Marktech MTN7456-11C, MTN4456R-11A, MTN4456R-11C, MTN5456-11A, MTN5456-11C Datasheet
...
0.56" F0.56" F
0.56" F
0.56" F0.56" F
our Digit Displaour Digit Displa
our Digit Displa
our Digit Displaour Digit Displa
yy
y
yy
FEAFEA
FEA
FEAFEA
· Low Current Requirements · High Light Output
· Additional colors/materials available · IC Compatible
OPTOPT
OPT
OPTOPT
MTN5456-11C 700 Red Grey White 30 5 85 2.1 3.0 20 100 5 0.8 10 1
MTN2456-11C 567 Green Grey White 30 5 85 2.1 3.0 20 100 5 2.9 10 1
MTN4456R-11C 635 Hi-Eff. Red Red Red 30 5 85 2.1 3.0 20 100 5 3.3 10 1
MTN7456-11C 660 Ultra Red Grey White 30 4 70 1.7 2.2 20 100 4 12.9 10 1
MTN5456-11A 700 Red Grey White 30 5 85 2.1 3.0 20 100 5 0.8 10 2
MTN2456-11A 567 Green Grey White 30 5 85 2.1 3.0 20 100 5 2.9 10 2
MTN4456R-11A 635 Hi-Eff. Red Red Red 30 5 85 2.1 3.0 20 100 5 3.3 10 2
MTN7456-11A 660 Ultra Red Grey White 30 4 70 1.7 2.2 20 100 4 12.9 10 2
Operating Temperature: -25~+85, Storage Temperature: -25~+100. Other face/epoxy colors are available.
PP
P
PP
TURESTURES
TURES
TURESTURES
O-ELECTRICAL CHARAO-ELECTRICAL CHARA
O-ELECTRICAL CHARA
O-ELECTRICAL CHARAO-ELECTRICAL CHARA
FACE COLORS MAXIMUM RATINGS OPTO-ELECTRICAL CHARACTERISTICS
SURFACE
COLOR
PART NO.
AA
CKACKA
A
CKA
AA
CKACKA
PEAK
WAVE
LENGTH
GE DIMENSIONS GE DIMENSIONS
GE DIMENSIONS
GE DIMENSIONS GE DIMENSIONS
(nm)
EMITTED
COLOR
CTERISTICS (TCTERISTICS (T
CTERISTICS (T
CTERISTICS (TCTERISTICS (T
EPOXY
COLORIF(mA)VR(V)PD(mW)
AND PIN FUNCTIONSAND PIN FUNCTIONS
AND PIN FUNCTIONS
AND PIN FUNCTIONSAND PIN FUNCTIONS
VF(V) IR(µA) IV(mcd)
typ. max. @mA max. @VR
a = 25°C)a = 25°C)
a = 25°C)
a = 25°C)a = 25°C)
typ. per
seg.
@mA
PINOUT
PINOUT 1 PINOUT 2
COMMON CATHODE COMMON ANODE
PIN NO. FUNCTION PIN NO. FUNCTION
1. ANODE E 1. CATHODE E
2. ANODE D 2. CATHODE D
3. ANODE DP 3. CATHODE DP
4. ANODE C 4. CATHODE C
5. ANODE G 5. CATHODE G
6. COMMON CATHODE D4 6. COMMON ANODE D4
7. ANODE B 7. CATHODE B
8. COMMON CATHODE D3 8. COMMON ANODE D3
9. COMMON CATHODE D2 9. COMMON ANODE D2
10. ANODE F 10. CATHODE F
11. ANODE A 11. CATHODE A
12. COMMON CATHODE D1 12. COMMON ANODE D1
1. ALL DIMENSIONS ARE IN mm, TOLERANCE IS ±0.25mm UNLESS OTHERWISE SPECIFIED.
2. THE SLOPE ANGLE OF ANY PIN MAY BE ±5.0° MAX.
marktech
optoelectronics
For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change.
430
Toll Free: (800) 98-4LEDS
120 Broadway • Menands, New York 12204
• Fax: (518) 432-7454
Loading...