◢MR6121E UHF reader user manual (Ver 1.0)◣
MR6121E
UHF Reader User Manual
1
Shenzhen Marktrace Co., Ltd
Address:
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
Post:518057
R.C.
Phone:0755-2654 6392 FAX:0755-2655 3743
E-mail :technical@marktrace.com
Website:www.marktrace.com
◢MR6121E UHF reader user manual (Ver 1.0)◣
2
Dear Customer:
Many thanks for bought Marktrace device.
Go through precuts user manual carefully before you
operate. To make sure Marktrace device work correct. Any
questions, please contact us. We welcome your feedback and
comments.
Shenzhen Marktrace Co.,Ltd.
Address:
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
Post:518057
R.C.
Phone:0755-2654 6392 FAX:0755-2655 3743
E-mail :technical@marktrace.com
Website:www.marktrace.com
◢MR6121E UHF reader user manual (Ver 1.0)◣
3
MR6121E UHF reader User Manual
(Ver1.0)
Disclaimer
Martkrace reserve the right to update and modify this user manual. For the
new documents may have no further notice.
Don’t tear up the warranty label or take reader apart to repair by yourself, we
reject perform warranty duties if this happened.
Shenzhen Marktrace Co.,Ltd have trademark right on the trademark which in
this user manual and receive legal protection. DO NOT make free with theses
trademarks.
®
Customer Service Center
Phone: 400-022-3382 0755-2654 6392/2654 4205
Fax: 0755-2655 3743
E-mail: technical@ marktrace.com
Website: http://www.marktrace.com
Address:Floor 3/5, Block D,Changyuan New Material Port, No
2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.R.C.
Post: 518057
Address:
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
Post:518057
R.C.
Phone:0755-2654 6392 FAX:0755-2655 3743
E-mail :technical@marktrace.com
Website:www.marktrace.com
◢MR6121E UHF reader user manual (Ver 1.0)◣
Contents
1 MATTERS NEED ATTENTION............................................... 6
2 READER INSTRUCTION.................................................... 7
2.1
UHF READER INTRODUCTION ............................................... 7
2.2
R EADER INSTRUCTION ..................................................... 7
2.3
R EADER APPLICATIONS .................................................... 8
2.4
R EADER MAIN FUNCTIONS .................................................. 8
2.5
R EADER TECHNICAL PARAMETER ............................................ 9
3 READER STRUCTURE AND INTERFACE EXPLANATION..................... 10
3.1
R EADER S TRUCTURE E XPLANATION ......................................... 10
3.2
E XPLANATION ON THE READER COMMUNICATION INTERFACE ..................... 10
4 QUICK START GUIDE..................................................... 12
5 READER PARAMETER CONFIGURATION................................... 14
5.1
W EBPAGE CONFIGURATION ................................................ 14
5.2
D EMO SOFTWARE C ONFIGURATION ......................................... 17
4
5.2.1 Reader connection .................................................. 17
5.2.2 Antenna & RF Power setting.......................................... 17
5.2.3 Frequency Setting................................................... 18
5.2.4 Working Mode Setting................................................ 18
5.2.5 Buzzer & LED Setting ............................................... 19
5.2.6 IP Address Setting .................................................. 19
5.2.7 GPIO Setting ....................................................... 20
6 DEMO SOFTWARE DEMONSTRATION ..................................... 21
EPC G EN2 TAG D EMONSTRATION .......................................... 21
6.1
6.1.1 Multi tag Identify .................................................... 21
6.1.2 Multi Tag Read & Write .............................................. 22
6.1.3 Tag Filter .......................................................... 23
6.1.4 EPC Gen2 Tag Lock ................................................ 24
6.1.5 EPC Gen2 Tag Read and write with Access Password ................... 25
6.1.6 EPC Gen2 Tag Kill. ................................................. 26
ISO18000-6B P ROTOCOL TAG D EMONSTRATION .............................. 26
6.2
Address:
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
Post:518057
R.C.
Phone:0755-2654 6392 FAX:0755-2655 3743
E-mail :technical@marktrace.com
Website:www.marktrace.com
◢MR6121E UHF reader user manual (Ver 1.0)◣
6.2.1 ISO18000-6B tag Identify ............................................ 26
6.2.2 Multi-tag user data reading ........................................... 27
6.2.3 Single tag data reading and read with UID .............................. 28
6.2.4 Single tag writing and write with UID ................................... 29
6.2.5 Single tag data lock ................................................. 29
6.2.6 Single tag lock and query ............................................ 29
7 READER STRUCTION AND INSTALLATION SKETCH MAP ................... 31
8 SECONDARY DEVELOPMENT ............................................. 32
9 COMMON FAULTS AND EXCLUSION METHODS ............................ 33
5
Address:
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
Post:518057
R.C.
Phone:0755-2654 6392 FAX:0755-2655 3743
E-mail :technical@marktrace.com
Website:www.marktrace.com
◢MR6121E UHF reader user manual (Ver 1.0)◣
6
1 Matters need attention
1、 Dismantle and parts replace: Marktrace has no warranty duties on those
faults which caused by dismantle and parts replace by customer .;
2、 Power supply: please use the power adaptor which alone with precuts to
get power. If not may harm the products.;
3、 Falling damage: Mind parts damage by device falling, if this happens, turn
off power immediately and connect the distributor or Marktrace customer
service center.;
4、 Unusual condition: Away from fire. If you find unusual odor when you use
this products, or reader on overheating or emitting smog, please power off
immediately and drop plug form the plug seat. You can connect the
distributor or Marktrace customer service center for helps. If you continue
to use this device, may cause the danger of fire or electronic shock.;
5、 Place: Don’t place device on the site which is not level, mind damage or
personal injury on falling.
Address:
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
Post:518057
R.C.
Phone:0755-2654 6392 FAX:0755-2655 3743
E-mail :technical@marktrace.com
Website:www.marktrace.com
◢MR6121E UHF reader user manual (Ver 1.0)◣
2 Reader instruction
2.1 UHF reader introduction
Model Description Parameter Photo
7
MR6121E
Mid-range
integrated
reader
9dBi Gain
antenna
inside
2.2 Reader instruction
This products has the features like multi protocol compatible, multi-tag identify,
multi-tag multi area read and write, fast reader speed, can connect to four
antennas etc.:
1、 Accord with ISO18000-6B and ISO18000-6C(EPC-GEN2) standard;
2、 Use unique anti-collision algorithm, has the super multi-tag identify ability;
3、 Have tag identify function and data area read, write, lock and kill these
functions. And supply the suit API to customer to do secondary
development.;
4、 Multi-tag identify ability: The MAX reader range can reach 8 meters.can
connect the different gain antenna 9dBi, can identify the tag which moving
speed is 120km/h correctly;
5、 Tag identify speed: Single tag 2000 times/minute , multi-tag
200pcs/second;
6、 Reader will detect antenna when it get power. In case to protect antenna
port. The one has no antenna connect will not send RF power.;
Address:
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
Post:518057
R.C.
Phone:0755-2654 6392 FAX:0755-2655 3743
E-mail :technical@marktrace.com
Website:www.marktrace.com
◢MR6121E UHF reader user manual (Ver 1.0)◣
8
7、 Have RS232、 RS485、 Weigand、 TCP/IP、 Relay etc output interface;
8、 Compatible with tag match function, Reader can identify the tag which
match the condition or not identify these condition tags by setting the
match conditions.;
10、 Compatible with data cache function, Using FRAM (ferroelectric memory)
which can save data when power down, memory capacity is 32KBytes,
Can save 2200 pcs tag data in 12 Bytes data length.
2.3 Reader applications
This reader can used in items identification and data collecting project. As the
best performance of this reader, the reader are widely use in various RFID
system, reference application as below:
1, Transportation management: highway management, railway management
and container management etc.
2, Motor vehicle management: can control and manage motor vehicle in
Ministry of Public Security or Ministry of Communications.
3, Rode and bridge charge management: As this reader have the ability of
collecting tag data in long range distance, can used in rode and bridge ETC
system.
4, Customs declare management: custom declare, goods transfer and vehicle
management.
5, Logistics and warehouse Management: Goods flow, warehouse
management, and the flowing management of mail, parcel, luggage.
6, Productive lines Management: Production process fixed Identify or
technological process control.
2.4 Reader main functions
1、 Read tag data: Can read multi-tag same area and same data length in a
same time;
Address:
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
Post:518057
R.C.
Phone:0755-2654 6392 FAX:0755-2655 3743
E-mail :technical@marktrace.com
Website:www.marktrace.com
◢MR6121E UHF reader user manual (Ver 1.0)◣
2、 Write tag: Can write the same data length in multi-tag’s same area.;
3、 Tag match: Can read match tag or dismatch tag via setting the match
conditions;
4、 Make data communicate and change with the connection between
standard communication interface and controller or PC,;
2.5 Reader technical parameter
1、 CompatibleISO18000-6B and ISO18000-6C(EPC-GEN2) protocol
standard;
2、 Working frequency: fixed-frequency can choose ISM 902~ 928MHz
( America)、 stepped frequency is 500kHz; modulation mode is ASK.
9
3、 Trigger working mode: Timer and I/O can trigger reader,Timer interval
from 10-990ms; I/O trigger MAX time is 255s;
4、 Data pre-processing: On trigger working mode, Tag data can store in
cache or output directly.;
5、 Data cache:Trigger working mode data cache using FRAM (ferroelectric
memory) which can save data when power down, memory capacity is
32KBytes, Can save 2200 pcs tag data in 12 Bytes data length;
6、 Data output:Data return by instant messaging,Can config RS232、RS485、
Weigand、TCP/IP、Relay interface, Can config output data length and start
address, Output data format in ASCII;
7、 Compatible ISO18000-6C tag match function , match tag by setting
conditions;
8、For ISO18000-6B tag. Can do read, write, lock and identify operate to single
tag one byte , can read and write specific tag data with UID;
9、 Working voltage: DC+9V~
+15V;
10、 Working temperature: -20℃~ +60℃;
11、Storage temperature: -40℃~ +85℃;
Address:
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
Post:518057
R.C.
Phone:0755-2654 6392 FAX:0755-2655 3743
E-mail :technical@marktrace.com
Website:www.marktrace.com
◢MR6121E UHF reader user manual (Ver 1.0)◣
3 Reader Structure and Interface Explanation
3.1 Reader Structure Explanation
1、 MR6121E integrated reader structure explanation
10
3.2 Explanation on the reader communication interface
1. RS232: the Reader provides standard RS232 communication interface as
the output port for data modulation. RS232 has 8 data bits format: 1 start bit
and 1 stop bit, no parity bit. The default baud rate is 115200 bps. The
interface supports the reader parameters configuration, software upgrading,
demo program and all functions for series communication with
development kit with functions package;
2. RJ45(Ethernet Port): 100M Ethernet, TCP Server Mode; It is main mode
for connecting communication with PC, also can be data output main
mode , The interface supports the reader parameters configuration,
software upgrading, demo program and all functions for TCP/IP
communication with development kit with functions package;
3. Data Interface DB15 diagram and pin definition
Address:
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
Post:518057
R.C.
Phone:0755-2654 6392 FAX:0755-2655 3743
E-mail :technical@marktrace.com
Website:www.marktrace.com