Marlo HVD User Manual

VENT DUCT

_____"

1"x2" 16 S/S ANGLE COLLAR

SECURED TO VENT STACK

POSITIONED TO SUPPORT

FINISHED CEILING

18 S/S ALL WELDED CONSTRUCTION

VAPOR PROOF TO FIT INSIDE

OPENING ON DISHMACHINE

(INSTALLED IN FIELD BY OTHERS)

DISHWASHER VENT STACK

L x W x H: COORDINATE

W/ DISH WASHER PER SPEC.

HVD SERIES

ITEM #

QTY.

PROJECT:

CONSULTANT:

CONSTRUCTION FEATURES

 BODY- 18 GA. STAINLESS STEEL, ALL EXTERIOR IS SEAMLESSLY WELDED.

#HVD

 ALL 16 GA. STAINLESS STEEL CONST.

 LOUVER SIDES

*NOTE: OTHER OPTIONS AND ACCESSORIES AVAILABLE. PLEASE SEE ACCESSORY PAGE AT THE END OF THIS SECTION.*

MARLO MANUFACTURING COMPANY INC.

OPTIONS AND ACCESSORIES

 DAMPER

 ROUND CONSTRUCTION

SPECIFY DIAMETER

Is the Leader in “PRE-ENGINEERED” Custom Fabrication

301 Division Street Boonton, NJ 07005

PHONE: [phone] FAX: [phone]

TOLL FREE: [phone]

DISHWASHER MAKE__________________

DISHWASHER MODEL NUMBER____________________

 OTHER:____________________

WEB SITE: WWW.MARLOMFG.COM

MARLO MFG is constantly engaged in a program of improving
our products. Therefore, we reserve the right to
change specications without prior notice.

PAGE

E-34