Marks & Spencer MS2275F User Manual

Download

LCD digital colour TV

MS2275F

USER GUIDE

LCD Screen

Although the LCD screen is made with high-precision technology and

99.99% or more of the pixels are effective, black dots may appear or

bright points of light (red, blue or green) may appear constantly on the

LCD screen and is not a malfunction.

HELP

If you have any problem setting up this Television, trouble getting a

signal or difficulties with the operation of the DVD player.

Please Contact our Helpline where we will be able to assist you.

Call 0845 6710665

Caution

3 4

4 5-6 7-9 10 10-11 12 13 13 14 15-16

17 18-20

Safety Information

Unit and Accessories Getting Started

Front View Rear View

Remote Control Key Functions Menu Operation

Basic TV operation PICTURE menu options SOUND menu options TIMER menu options FUNCTION menu options SETUP menu options

DVD operation

DVD System Operation Disc care21

22 23

SimpleTroubleshooting Techincal Specifications

caution

Caution

The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons.

The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Correct disposal of this Product

“Correct Disposal of Product” Produced after 13 August 2005. Waste electrical should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

This unit is a “CLASS 1” laser product. This product uses a visible laser beam which could cause hazardous radiation exposure. Ensure the recorder is operated as instructed. Do not remove any covers or look into the DVD drawer opening whilst power is applied. Do NOT modify or adjust any controls that may affect laser emissions. Should the appliance become faulty consult a qualified technician.

This appliance complies with European Safety and Electrical directives

Safety Information

To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below.

Electrical safety

x The TV set should only be connected to a mains supply which matches that stated on

the label on the mains adaptor

x To prevent overload, don't share the same mains supply socket with too many other

items of equipment.

- Do not place any connecting wires where they may be stepped on or tripped over.

- Do not place heavy items, which may damage the leads, on them.

- Hold the Mains plug, not the wires, when removing from a socket.

- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial (if outdoor) and mains adaptor from the supply.

- Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet or moist areas such as Bathrooms, steamy kitchens or near swimming pools.

x Pull the plug out immediately, and seek professional help if:

- the mains plug or cable is damaged

- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture

- anything accidentally penetrates the ventilation slots

- the set doesn't work normally.

- Do NOT remove the safety covers. There are no user serviceable parts inside. You may invalidate the warranty. Qualified personnel must only service this apparatus.

- To avoid battery leakage, remove exhausted batteries from the remote control handset, or when not using for a long period.

- Do NOT break open or throw exhausted batteries on a fire.

Physical safety

x Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet,

but ensure at least 5cm (2") clearance all around.

x Do NOT tap or shake the TV screen, you may damage the internal circuits. Take good

care of the remote control, do not drop.

x To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For

stubborn stains, you may use a damp soft cloth with dilute detergent.

Unit and Accessories

TV/Radio

Source

Quick

Help

Start

Guide

Pic Swap

InfoExit

TV set

Power cable

VOL

Picture Sound

SD1

123

456

ghi jkl mno

789

pqrs tuv wxyz

SUB TXT

DVD Menu

SD2

abc def

Recording Lists

+Day

-Day

Batteries

USER GUIDE

EASY START GUIDE

Getting Started

Please insert a 12cm disc according to the Label.

(IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby) LED Indicator: Press POWER to turn on and off,

Indicator on(RED) Standby mode Indicator on(GREEN) Power on mode

VOL CH

TV/AV

Press to skip through the channels.

Press to display the input source menu(see page 11).

PLAY: Play / Pause the disc playing. EJECT: Eject the disc.

Power

Getting Started

DVD

Power ON/OFF

COAX

out

Output to

Audio amplifier

Common Interface

Satellite Box or Blue Ray DVD

TV Signal

REAR CONNECTIONS

Name Function Description

Getting Started

AC POWER IN

HDMI

VGA IN

SCART

S-Video IN

Video IN

(AUDIO)L/R IN

PC Audio IN

Headphone

COAX out

Connect to power supply

Connect to the HDMI of your DVD or other equipment

VGA signal from computer output

Connect to the composite terminal of your DVD/VCR

S-Video signal input

Video signal input

Audio signal input for AV

PC audio input

Connect it to your headphone or other audio equipment

Connect to antenna or cable source

Output to Audio amplifier

100mm

THE TELEVISION MANUFACTURER RECOMMENDS THE USE OF AN OUTDOOR AERIAL SUITABLE FOR RECEPTION OF DIGITAL BROADCASTS

Remote Control Key Functions

Menu Operation

Basic TV operation

TURN ON LCD TV

1.Connect power cable to mains supply and turn on the power by using the “ Switch” at the back the TV on the right hand side. The standby indicator on the front of the TV will light up in red.

2. Press the turn on the TV, the indicator will light green.

TURN OFF LCD TV

Press the the TV off into standby mode, the indicator will light red.

NOTE: When you initially use the TV, you will see the “First Time Installation” menu as below:

Ensure that the aerial is plugged in to the TV, Make sure your Remote is in TV mode (by pressing button), switch on the TV by pressing . You will see the first time installation menu.

POWER button on the top of the TV or the button on the remote control to

POWER button on the top of the TV or the button on the remote control to turn

First time installation

Press the button on the remote control to start the tuning procedure. This process will find all available ATV and DTV channels and store them.

By pressing the Quick Start button the first time installation can be recalled at any time.

1. Press VOL+/- to adjust the volume.

2. If you want to switch the sound OFF, press the MUTE

3. You can cancel this function by pressing MUTE or VOL+ button.

1. Using the CH+/- on the front panel or on the remote control.

Press CH+ to increase channel number

Press CH- to decrease channel number.

2. TV (ATV only) Using 0-9 digital buttons and -/-- button

Press -/-- button, then the screen will display “-”, press again it will become “- -”. When it displays “_” press a number from 0 – 9 to activate the chosen channel.

When it displays “_ _” press two numbers: for example 2 and 3 to activate channel 23.

3. DTV using only 0-9 to select channel

for example: Channel 83 press buttons 8 and 3

Press the MENU button to display the main menu.

Use

Picture Mode

Contrast

Brightness

Color

Sharpness

Colour temperature

/ buttons to select menu, and press button to enter the menu.

PICTURE

Select

Sleep Timer

OSD Timer

Enter

Personal

Normal

TIMER

Select

Volume

Sound Mode

Bass

Treble

Balance

0 Min

30Sec

Enter

SOUND

Select

Enter

Language

Video Size

Blue Screen

Child Lock

First Time Installation

Reset

Music

FUNCTION

Select

Country

Auto tuning

Manual tuning

Program Edit

Common interface

English

Auto

Enter

SETUP

Select

- You should operate the menu according to the hint on the bottom of the OSD menu.

- The CH+ and CH- buttons on the TV set are used as ɼ and ɽ

buttons on the OSD

menu.

- The VOL+ and VOL- buttons on the TV set are used as ɺ and ɻbuttons on the OSD menu.

Enter

You can display the input source menu by pressing the Source button on the remote control or the TV/AV button on the TV,

press

/ button

to select, and press OK button to confirm.

DTV

SCART

CVBS

S-VIDEO

VGA

HDMI

DVD

In this manual, the OSD (On Screen Display) may be different from your TV's because it is just example to help the TV operation.

PICTURE menu options

Press the MENU button on the top of your tv or the MENU button on the remote control then use / button to select the picture menu, press to enter the menu. (see picture below).

Picture Mode

Contrast

Brightness

Colour

Sharpness

Colour temperature

DNR

PICTURE

Select

Adjust

Personal

Normal

Off

1. Use / button to select what you want to adjust in the Picture menu.

2. Press

/ button to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Picture Mode

Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in Picture menu. You may select the picture mode directly by pressing the PICTURE button on the remote control.

Contrast

Adjust the contrast of the picture.

Brightness

Adjust the brightness of the picture.

Colour

Adjust the colour of the picture.

NOTE: This option is invalid in PC mode, and it will be shown in gray.

Sharpness

Select sharpness mode of the picture.

Colour Temperature(in VGA mode)

Select an optimum color temperature mode to suit your eyes for viewing among Normal, Warm and Cold.

DNR

If the broadcast signal received is weak, you can select the DNR option to reduce the video noise level between Off, Low, Mid and High.

SOUND menu options

Press the MENU button on the top of your tv or the MENU button on the remote control then use / button to select the sound menu, press to enter the menu. (see picture below).

Volume

Sound Mode

Bass

Treble

Balance

SOUND

Select

Music

Adjust

1. Use / button to select what you want to adjust in the Sound menu.

2. Press

/ button to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Volume

Adjust the volume.

Sound Mode

Select the type of sound which best corresponds to your listening requirements by selecting Sound Mode in Sound menu. You may select the Sound mode directly by pressing the SOUND button on the remote control.

Bass

Adjust the level of the lower-pitched sounds.

Treble

Adjust the level of the higher-pitched sounds.

Balance

Adjust the audio output between left and right speakers.

NOTE: The Treble and bass levels can only be adjusted when the sound setting Personal is selected.

TIMER menu options

Press the MENU button on the top of your tv or the MENU button on the remote control then use button to select the Timer menu, press to enter the menu. (see picture below).

Sleep Timer

OSD Timer

TIMER

0 Min

30Sec

1. Use adjust in the Timer menu.

2. Press

/ button to select what you want to

/ button to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Select

Adjust

Sleep Timer

Select the sleep time to put automatically the TV in standby mode. Timer can be selected as 15,30,45,60, 75,90,105,120 and 0 Min(Off). You may select the sleep time by pressing SLEEP repeatedly.

OSD Timer

You can select the time when the OSD display on the screen such as: 5Sec,10Sec,15Sec,20Sec,25Sec, 30Sec.

FUNCTION menu options

Press the MENU button on the top of your tv or the MENU button on the remote control then use / button to select the Function menu, press to enter the menu. (see picture below) .

Language

Video Size

Blue Screen

Child Lock

First Time Installation

Reset

FUNCTION

Select

English

Full Screen

Adjust

1. Use / button to select what you want to adjust in the Function menu.

2. Press

/ button to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Language

Select the language of the OSD menu.

Video Size

Select the screen display mode. Note: The available aspect modes may differ from one input source to another.

Blue Screen

To turn on/off the function, when the function is turned on, the screen background will turn blue at very weak or no signal condition.

Child Lock

Press

button to enter the Child Lock menu as below: Child Lock: Turn on/off the child lock function. Key Lock: This option allows you to lock the buttons on

Child Lock

Key Lock

Change PIN Code

Child Lock

Off

the TV set, so that a child may not accidentally change your viewing preferences.

Select

Adjust

Change PIN Code: Set pin code.

Old PIN Code: The default is no password, press OK to confirm. If the Pin code has been changed you must enter the present code. New PIN Code: Enter the new password.

Old PIN Code

New PIN Code

Enter Again

Change PIN Code

Enter Again: Enter the new password and press

OK to complete the change.

Select

Delete Input Confirm

0 9OK

PIN Code:

Delete Input Enter

0 9OK

If you turn on the Child Lock function, and set the PIN Code, you have to enter the program edit option in Menu Setup (page 15) to lock one or more channels. If the quick start button is pressed you will also be prompted for the child lock Password.

Note: If the pin code is changed and the number forgotten or lost, please call the helpline.

Reset

Press

button to reset the setup.

SETUP menu options

(used in TV/DTV source)

Press the MENU button on the top of your tv or the MENU button on the remote control then use / button to select the setup menu, press

to enter the menu. (see picture below).

Country

Auto Tuning

Manual Tuning

Program Edit

Common Interface

SETUP

Select

Adjust

1. Use / button to select what you want to adjust in the Setup menu.

2. Press

/ button to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Country

This option allows you to select the country.

Auto Tuning

Press

button to start auto tuning.

Note: Before you perform Auto Tuning, you must choose the country where you are by selecting COUNTRY option.

Auto tuning

Press OK key to start

Enter

Return

Manual Tuning

Note: Before you perform Manual Tuning, you must choose the country where you are by selecting Country option.

Manual Tuning in TV mode

Manual Tuning

Program

Sound System

Colour System

Program Lable

AFT

Manual Search

Select

Adjust

0-9

PAL

Off

471.43MHz

Input

Program: Select the current channel. Sound System: Select a corresponding sound system(In the UK select Pal I ). Color System: Select a corresponding color system. Program Label: Name the current channel, you can also rename the program which you have named. Press

button to enter, and press / button to select the position, then press /

button or 0-9 button to enter the character, press OK button to confirm.

AFT: Due to weak signals or a wrong antenna configuration, some of the channels may not be turned to the best reception condition. AFT function allows you to fine tune channel selected. Manual Search: Press

/ button to search.

Manual Tuning in DTV mode

Manual Tuning

Channel

Start Search

Service Found

Signal Quality

Signal Strength

Frequency

Select

Enter

474.00MHz

Channel: Select the current channel. Start Search: press

button to begin searching, and it will display “Search”, after a few second,

it will display “Finished”.

Program Edit

Begin

Favorite(in DTV mode): Set favorite channels.(You could use the

FAV button to view the favorite channels in DTV

source.)

Use

/ button to select the channel, and press

the green button on the remote control to set, and there

will be a “ ” on the channel, press the green button again

to cancel. Such as channel 2.

Delete: Delete the channel, the channel will be deleted.

Lock: Lock the channel, you have to enter the code(PIN code in

Flags

Channel list

1.BBC1

2.BBC2

3.ITV1

4.CHANNEL 4

5.FIVE

6. ITV2

7.BBC3

Child Lock menu--Function menu) to view the channel.

/ button to select the channel, and press the

Favorite Delete Lock

Use

blue button on the remote control to set, and there will be a

“ ” on the channel, press the blue button again to cancel.

Such as channel 5 and 6.

Common interface(For DTV mode)

Please contact your "Pay per View" provider e.g. Setanta who can supply a viewing card and cam unit and instructions for their use.

DVD Operation

Turn on your TV then use the Source button on the remote control or the TV /AV button on the TV to

select

DVD mode. If there is no disc in the DVD players the screen will show “NO DISC”..

Place a disc

Insert a disc according to the instruction label next to the dvd insert slot. Do not touch the playing surface.

Hold the disc around the outside with your fingers and place the disc into the slot. The player will automatically draw the disc into the player. To "Eject" the disc, press the " " button on the TV or on the remote control.

Play

The contents of each disc vary, as to how the disc was authored and what features are included. Some discs start playing as soon as they have been read, some need "Play" selecting in the Menu. Different play modes are offered, such as Menu Play, Sequence Play and other modes.

Using the INFO Feature

1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc discs.

2. Loading and playing DVDs (two pages)

- Press INFO button once to show the first page:

- "Disc Type, Title * / * (the playing title / total titles), Chapter * / * (the playing chapter / total chapters), Elapsed Time of the Disc".

- Press the button again to show the second page:

- "Language */* (the serial number of playing language / the amount of optional languages) or Off, Language Type, Audio Type, Subtitle * / * (the serial number of playing subtitle /the amount of optional subtitles) or Off, Angle * / * (the serial number of playing angle / the amount of optional angles) or Off".

- Press the button for the third time, the INFO menu fades out.

3. Loading and playing SVCD discs (two pages)

- Press INFO button once to show the first page:

- "Disc Type, Track * / * (the playing track / total tracks), Mute, PBC, Repeat Mode, Elapsed Time of the Playing Track".

- Press the button again to show the second page:

- "Language * / * (the serial number of playing language/ the amount of optional languages) or Off, Language Type, Audio Type, Subtitle * / * (the serial number of playing subtitle / the amount of optional subtitles) or Off".

- Press the button for the third time, the INFO menu fades out.

4. Loading and playing VCD

- Press INFO button once to show the first page:

- "Disc Type, Track * / * (the playing track / total tracks), Mute, PBC, Repeat Mode, Elapsed Time of the Playing Track".

- Press the button again, the INFO menu fades out.

5. Loading and playing CD, HD-CD, WMA, Digital Audio / JPEG discs

- Press INFO button once to show the first page:

- "Disc Type, Track * / * (the playing track / total tracks), Mute, Repeat Mode, Elapsed Time of the

Playing Track".

- Press the button again, the INFO menu fades out.

Subtitles

1. Compatible with DVD, SVCD discs.

2. Press the Subtitle button on the remote once, and the subtitle info banner appears

3. When a DVD or SVCD is recorded with subtitles, you can use the Subtitle feature to view the subtitles

on-screen. By default, subtitles are off. The info banner will display Subtitle Off.

4. To display subtitles, press the Subtitle button again. The default language with its responding serial

number will be displayed in the info banner and subtitles will be displayed in that language. There are 8 supported subtitles: Chinese, English, Japanese, French, Spanish, Portuguese, Germany and Latin. With each consecutive press of the Subtitle button, the subtitle switches. For example, "Language Icon: [1 English DTS 6CH] or [Off]" (the availability of the subtitles are disc-dependent). To turn subtitles off, press the Subtitle button until Subtitle Off is displayed.

DVD System Operation

Digital Audio Disc

1. Compatible with Digital Audio discs

2. The player will search the disc directory automatically and display the contents on screen.

3. The player will then start to play the first track, of the selected directory.

4. To change directories use the direction buttons.

DVD System Operation

System operation will define the setting of the set; these definitions will be stored until you change them again.

General Steps of Setup Menu

Pause or Stop the player. Press MENU button on the remote control and select SETUP menu as below, then select DVD SETUP item, press button to enter the DVD main menu as below.

SETUP

DVD SETUP

Select

Adjust

2. Press the

/ buttons to select the Icon of the desired section, e.g. “TV System" and press

button to open that section.

3. Press

4. Press 5 To exit the menu, press or

/ to select the desired feature and again press button to open that section.

/ to select the desired feature and then press "OK" to select the new setting.

to select EXIT SETUP and then press "OK"

When launching the setup routine, the pressing of the following buttons will turn off the setup menu, while the choices that have been changed will be saved.

Menu specification

1. SYSTEM SETUP

The system setup options are illustrated below:

DVD System Operation

TV SYSTEM According to the Color system of your TV, select proper TV TYPE. PASSWORD The password option is initialized as locked. You cannot set the ratings limit or change the password. To enable these features you must unlock the Password. The default password is "0000". Using the button, move the highlight to "PASSWORD", press the button and enter "0000". You will see the padlock symbol open. You may now change the RATING or put in a new password number. If the Lock symbol is BLUE you must press the to YELLOW, you may now enter a new 4 digit number. Please remember or write down the new Password and keep safe.

RATING The Rating feature is a rating limit feature, like movie ratings. This helps you to control what DVD the family watches. There are 8 levels of selection, from KIDS SAFE to ADULT. Adult is the "play all" selection.

button to enter the lock field, the lock symbol will change

2. LANGUAGE SETUP

The language setup options are illustrated below:

- OSD LANGUAGE: The OSD will display in the language you choose.

- AUDIO LANG: If the disc you are playing has the language you choose, it will

output audio in that language.

- SUBTITLE LANG: If the disc you are playing has the language you require you may select this either in

the Menu or using the "SUBTITLE" button on the Remote control. You may also switch this OFF.

- MENU LANG: If the disc you are playing has the language you require you may

select this.

3. AUDIO SETUP

-Highlight the AUDIO OUT option, and press the buttons to choose the audio output mode you prefer. Press OK to confirm; There are 3 optional audio output modes: SPDIF /OFF, SPDIF / RAW, and SPDIF/ PCM. SPDIF/ RAW is for amplifiers with a built in digital decoder. SPDIF/PCM is selected for amplifiers with no built in digital decoder.

-TONE: Use the

//button to move the scroll and adjust the tone.

4. DIGITAL SETUP

The video setup options are illustrated below:

- DYNAMIC RANGE: Use the move the scroll and adjust the dynamic range.

- DUAL MONO: Choose the mode of the audio output.

- There are four modes: STEREO, MONO L, MONO R,

MIX MONO.

/ button to

DVD System Operation

Disc Care

About Disc Terms

Title

Generally, pictures or music compressed on a DVD are divided into several sections, "title".

Chapter

The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered for easy searching, but some discs may not have a recording chapter.

Track

A segment of picture or music on a CD, Each track is numbered for searching.

Care of Disc

Video disc contains high-density compressed data that needs proper handling.

1. Hold the disc with fingers by outer edge and/or the center spindle hole. Do not touch the discs

2. Do not bend or press the disc.

3. Do not expose the disc to direct sunlight or heating sources, Stere discs in cabinet vertically, and in dry condition.

surface.

Prevent exposure to: Direct sunlight Heat or exhaust from a heating device Extreme humidity Clean the disc surface with a soft, dry cleaning cloth, Wipe the disc surface gently and radically from center toward the outer edge. Do not apply thinner, alcohol, chemical permanently damage the disc surface.

solvent, or sprays when cleaning. Such cleaning fluids will

TSimple roubleshooting

Simple Troubleshooting

If the display or performance fails check the TV in accordance with the following instructions. If the TV still fails to function correctly contact your dealer for assistance.

SYMPTOM REMEDY

GENERAL

Dead. No LED Lit No power to the TV.

Dead Led lit red Set still in standby.

No signal.

Blue screen.

Noisy, snowy,

ghosting picture

No sound

Remote control does not work

Will not accept disc DVD not selected

Screen shows "NO

DISC"

Picture "Freezes" or breaks up

Certain disc functions

not working.

(TV)

Incorrect source selected.

Poor aerial signal.

Sound "Mute".

Volume set too low.

External leads not

connected "if used".

Remote are not in the correct status

Disc placed incorrectly

Disc damaged or dirty

Disc damaged or dirty.

Disc may not support required

feature.

Check all connections to the TV.

Press either the Power button or on the Remote control.

Press Source button to select correct source.

If using an indoor aerial, try moving the

aerial. Check aerial connections.

Turn sound "Mute" OFF.

Check volume settings.

Check all external leads are connected.

Ensure remote is in TV mode by pressing TV button.

DVD

Select DVD mode with Source button.

Disc must have mirror side facing you if single sided.

Inspect disc. If damaged you must discard. If dirty see "Disc care" page 21.

See "Disc care" page

Read disc information.

21.

Techincal Specifications

TVSystem PAL/SECAM, BG/DK/I Screen size 22"(diagonal) Resolution 1920x1080 pixels Aerial input 75 Audio output power

Remote control

2x6 W

AC 100-240V 50/60Hz 60WPower Consumption

5.06kgWeight

(unbalanced)

Type Control distance Control angle Batteries Dimensions Weight

infrared 5m 30° (horizontal) 2 x 1.5 V, size AA 48 x 168 x24 mm 70 g (without battery)

Please retain proof of purchase in case of return. In the unlikely event of a fault please contatct our customer service helpline on 0845 671 0665, who will advise you of the best course of action.

This may be to return it with original packaging to any M&S store (except Outlets and Simply Food stores) along with your receipt. If it’s within 35 days of purchase we will offer an exchange for a new product or a full refund. After 35 days and for the remainder of the guarantee period, we will arrange for the product to be repaired.

Once the tamperproof seal on your technology product is broken, refunds can only be given in accordance with your legal rights. Remember you are not entitled to a refund if you simply change your mind, or if you damage the goods after you buy them.

Should a repair not be possible, we will exchange the product for a new or nearest equivalent product. In the unlikely event of being unable to exchange, we will offer a full refund.

This warranty is only valid within the United Kingdom, Republic of Ireland and/or Channel Islands. This warranty excludes faults caused by accident, neglect, misuse, not following the instructions or normal wear and tear.

This warranty is in addition to your legal rights and supersedes any guarantee or warranty that is with the product.

T04/9350/1954N

(copyright) Marks & Spencer plc Marks and Spencer plc PO Box 3339 Chester CH99 9QS

W2 1NW (England www

M&Stechnologycustomerservice

Registered No:

andWales)

.marksandspencer.com

214436

Tel 0845 671 0665

Marks & Spencer MS2275F User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual