How it Works
Marley
Loading...
Smart
Operation Manual
16 pgs980.35 Kb0

Marley Smart, FSSWH2004, HT1502SS, FSSWH1502, HT2024SS Operation Manual

Download
Page 1
Smart Series
Wall Heater Operations Manual
Models: HT2024SS 240V, 2000W
FSSWH2004 240V, 2000W HT1502SS 120V, 1500W FSSWH1502 120V, 1500W
Save This Manual
™
1
Page 2
Index
Features that are functional ........................................................................... pg. 3
Thermostat Display Functionality of touch screen buttons Operating instructions Initial setup instructions Setup day and time Procedure Homeowner setup instructions Automatic Mode - Factory Setting Customize your settings Celsius or Fahrenheit indication Lockout feature Night light operation Hold option or vacation mode Remote controller
Fan only operation (no heat) Touch pad audible beep control
2
....................................................................................... pg. 4
............................................................ pg. 5
.................................................................................... pg. 6
................................................................................. pg. 6
........................................................................ pg. 6
....................................................................... pg. 8
................................................................ pg. 8
................................................................................. pg. 9
.................................................................. pg. 12
............................................................................................ pg. 12
.................................................................................... pg. 13
...................................................................... pg. 14
......................................................................................... pg. 14
........................................................................ pg. 15
................................................................... pg. 15
Page 3
Touch Screen Control Board
OPERATIONS MANUAL
FEATURES THAT ARE FUNCTIONAL
1. 2” X 6” Electronic LED Display with blue backlight
- Easy to read, in the dark or lighted areas
2. Touch Screen surface with soft signal beeps
3. Fahrenheit or Celsius readout
4. 7 day (5 and 2) programmable settings, up to 4 settings per day
5. Manual or Preset automatic mode selection
6. Proportional temperature control
7. Power Memory Function (time and operating mode)
8. Lock-out feature
9. Night Light
10. Built-in Safety feature to alert status of the thermal safety limit
11. Vanishing display readout (only ON/OFF and MODE icons appear)
12. Turn signal beeps OFF.
FUNCTIONALITY OF TOUCH SCREEN
3
Page 4
THERMOSTAT DISPLAY
Time Periods 1 = Wake up period 2 = Daytime period 3 = Evening Period 4 = Sleep Time
Days of week Group 1 (Mon to Fri) Group 2 (Sat & Sun)
Time of day This area is also used when pro­gramming custom periods
Ambient temperature
Fan operation
Automatic Mode
Hold function
Down icon
On / Off icon
4
Centigrade Setting
Fahrenheit Setting
Tamper proof setting
Proportional heat control indicator
Night light indicator
Up icon
Mode icon
Page 5
ICONS (For Touch Screen only)
Note: The four icons (touch pads) shown below control the setting and operation of the heater as indicated.
ON/OFF icon (in OFF position, this icon is orange and half the
brightness.
Setup parameter DOWN icon
Setup parameter UP icon
Functional MODE icon
Caution: It is not necessary to push/press the icons to work. They are sen­sitive to touch, not pressure.
5
Page 6
OPERATING INSTRUCTIONS
1. Whentheheatingunitisrstpoweredup,itwilldefaulttotheOFFposition.
The power ON /OFF icon in the lower left corner of the display will il­luminate an orange color.
INITIAL SETUP INSTRUCTIONS (This setup is usually performed by the installer)
1. Touch ON /OFF icon located in the lower left corner of the display. The Icon will illuminate a bright blue color, indicating the heater is ON.
Note: For all the following setup procedures, the display will automatically reset after a 30 second pause. If this occurs, start back at step 1 of the setup proce­dures.
SETUP DAY AND TIME PROCEDURE (This setup is usually performed by the installer)
1. Simultaneously touch and hold the UP Icon and DOWN Icon for 1.5 seconds. A beep will sound and the Day indicator at the top of the display
willash.
2. Using the UP Icon or DOWN Icon adjust to appropriate DAY of week.
6
Page 7
SETUP DAY AND TIME PROCEDURE (This setup is usually performed by the installer)
3. TouchtheMODEicon.AM/PMindicatorwillash.UsetheUP Icon
and DOWN Icon to set appropriate time. AM / PM will change auto­matically once you pass 12:00.
4. TouchtheMODEicon.MINUTESwillash.UsetheUP Icon and DOWN Icon to set MINUTES to the appropriate time.
5. To lock in your settings, touch the MODE icon.
Note: If this setup is performed by the installer, power down the display unit by touching the power ON / OFF icon if no other programming will be done at this time.
7
Page 8
HOMEOWNER SETUP INSTRUCTIONS
1. The digital display has default settings for the “Automatic Mode”.
See default settings below. If these settings are satisfactory please skip to the next programming option, Celsius and Fahrenheit (page 12). If not, follow the steps below for “Customized Settings”.
AUTOMATIC MODE --- FACTORY SETTINGS
PERIOD TIME SETPOINT
Wake-UP 6:00 AM 70ºF (21ºC) Daytime 8:00 AM 62ºF (17ºC) Evening 6:00 PM 70ºF (21ºC) Sleep Time 10:00 PM 62ºF (17ºC)
8
Page 9
CUSTOMIZE YOUR SETTINGS
Note: You can customize ON and OFF times and temperature for two catagories, Weekdays (MON - FRI) and Weekends (SAT & SUN). Each category has 4 settings.
Wake-Up Daytime Evening Sleep Time.
Please set a start time and temperature for each period.
1. To start setup, simultaneously touch and hold the ON / OFF icon and
MODE icon for 1.5 seconds. MON through FRI will illuminate at the
top of the display with the hour and Period 1. This is your wake-up time.
2. Touch MODE icon to start programming the HOURS for Period 1 (Monday through Friday). Touch either the UP Icon or the Down Icon to set START time in hours.
3. Touch MODE icon again to start programming the MINUTES for Period
1. (Wakeup) Touch either the UP Icon or the DOWN Icon to set Minutes.
CUSTOMIZ
9
Page 10
CUSTOMIZE YOUR SETTINGS
4. Touch MODE icon again to start programming the “Set Temperature Setting”(Wake Up). Touch UP Icon or the Down Icon to set tem­perature for Wake Up.
5. Touch MODE icon to start programming the HOURS for Period 2 (Day- time Period). Touch either the UP Icon or the DOWN Icon to set START time in hours.
6. Touch MODE icon again to start programming the MINUTES for Period 2 (Daytime). Touch either the UP Icon or the DOWN Icon to set MINUTES.
7. Touch MODE icon again to start programming the “Set Temperature Set­ting” (Day Time). Touch UP Icon or the DOWN Icon to set TEM­PERATURE. for day time.
8. Touch MODE icon to start programming the HOURS for Period 3 (Eve- ning Period). Touch either the UP Icon or the DOWN Icon to set START time in hours.
9. Touch MODE icon again to start programming the MINUTES for Period 3 (Evening). Touch either the UP Icon or the DOWN Icon to set MINUTES.
10
Page 11
CUSTOMIZE YOUR SETTINGS
10. Touch MODE icon again to start programming the “Set Temperature Set­ting” (Evening). Use the UP Icon or the Down Icon to set temperature for evening.
11. Touch MODE icon to start programming the HOURS for Period 4 (Sleep Time Period). Touch either the UP Icon or the Down Icon to set START time in hours.
12. Touch MODE icon again to start programming the MINUTES for Period
4. (Sleep Time) Touch either the UP Icon or the DOWN Icon
to set Minutes.
13. Touch MODE icon again to start programming the “Set Temperature Set­ting” (Sleep Time). Use the UP Icon or the Down Icon to set tempera­ture for sleep.
14. Touch MODE icon to start programming the HOURS for Period (Satur- day and Sunday). Touch either the UP Icon or the Down Icon to set START time in hours.
15. Repeat steps 3 through 14 for the weekend Periods.
11
Page 12
CUSTOMIZE YOUR SETTINGS
16. Once the steps are completed above, Touch MODE icon to set all the information programmed in above steps. The display is now back to Normal/Standard operation.
CELSIUS OR FAHRENHEIT INDICATION
1. Simultaneously touch and hold MODE icon and DOWN Icon icon for
1.5 seconds. Notice either the ºC symbol or the ºF symbol is illuminated. Touch both icons again to toggle back and forth from ºC to ºF.
2. Once decided, the display will lock in place after 30 seconds.
LOCKOUT FEATURE
1. Touch and hold ON/OFF and DOWN Icon simultaneously for 1.5 seconds. Notice that the Padlock symbol under the Celsius and Fahrenheit symbols will illuminate. Touch and hold both icons again to toggle Padlock symbol ON or Padlock symbol OFF.
Note: With the Padlock symbol ON, the unit is locked out and the “customized” settings cannot be changed.
2. Once decided, the display will lock in place after 30 seconds.
12
LOCKOUT FEATURE
Page 13
NIGHT LIGHT OPERATION (Also this will allow display to fully illuminate display)
1. Touch and hold MODE Icon and UP Icon simultaneously for 1.5 seconds. Notice that the “Light bulb” symbol will illuminate. Touch both
icons again and the “Light Bulb” will not illuminate.
2. Once decided, the display will lock in place after 20 seconds.
Note: Without the NIGHT LIGHT Icon illuminated, the display will darken except the ON/OFF and MODE icons.
Tip: Touch any of the remote controller icons (except OFF) and all the lights will illuminate on the display, but will turn OFF again in 20-60 seconds. Instead of using the remote controller you can simply touch the MODE icon once and get the same results.
HOLD OPTION OR VACATION MODE
1. Touch MODE icon once to activate the display and keep touching until theHOLDIconappearsinbrightblueandashing.TouchtheUp Icon or the Down Icon to set temperature back or up to your “Hold” temperature.
2. Once decided, the display will lock in place after 30 seconds or Touch MODE icon.
13
Page 14
REMOTE CONTROLLER
This tiny device is a remote means to control your heater from a distance no more than 12 feet away from the display. When pointing the device it must be in line of sight in order to operate correctly. There are only four icons that are active.
1. Power ON button.
2. Power OFF button.
3. Button to lower the displayed temperature. (located bottom left)
4. Button to raise the displayed temperature. (located bottom right)
This remote is not intended to program your settings. It is mainly a device to conveniently change the temperature or turn your heater ON or OFF.
Note: Should you misplace your remote; the operation of your heater can be controlled at the heater display.
14
Page 15
FAN ONLY OPERATION (NO HEAT)
This heater also has the option to use as a FAN ONLY device. Heat will not be produced, but the ventilator fan will operate to provide a nice gentle breeze to circulate the air.
1. Make sure your heat selection is low enough, or turn OFF the call for heat.
2. Touch the MODE iconuntilyouseetheFANiconilluminateandash.
3. Touch the MODE icon again to lock the setting in place.
TURN OFF AUDIBLE BEEP
It may be your choice to silence the audible beep. To do so, follow these instructions.
1. Make sure the unit is OFF.
2. Simultaneously touch the ON/OFF and Icons until either a 1 or 0 is displayed. 1= Beeper ON, 2= Beeper OFF.
3. Press the Up or Down Icons to make a selection between 1 or 0.
4. Once you have made your selection between 1 or 0 then press the Icon to lock in your selection.
Note: Should you want to turn the beeper ON again, follow the same steps above.
15
Page 16
5200-11047-001 2/11
ECR 38987
16
470 Beauty Spot Road E
Bennettsville, SC 29512
www.marleymep.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use