qualità, cercare di risolvere il problema
collegando uno per uno le apparecchiature allo schermo
(televisore, monitor o proiettore). In tal modo è possibile
determinare se il problema si trova nelle sorgenti HDMI, nei cavi
HDMI, nel commutatore HDMI o nello schermo.
xControllare se l’adattatore di alimentazione è stato collegato
ed inserito nella presa di corrente..
xPer la migliore qualità di immagini e suono usare solo cavi
omologati High Speed HDMI®.
xNon usare cavi HDMI più lunghi di quanto indicato nei dati
tecnici .
xControllare se i cavi e/o connettori HDMI non sono stati
danneggiati.
xSia la sorgente HDMI che lo schermo devono supportare
interamente HDMI.
xControllare se le sorgenti HDMI e lo schermo supportano la
protezione anticopia HDCP 2.2 (High-bandwidth Digital
Content Protection).
Manca la corretta riproduzione 3D
xControllare se è stata impostata la sorgente HDMI corretta
per riprodurre 3D e/o se essa è stata impostata nella
modalità automatica.
xSia la sorgente HDMI che lo schermo HD devono supportare
gli stessi formati 3D.
xControllare se è corretta la riproduzione 3D collegando la
sorgente HDMI direttamente allo schermo HD con un cavo
HDMI.
Ancora domande che non sono state risposte qui sopra?
Visitare www.marmitek.com
Con ciò, Marmitek BV, dichiara che il
Connect 620 UHD 2.0™ è conforme ai requisiti
Direttiva 2004/108/CE del Parlamento Europeo e del Consiglio del
15 dicembre 2004 concernente il ravvicinamento delle legislazioni
degli Stati membri relative alla compatibilità elettromagnetica
Direttiva 2006/95/CE del Parlamento europeo e del Consiglio del
12 dicembre 2006 concernente il ravvicinamento delle legislazioni
degli Stati membri relative al materiale elettrico destinato ad
essere adoperato entro taluni limiti di tensione
Direttiva 2011/65/UE del Parlamento Europeo e del Consiglio
dell’8 giugno 2011 sulla restrizione dell’uso di determinate
sostanze pericolose nelle apparecchiature elettriche ed
elettroniche
Regolamento (CE) n. 278/2009 della Commissione del 6 aprile
2009 recante misure di esecuzione della direttiva 2005/32/CE del
Parlamento europeo e del Consiglio per quanto riguarda le
specifiche di progettazione ecocompatibile relative al consumo di
energia elettrica a vuoto e al rendimento medio in modo attivo per
gli alimentatori esterni
8.2 Riciclaggio
Informazioni relative all’ambiente per i clienti residenti nell’Unione
Europea La direttiva europea 2002/96/EC richiede che le
apparecchiature contrassegnate con questo simbolo sul prodotto
e/o sull’imballaggio non siano smaltite insieme ai rifi uti urbani non
differenziati. Il simbolo indica che questo prodotto non deve
essere smaltito insieme ai normali rifiuti domestici. È
responsabilità del proprietario smaltire sia questi prodotti sia le
altre apparecchiature elettriche ed elettroniche mediante le specifi
che strutture di raccolta indicate dal governo o dagli enti pubblici
locali. Il corretto smaltimento ed il riciclaggio aiuteranno a
essenziali ed alter disposizioni relative alla Direttiva:
Connect 620 UHD 2.0
62
prevenire conseguenze potenzialmente negative per l’ambiente e
per la salute dell’essere umano. Per ricevere informazioni più
dettagliate circa lo smaltimento delle vecchie apparecchiature in
vostro possesso, vi invitiamo a contattare gli enti pubblici di
competenza, il servizio di smaltimento rifiuti o il negozio nel quale
avete acquistato il prodotto.
8.3 Diritti d’autore
Marmitek è un marchio commerciale di Germatron BV.
Connect 620 UHD 2.0™ è un marchio commerciale di Marmitek
BV.
Tutti i diritti riservati. Marmitek si è impegnata perché le
informazioni contenute in questo manuale fossero il più possibile
precise. Marmitek declina ogni responsabilità per eventuali errori
di stampa. I diritti d'autore e tutti gli altri diritti di proprietà
intellettuale sul contenuto (inclusi ma non limitati a numeri di
modelli, software, audio, video, testi e fotografie) spettano a
Marmitek BV. È strettamente proibito ogni uso del Contenuto,
incluse senza limitazioni la distribuzione, riproduzione, modifica,
pubblicazione o trasmissione senza previa autorizzazione scritta
da parte di Marmitek. Tutti i diritti d’autore e altri diritti di proprietà
intellettuale su tutte le riproduzioni devono essere conservati. I
nomi di altre società e prodotti qui menzionati potrebbero essere
marchi delle rispettive società. La citazione di prodotti di terze
parti è a solo scopo informativo e non costituisce alcun impegno o
raccomandazione. Marmitek declina ogni responsabilità riguardo
l’uso e le prestazioni di questi prodotti.
Lees deze gebruiksaanwijzing zorgvuldig door voordat u het
apparaat gaat gebruiken en bewaar deze gebruiksaanwijzing
om deze indien nodig te kunnen raadplegen.
x Uitsluitend voor gebruik binnenshuis.
x Gebruik het product niet in een vochtige omgeving of nabij
water.
xStel het product niet bloot aan extreem hoge of lage
temperaturen, sterke lichtbronnen of direct zonlicht.
xDit product is geen speelgoed. Buiten bereik van kinderen
houden.
xHet product nooit openmaken: de apparatuur kan onderdelen
bevatten waarop levensgevaarlijke spanning staat.
xHoud batterijen buiten bereik van kinderen. Lever batterijen
in als klein chemisch afval. Gebruik nooit oude en nieuwe
batterijen of verschillende typen batterijen door elkaar.
Verwijder de batterijen wanneer u het systeem langere tijd
niet gebruikt. Let bij het inleggen van de batterijen op de
polariteit (+ / -): verkeerd inleggen kan explosiegevaar
opleveren.
xSluit de voedingsadapter pas op het lichtnet aan als u zeker
weet dat de netspanning overeenkomt met de waarde op de
typeplaatjes.
xSluit een voedingsadapter nooit aan wanneer deze
beschadigd is. Neem in dat geval contact op met uw
leverancier.
x Laat reparatie of service alleen over aan deskundig
personeel.
xHaal de AC/DC voedingsadapter uit het stopcontact wanneer
u het apparaat langere tijd niet gebruikt.
xBij oneigenlijk gebruik, zelf aangebrachte veranderingen of
reparaties, komen alle garantiebepalingen te vervallen.
xMarmitek aanvaardt geen productaansprakelijkheid bij onjuist
gebruik van het product of door gebruik anders dan waarvoor
het product is bestemd.
xMarmitek aanvaardt geen aansprakelijkheid voor volgschade
anders dan de wettelijke productaansprakelijkheid.
3 Uw product
3.1 Introductie
Gefeliciteerd met de aankoop van de Marmitek Connect 620 UHD
2.0™!
U kunt 4 HDMI bronnen met 1 kabel aansluiten op uw tv, zonder
enig signaal of encryptieverlies. Ideaal wanneer uw tv te weinig
HDMI ingangen heeft of wanneer u de apparaten met maar 1
kabel naar uw tv wilt aansluiten. Voorbeelden van HDMI bronnen
zijn; spelcomputers zoals Playstation en Xbox, Blu-ray speler,
digitale tv decoder en alle overige HDMI apparaten. De Connect
620 UHD 2.0™ ondersteunt Ultra HD (4K), Full HD (1080p) en
alle 3D formaten en is daarmee geschikt voor al uw bestaande en
toekomstige apparatuur. Al onze producten zijn ontwikkeld en
gefabriceerd naar de hoogst mogelijke kwaliteitseisen. Lees a.u.b.
eerst deze handleiding en volg de aanwijzingen zodat u optimaal
kunt genieten van de mogelijkheden van dit product.
3.2 Voordelen
xGeschikt voor het gelijktijdig aansluiten van 4 HDMI
apparaten op uw tv.
xGeniet van de nieuwste Ultra HD content en kijk naar Netflix
of een Blu-ray film in 4K met behoud van ultiem contrast en
prachtige kleuren.
xMet ingebouwde repeater en equalizer voor het corrigeren
van eventueel signaalverlies
x Schakelt automatisch en/of met afstandsbediening.
x Ondersteunt HDCP 2.2 voor het afspelen van beveiligde 4K
Ultra HD-content.
Connect 620 UHD 2.0™
66
3.3 HDMI eigenschappen
Input indicatoren
A
Input selectie
IR sensor
xMaximale doorvoersnelheid is 18 Gbit/s (gigabit per
seconde). Hierdoor kan HDMI 2.0, Ultra HD 4K beelden
weergeven in 60 fps (frames per seconde).
xGeschikt voor de nieuwste Ultra HD 4K60 resolutie (3840 x
2160 / 60 Hz), High Dynamic Range (HDR), Deep Color en
4:4:4 chroma kleuren.
xDeep Color 36-bit, (miljarden i.p.v. miljoenen kleuren, betere
weergave van subtiele gradatieverschillen en hogere
contrastverhouding)
xOndersteunt alle 3D formaten (geschikt voor gebruik met uw
eigen 3D apparatuur)
xOndersteunt Dolby Atmos en DTS:X en alle overige
gangbare audioformaten.
3.4 Inhoud van de verpakking
A. 1 x HDMI switcher
B. 1 x Afstandsbediening (inclusief batterij)
C. 1 x Voedingsadapter
D. 1 x Gebruiksaanwijzing
Met de Connect 620 UHD 2.0™ kiest u welke HDMI bron op de tv
wordt weergegeven. Wanneer u één van de HDMI bronnen
aanzet zal deze automatisch naar de juiste ingang schakelen.
Indien meerdere HDMI bronnen zijn aangezet zal de Connect 620
UHD 2.0™ automatisch naar de laatst actief geworden HDMI bron
schakelen.
Om automatisch schakelen te deactiveren of weer te activeren,
houdt u de input selectie knop op de afstandsbediening 3
seconden ingedrukt. Input lampje 3 en 4 lichten dan kort op ter
bevestiging. Indien u handmatig
een andere HDMI bron wilt
selecteren dan drukt u de input
selectie knop op de
afstandsbediening steeds
kortstondig in totdat u de juiste
input heeft bereikt of u gebruikt de directe input
selectie knoppen (IN1 t/m IN4) om direct naar de
gewenste input te schakelen. U kunt hiervoor ook
de “Select” knop op de voorzijde van de Connect
620 UHD 2.0™ gebruiken.
Opmerking: automatisch schakelen moet ondersteund worden
door de HDMI bron. Indien dit niet ondersteund wordt, moet u zelf
de juiste HDMI bron selecteren.
Connect 620 UHD 2.0™
70
6 Technische specificaties
Aansluitingen
HDMI ingang 4 x HDMI (19-pin female)
HDMI uitgang 1 x HDMI (19-pin female)
HDMI kabellengte maximaal 15 meter
Video
Ondersteunde resoluties 4K
Ondersteunde pc resoluties max. QSXGA
HDMI standaarden HDMI 2.0b, HDR, CEC, EDID,
HDCP standaarden HDCP 2.2 en HDCP 1.4
Kleurformaten RGB en YCbCr 4:4:4, 4:2:0 of
Specificaties kunnen wijzigen zonder voorafgaande melding
hiervan.
Connect 620 UHD 2.0™
72
7 Veelgestelde vragen (FAQs)
Geen (of slecht) beeld en geluid
Indien u slecht of geen beeld ervaart na het aansluiten van de
HDMI switcher, probeer dan het probleem te achterhalen door de
apparaten één voor één aan te sluiten op uw tv of projector. Op
deze manier kunt u bepalen of het probleem zich bevindt in de
HDMI bronnen, de HDMI kabels, de HDMI switcher of de tv.
xControleer of de voedingsadapter is aangesloten en in het
stopcontact zit.
xGebruik uitsluitend High Speed HDMI® gecertificeerde
kabels voor de beste beeld- en geluidskwaliteit.
xGebruik geen HDMI kabels die langer zijn dan gespecificeerd
in de technische gegevens
xControleer of de HDMI kabels en/ of connectoren niet
beschadigd zijn
xZowel de HDMI bron als uw tv of projector dient HDMI
volledig te ondersteunen
xControleer of uw HDMI bronnen en tv of projector de
kopieerbeveiliging HDCP 2.2 (High bandwidth Digital Content
Protection) ondersteunen.
Geen correcte 3D weergave
xControleer of de HDMI bron is ingesteld om 3D weer te
geven en/ of dat deze op automatisch staat.
xZowel de HDMI bron als uw HDTV of projector moet dezelfde
3D formaten ondersteunen.
xControleer of 3D correct wordt weergegeven door de HDMI
bron direct op uw HDTV of projector aan te sluiten met een
HDMI kabel.
Heeft u vragen die hierboven niet beantwoord worden? Kijk dan
op www.marmitek.com
Bij deze verklaart Marmitek BV, dat deze Connect 620
UHD 2.0™ voldoet aan de essentiële eisen en aan de
Richtlijn 2014/30/EU van het Europees Parlement en de Raad van
26 februari 2014 betreffende de harmonisatie van de wetgevingen
van de lidstaten inzake elektromagnetische compatibiliteit
(herschikking).
Richtlijn 2014/35/EU van het Europees Parlement en de Raad van
26 februari 2014 betreffende de harmonisatie van de wetgevingen
van de lidstaten inzake het op de markt aanbieden van elektrisch
materiaal bestemd voor gebruik binnen bepaalde
spanningsgrenzen.
Richtlijn 2011/65/EU van het Europees Parlement en de Raad van
8 juni 2011 betreffende beperking van het gebruik van bepaalde
gevaarlijke stoffen in elektrische en elektronische apparatuur.
Verordening (EG) Nr. 278/2009 van de Commissie van 6 april
2009 houdende tenuitvoerlegging van Richtlijn 2005/32/EG van
het Europees Parlement en de Raad, wat betreft voorschriften
inzake ecologisch ontwerp voor het elektrisch opgenomen
vermogen van externe stroomvoorzieningen in niet-belaste
toestand en de gemiddelde actieve efficiëntie van externe
stroomvoorzieningen
8.2 Recycling
Milieu-informatie voor klanten in de Europese Unie
gescheiden huishoudelijk afval. Dit symbool geeft aan dat het
product apart moet worden ingezameld. U bent zelf
verantwoordelijk voor de vernietiging van deze en andere
elektrische en elektronische apparatuur via de daarvoor door de
landelijke of plaatselijke overheid aangewezen
inzamelingskanalen. De juiste vernietiging en recycling van deze
overige relevante bepalingen van Richtlijnen:
De Europese Richtlijn 2002/96/EC schrijft voor dat
apparatuur die is voorzien van dit symbool op het product of
de verpakking, niet mag worden ingezameld met niet-
Connect 620 UHD 2.0™
74
apparatuur voorkomt mogelijke negatieve gevolgen voor het
milieu en de gezondheid. Voor meer informatie over het
vernietigen van uw oude apparatuur neemt u contact op met de
plaatselijke autoriteiten of afvalverwerking dienst, of met de winkel
waar u het product hebt aangeschaft.
8.3 Auteursrechten
Marmitek is een handelsmerk van Germatron BV.
Connect 620 UHD 2.0™ is een handelsmerk van Marmitek BV.
Alle rechten voorbehouden.
Deze handleiding is met uiterste zorg samengesteld. Marmitek
aanvaardt geen aansprakelijkheid voor druk- of typefouten.
Auteursrechten en alle andere eigendomsrechten op de inhoud
(inclusief maar niet beperkt tot model nummers, software, audio,
video, tekst en foto's) berust bij Marmitek BV. Elk gebruik van de
inhoud, maar zonder beperking, distributie, reproductie, wijziging,
openbaarmaking of verzending zonder de voorafgaande
schriftelijke toestemming van Marmitek is strikt verboden. Alle
auteursrechten en andere eigendomsrechten dienen te worden
behouden op alle reproducties.
Andere in deze handleiding genoemde bedrijfs- of productnamen
kunnen handelsmerken van de desbetreffende bedrijven zijn.
Producten van andere fabrikanten worden alleen genoemd ter
informatie. Dit betekent niet dat deze producten door Marmitek
worden aanbevolen of door Marmitek zijn goedgekeurd. Marmitek
aanvaardt geen enkele aansprakelijkheid met betrekking tot de
betrouwbaarheid van deze producten.