Marks & Spencer MS19112F-LED User Manual

LED digital colour TV

USER GUIDE

MS19112F-LED

Introduction

Thank you for purchasing this TV which has been designed and manufactured to give you many years of trouble free service.

You may already be familiar with using a similar product but please take time to read these instructions which have been written to ensure you get the very best from your purchase.

HDMI

HDMI (High Definition Multimedia Interface) is the next generation of digital interface. Unlike conventional connections, it transmits uncompressed digital and audio signals using a single cable. This TV supports high-definition video input via the HDMI socket on the back of the TV.

Safety is important

To ensure your safety and the safety of others, please read the safety precautions BEFORE you operate this product.

Contents

You will find the following

v TV v User Guide v Quick Start Guide v Remote Control v 2 x AA Batteries

NOTE: If any of the items listed are damaged or missing please contact our

technical helpline on 0845 671 0665

Remote Control Aerial connection

Connecting external devices Common Interface slot Auto installation setup Source menu Menu settings

8-11

Unit and Accessories6-7

12 13-17 18

19 19 20-27

Multimedia Operation Recording Operation

28-30 31-33

EPG menu

DVD Operation

35-42

3-5

Contents

SimpleTroubleshooting

Technical Specifications

Wall Mounting

Safety Information

Contents

Introduction

SAFETY INFORMATION

CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER SCREWS, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that there are important operating maintenance instructions in the literature accompanying this unit.

IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE.

Take note of the following safety information which appears on the back of the TV.

present within this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is

Keep these instructions

• Do not use this TV near water.

• Clean only with a slightly damp cloth.

• Do not block any ventilation openings.

• Install in accordance with the supplied Quick Start Guide and this User Guide.

• Protect the power chord from being walked on or pinched, particularly at plugs, and the point where it exits from the TV.

• Do not allow the power chord to overhang the edge of a table.

• Unplug this TV during lightening storms or when unused for long periods of time.

WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS TV TO RAIN OR MOISTURE. THE TV MUST NOT BE EXPOSED TO DRIPPING AND SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON THE TV.

NOTE: No naked flames such as candles should be placed on the TV.

IMPORTANT SAFETY INFORMATION (Continued)

This unit has been produced according to all current safety regulations. The following safety tips should safeguard users against careless use and the dangers connected with such use.

Although this appliance has been carefully manufactured and rigorously checked

prior leaving the factory, as with all electrical appliances it is possible for problems to develop. If you notice smoke, an excessive build up of heat or any other unexpected phenomena, you should disconnect the plug from the mains power socket immediately.

Ensure that the unit is sufficiently ventilated! Never place next to or underneath

curtains! The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operarble.

This set should only be connected to a mains power supply which matches that

stated on the label on the rear of the TV – do not attempt to connect it to any other

type of supply. The socket – outlet must be installed near the equipment and easily accessible. To prevent overload, don’t share the same mains supply socket with too many other

items of equipment. Apparatus with Class 1 construction shall be connected to a mains socket outlet with

a protective earthing connection.

Keep away from rodents. Rodents enjoy biting into electric flexes. Always hold the plug when pulling out the plug from the mains supply socket. Do not

pull on the flex, the flex can become overloaded and cause a short circuit.

Set up the unit so that no one is able to trip over the flex. Do not place heavy items on the flex, which may damage it. Take note that the flex cannot be reached and pulled by young children, avoiding

injury.

Do not set up the unit near to heat sources. The casing and the flex could be

damaged by the impact of heat.

The screen is made of plastic and can break if damage is done to it. Be careful when

collecting sharp edged plastic splinters to avoid injury.

Avoid placing the unit on any surfaces that may be subject to vibrations or shocks. To protect the unit during a thunderstorm unplug the AC power cable and disconnect

the aerial. Caution: Do not touch the aerial (RF) connector.

When you leave your home for long periods of time, unplug the AC power cable for

safety reasons.

The unit becomes warm when in operation. Do not place any covers or blankets on

the unit in order to prevent overheating. The ventilation holes are not to be blocked. Do not set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 5 cm (2”) free space around the whole unit.

Do not allow water or moisture to enter the TV. Do NOT use in wet or moist areas

such as Bathrooms, steamy kitchens or near swimming pools.

Do not use this unit when moisture condensation may occur

Any repairs must be carried out by qualified personnel only. Do not open this unit. A non – expert attempting to repair the unit could be dangerous

and potentially cause a fire hazard.

IMPORTANT SAFETY INFORMATION (continued)

Liquids spilt into the unit can cause serious damage. Switch the set OFF and

disconnect the mains power supply, then consult a qualified service person before

attempting to use the unit again. Do NOT remove the safety covers. There are no useable or serviceable parts inside.

You may invalidate the warranty. Qualified personnel must only service this

apperatus. Do NOT tap or shake the screen, you may damage the internal circuits. Take good

care of the remote control, do not drop. Never place hot objects or open flame sources on or close to the TV. High temperatures can melt plastic and lead to fires.

Where to install

Locate the television away from direct sunlight and strong lights, soft indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a sturdy platform of which the surface should be flat and steady. This will prevent it from falling over. Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen, and so that small objects cannot be inserted into the ventilation slots or openings in the cabinet.

LED Screen

The LED display panels are manufactured using an extremely high level of precision technology, however sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of malfunction.

Headphone Warning

Loud music can damage your hearing irreversibly, therefore do not set the volume to a high level when listening through headphones, particularly for lengthy listening periods.

To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For

stubborn stains, you may use a damp cloth with dilute detergent.

Unit and Accessories

The functions of the TV buttons are described below.

Remote Control Window (keep clear)

LED Indicator

: Eject

: Pause/Play

The functions of the DVD buttons are described below.

Menu :Press to display the OSD menu, press again to exit the menu.

Vol +/- : Press to adjust the volume.

CH+/- : Press to skip through the channels.

Input : Press to display the input source menu.

Power : Turn ON/OFF the TV set.

Insert disc according to the label next to the disc slot

Unit and Accessories (continued)

lortnoC etomeRtes VT

Batteries

USER GUIDE

QUICK START GUIDE

User GuideQuick Start Guide

Power cable

Mains adaptor

Dependant on the model of theTV some keys will have no function

Remote control

Functions of remote control buttons

Power switch

Turn on or standby.

DTV ATV SCART YPbPr DVD PC HDMI AV USB

TV SETTINGS

EXTRAS

LOCK

OPTIONS

Dependant on the Model of the TV some keys will have no function

Remote control (continued)

key

Dependant on the model of TV some keys will have no function

Remote control (continued)

Installing Batteries in the Remote Control

1. Remove the battery compartment cover at the rear of the remote control by pushing the retaining clip forward and pulling up.

2. Install the supplied batteries, ensuring the polarity matches what is shown in the battery compartment.

3. Replace the battery compartment cover.

Using the Remote Control

To use the remote control point it at the TV and press the required buttons. You must be within 6 meters and at an angle of less than 30 degrees from the center of the TV.

NOTE: Sunshine or other strong light sources may interfere with the signal from the remote control. In this situation turn the TV away from the light source.

WARNING! DO NOT LEAVE BATTERIES IN THE REMOTE CONTROL FOR EXTENDED PERIODS AS THEY CAN LEAK OR CORRODE CAUSING DAMAGE TO THE REMOTE CONTROL. CHECK THEM PERIODICALLY AND REPLACE THEM AS REQUIRED.

WARNING! DO NOT MIX BATTERY TYPES. WHEN INSERTING BATTERIES, REPLACE ALL BATTERIES AT THE SAME TIME. DO NOT MIX OLD AND NEW BATTERIES.

WARNING! EXHAUSTED BATTERIES MUST BE TREATED WITH CARE AND DISPOSED OF ACCORDING TO ANY SAFETY OR RECYCLING REGULATIONS IN FORCE IN YOUR LOCAL AREA, NEVER DISPOSE OF BATTERIES INTO GENERAL WASTE, OR FIRE.

WARNING! NEVER EXPOSE BATTERIES TO EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE.

Aerial connection

WARNING! ENSURE THE TV AND ALL ANCILLARY EQUIPMENT IS UNPLUGGED FROM THE MAINS BEFORE MAKING ANY CONNECTIONS!

Connecting the TV Antenna

Connect the TV Antenna to the aerial socket with a 75 ohm co-axial plug. For best results use a high gain TV aerial, preferably roof or loft mounted.

To improve picture quality in a poor signal area, purchase

and install a signal amplifier.

If the antenna needs to be split for two TVs, use a 2-Way

Signal Splitter (not supplied).

Connecting external devices

This instruction manual shows the simplest and most effective way of

connecting your TV to ancillary equipment. Alternate methods are listed below.

HDMI Lead You can connect this TV to a compatible device using a HDMI lead. This method will give the best picture.

Connect the cable from the HDMI equipment to the TV HDMI socket.

SCART Lead

You can connect this TV to a compatible device using a SCART lead. The connection uses component video signals,

i.e. the red, green and blue (RGB)

content of the video are sent on separate signals.

VGA Cable

You can use your TV as a monitor for your personal computer by using a VGA cable. Sound from your personal computer may also be played through the TV.

YPbPr

Video

COAX

Common Interface

Connecting external devices (continued)

POWER

YPbPr

COAX

Common Inter face

Headphone out

PC-IN

USB

Video

Mini AV cable

Mini YPbPr cable

CONNECTIONS

Caution:

Before connecting external devices:

Make sure to disconnect the appliances from the power supply in order to avoid any potential damage from occurring. Make sure to establish the required connection. Make sure that the connectors are properly and correctly attached before connecting the appliances to the power supply.

Connecting external devices (continued)

Name Function Description

VGA Connect to the PC VGA output to display PC graphics

Connect to the Audio/Video output of external devicesMINI AV

POWER Connect to power supply

Connect to the scart input / output of external devicesSCART

Connect to USB device for multimediaUSB

HDMI Connect to the HDMI socket of your DVD or Satellite Box

MINI YPbPr

PC audio in PC audio input

Headphone

Connect Headphone

Connect to antenna or cable source

CI slot (pay as you view card slot)

COAX

Output to audio amplifier

Connect to the YPbPr output on external devices

PC connection

As PCs are sometimes still supplied with a ‘conventional’ CRT monitor, you may need to adjust the display settings of your PCs graphics card, otherwise the pictures may not appear correctly. Switch on your PC (still with your original monitor connected) now select the screen resolution, and select 60Hz refresh rate. Switch off your PC, then connect it to your TV while both appliances are still switched off.

VGA, HDMI PC Connection

Use a PC-VGA cable (not supplied) to connect the TV to your PC. You can also use an HDMI cable to connect to your PC (if your PC Graphic card supports HDMI). When the HDMI cable is used, the PC audio cable is no longer required. If you use the HDMI to DVI cable, you will need to use the PC audio cable. Connect all cables carefully and do not bend or break the connector pins.

When using the VGA cable

Switch on the TV Switch on the PC Select PC/VGA as input source

When using the HDMI cable

Select HDMI as input source

VGA cable

Audio cable

HDMI to DVI cable

HDMI to HDMI

( All illustrated cables are not supplied)

Connecting external devices (continued)

Connecting Video camera and Video recorder

Video camera

Connect the AV cable to the TV and to the video camera. Turn on both video camera and the TV. Select AV/CVBS source You can now see the playback picture from the video camera.

Note:

To connect the video camera using other cables, refer to the video camera instruction manual.

Video recorder

nnect the Scart cable to the TV and video recorder. Turn on both video recorder and the TV. Select Scart source You can now see the playback picture from the video recorder.

Note:

To connect the video recorder using other cables, refer to the video recorder instruction manual.

Video camera

Video recorder

AV cable

Scart cable

All illustrated cables are not supplied

Connecting external devices (continued)

Connecting an audio system

Scart cable

Scart to RCA cable

(

(B)

Connecting a DVD player

Connect a DVD player using either a SCART cable or the HDMI cable. (only if your external equipment supports HDMI).

(All illustrated cables are not supplied)

When using the SCART cable

Switch on the TV Switch on the DVD player Select SCART as input source

When using the HDMI cable

Select HDMI as input source

HDMI to HDMI

SCART

All illustrated cables are not supplied)

Connecting external devices (continued)

You can supply the TV sound to the stereo system (A) with the Scart socket. Use a special scart cable SCART to RCA. (Please consult your hi-fi instructions for details). If you have a surround sound amplifier/decoder (B) Use the Scart cable or the special scart cable Scart to RCA.

USING YOUR COMMON INTERFACE SLOT

Common Interface

The Common Interface (CI) slot is designed to accept the Conditional Access Module (CAM) and Smart Card in order to view the pay TV programmes and additional services. Contact your Pay Per View TV service provider to get more information about the modules and subscriptions.

NOTE: Conditional Access Module and Smart Cards are sold separately.

WARNING! SWITCH OFF YOUR TV BEFORE ANY MODULE IS INSERTED INTO THE

COMMON INTERFACE SLOT, THEN ADD THE SMART CARD TO THE CAM.

1. Turn on the TV and ensure ‘DTV’ Source is selected.

2. If the CAM is detected the TV will display the following message on the screen. "Common Interface Module inserted" wait for a few moments until the card is activated.

3. Select the relevant digital Pay Per View channel.

4. Detailed information on the Smart Card in use is displayed

5. Press the Ok button to access the card menu. Refer to the Module Instruction Manual for setting details.

6. When the module is removed, the following message will appear on the screen. "Common Interface module removed".

USER GUIDE

Common Interface Slot

You can select the input source menu by pressing the Source button on the remote control or the INPUT button on the TV.

Source

When you initially turn on the TV you will see the first time installation menu as below:

Ensure that the aerial is plugged into the TV, Make sure your Remote is in TV mode (by pressing button), switch on the TV by pressing . You will see the first time installation menu.

Press the button on the remote control to start the tuning procedure. This process will find all available ATV and DTV channels and store them.

By pressing the Quick Start button the first time installation can be recalled at any time.

Auto installation setup

Source Menu

Power On / Off the TV

Press the power button on the LED TV or the button on the remote control, the standby indicator will light green. To turn off the LED TV Press the power button on the LED TV or the button on the remote control, the standby indicator will light red.

1. Turn the TV on.

2. Press the MENU button on the Remote Control.

3. Use the and buttons to navigate through the menu.

4. Press the EXIT button to exit the Menu.

LOCK MENU:

Allows you to set up a variety of lock and setup options.

EXTRAS MENU:

Allows you to setup a variety of time options.

TV SETTINGS MENU

Allows you to search channels and set up a variety of channel options. (Select DTV source for example)

Allows you to customize the sound options and effects.

(Select DTV source for example)

OPTIONS MENU:

Allows you to setup a variety of setup options. (Select DTV source for example)

(Select DTV source for example)

Bas c Use

Menu Settings

Colour

U K

Blue Screen

Application

Menu Settings (continued)

1. TV SETTINGS menu

Description

Auto Scan

Press the OK button to enter the menu, and select

the Country and Tuning mode for the TV, then

press OK button to start the auto tuning.

DTV Manual Tuning

Press the OK button to enter the DTV Manual Tuning menu, select a DTV channel, press the OK button to start searching.

ATV Manual Tuning Press the OK button to enter the ATV Manual Tuning menu.

Storage To: Select a position for storing the programme. System: Select a TV system for searching. Current CH: Select the channel you want to manually tune.

Search: Press / buttons to manually search.

Fine Tune: Press / buttons to fine-tune. Frequency: Displays the current frequency.

Note: Press the RED button to save your settings

Menu Settings (continued)

Programme Edit Press the OK button to enter the Programme Edit menu as below.

Signal Information Displays the digital

TV-signal information (DTV mode only).

CI Information Please contact your “pay perview” provider who can supply a viewing card and cam unit with instructions for their use.

Delete: Select a channel and press the RED button to delete it. Move:

Select an ATV channel, and press the

YELLOW button, then you use buttons to change the position of the programme, press YELLOW again to confirm the change. Press menu to exit and your new changes will be saved. (ATV mode only) Skip: Select a channel and press the BLUE button, this will label the channel. As long as the channel has a skip label it will be skipped when searching through the channels using the CH+/- buttons. Rename: Select an ATV channel and press the GREEN button to change the name of the channel by using the buttons. (ATV mode only)

Menu Settings (continued)

2. PICTURE menu

Description

Picture Mode: Choose from Standard, Dynamic, User and Mild.

Note: Contrast, Brightness, Colour and sharpness are only available and can be adjusted in

the User mode option in the Picture Mode Settings.

Contrast: Controls the difference between the brightest and darkest regions of the picture.

Brightness: Controls the overall brightness of the picture.

Colour: Control the colour.

Sharpness: Increase this setting to see crisp edges in the picture; decrease it for soft edges.

Tint: Controls the tint ( NTSC mode only).

Colour Temperature: Choose from Medium, Cool, User and Warm.

Red: Controls the red colour of the picture.

Green: Controls the green colour of the picture.

Blue: Controls the blue colour of the picture.

Aspect Ratio: Choose from 4:3, 16:9, Zoom1, Zoom2 and Panorama.

Noise Reduction: Choose interference noise modes from Off, Low, Middle, High and Default.

Colour

Application

Menu Settings (continued)

3. SOUND menu

Description

Sound Mode: Allows you to select among: Standard, Music, Movie, Sports and User.

Treble(Can be adjusted when the sound mode is set to User): Controls the relative intensity of

higher pitched sounds.

Bass (Can be adjusted when the sound mode is set to User): Controls the relative intensity of

lower pitched sounds.

Balance: To adjust the balance of the left and right speakers audio output, or turn off the volume

of the left or right speaker.

Auto Volume: This feature automatically adjusts the audio level when the TV is turned on.

This function is activated by selecting “On”.

Surround Sound: Turn on / off the surround sound function by selecting “On” or “Off”.

Menu Settings (continued)

Sleep Timer: Allows you to setup the sleep timer: 10min, 20min, 30min, 60min, 90min,

120min,180min, 240min and off.

PC Setup (PC mode only) : Press the OK button to enter the submenu to adjust the

Horizontal / Vertical position or Size and Phase of the picture.

Note: The options Schedule List, Recorded List, Timer Record and PVR File System are described on pages 31 -33.

4. EXTRAS menu

Description

Menu Settings (continued)

OSD Language: Allows you to select the on screen display menu language.

Audio Language (can only be selected in DTV mode): Select the audio language.

Subtitle Language (can only be selected in DTV mode): Select the subtitle language.

Menu Time Out: Allows you to setup the length of time that the on screen display is visible: 5s, 10s, 15s, 20s, 25s, 30s, 35s, 40s.

Country: This is defaulted to UK, but can be changed by using the Auto tune function.

DVD Setup: Press the OK button to enter the DVD Setup menu (in DVD mode only).

Restore Setting: Press the OK button to restore the factory default settings.

5. OPTIONS menu

Description

U K

Blue Screen

Blue Screen: Set the screen background colour blue or not when no vaild signal input.

Menu Settings (continued)

Description

Lock System: Turn on/off the Lock System function. Note: Enter your password to operate this menu.(the default password is 0000)

Set Password: If the Password has been changed you must enter the current

password.

Lock Channel: You must enter the password to view channels that have been locked. Use and buttons to select the channel and press the GREEN button on the remote control to lock the channel.

Parental Guidance: Control your childs viewing using the Parental Guidance mode.

6. LOCK menu

Sele ct

LOCKED

Please enter old password: Enter current password. Please enter new password: Enter new password. Confirm new password: Enter new password again.

Press / / / buttons to select and the OK button to activate the file or open folder. Press

button to play the files in full screen mode. When in full screen mode press the OK button to

show the navigation option menu on the bottom of the screen or press stop button to return to files.

Select

Multimedia O eration

asic O eration

2). Insert the USB device, he name of the device will be displayed on the screen.

3). Press / button to select the files on the USB device (PHOTO, MUSIC, MOVIE, TEXT) to view or play.

1). Press the SOURCE button on the remote control to display the input source menu, select the USB source with the buttons and press the OK button to enter the Multimedia menu below.

NS N

PT S V TT

NS N

PT S V TT

Pre ie

Navigation options

Return to main menu

p Folder

n ormation o the S de ice

S de ice list

Select

Disk C:

File n ormation

. P oto

. Music

Press / buttons to select the option on the menu, and press the OK button to activate.

Repe t: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Music: Play/Pause the background music of your choice. Pl ylist: Display the playlist on the screen and select the photo of your choice.

no:Display the information of the file.

Rot te: Rotate the photo clockwise/counterclockwise.

oom n Out: Zoom In/Out of your photos.

Mo e ie : Move the photo in Zoom out mode.

Press / buttons to select the option on the menu, and press the OK button to activate. Press / buttons to select the music, and press the OK button to play.

Repe t: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Se rc : Program the music to play from the time you set.

Press the OK button to display the time table, and select the position with the buttons,

set the time using the numeral buttons on the remote, select “OK” and press the OK button to search.

Screen S er: Press the E button to enter the Screen Saver mode, press again to exit.

Photo viewing

Listen to music

Multimedi Oper tion (continued)

Zoom In

Zoom Out

Multimedi Oper tion (continued)

. Mo ie

4. Te t

Press / buttons to select the option on the menu, and press OK button to activate.

Repe t: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Set A : Select and play the preferable part of the file by setting A and B at the beginning and end. Press OK button to cancel. Pl ylist: Display the playlist on the screen.

no: Display the information of the movie file.

Slo : Play the movies at slow speed, press button to cancel and resume at normal speed. Step: Step quickly through the movie by using this option Se rc : Program the movie form the time you set.

oom In Out : Zoom In/Out of the movie screen. Aspect R tio: Select the aspect ratio of the on screen display. Mo e ie : View the film in Zoom out mode.

Press / buttons to select the option on the menu, and press the OK button to activate.

Pre e t p ge: Turn to previous/next page of the text. Pre . e t: Turn to previous/next file. Stop: Stop auto turning pages. Music: Play/pause the background music of your choice. Pl ylist: Display the playlist on the screen.

no:Display the information of the text file.

Watch a film

View text files

P R settings

Recording Oper tion

Press the MENU button, and select EXTRAS menu.

). Sc edule ist

). Recorded ist

Display the recorder schedule list.

O: Display the information of the programmes you have recorded.

RE utton: Delete the recording you select.

REC.LIST

ecor t

INFO

eete

Recording Operation (continued)

3). Timer Record

4). PVR File System

TITLE: Select the channel you want to record. MODE: Select the record mode. Start Time: Select the start recording time. End Time: Select the end recording time.

Press the OK button to save the setting and exit the menu.

there will be a hint on the screen.

Set the timer record

The TV will record the programme automatically according to your settings.

Setup the PVR File system before you start recording.

Select Disk: Select the device for the Recorded files. Check PVR File System USB Disk: Displays the USB state. Format: Format the USB device Time Shift Size: Displays the size of the USB device Speed: Displays the speed of the USB device

When you press REC button, the screen will display the recording menu as below:

Recording Oper tion (continued)

ecord and Time shi t unction uttons

1) ecording menu

) Timeshi t menu

ecording: Press to start recording.

Note: a. display and exit full mode by pressing the REC or Exit buttons. b. Press the STOP button to stop the recording and exit the recording mode.

Note: a. Display and exit the navigation menu by pressing the Exit button.

b. Press the STOP button to exit the Timeshift mode.

c. Press PLAY button to play the programme you are recording from the beginning.

) Start ecording

A SE: Press to enter the timeshift mode, press again to play the recording.

Press PAUSE button to enter the Timeshift mode, and the picture will be paused, the

recording will begin.

Sto : Press to stop recording or timeshift.

Full mode

Simple mode

isplays the list of programmes scheduled for recording.

Displays

the list of programmes already recorded on the USB

device

[-00:01:21/00:10:00]

SHIFT TIME/MAX SHIFT TIME:

Press / button to highlight the date, now press the / buttons to select the date you want to view (7 day EPG)

Press the / buttons to highlight the channel option, press / buttons to select the channel you want to view.

EP menu

You can select a programme for recording using the / buttons.

Record: Press R button to display the Recorded Mode menu, and set the timer record. When

the programme starts it will be recorded to the USB device.

Remind: Press the GREEN button to display the remind menu, and set the time. When the

programme starts the TV will automatically switch to this programme.

Sc edule: Press the YELLOW button to display the schedule list. To Top: Press the E button to return to and highlight the top of the table.

Display the programme guide by pressing the E button. Press the E button to highlight the top of the table in yellow, press the / to select

CHANNEL or TIME.

LENNAHC yb tsil emmargorPEMIT yb tsil emmargorP

Oper tion

4: P n Sc n

4: etter o

ide

Press the Power button on the TV or the remote control, and select “DVD” source by the TV/AV(SOURCE).

If there is no disc in the DVD player the screen will show "NO DISC".

Do not touch the playing surface. Hold the disc around the outside with your fingers and place the disc into the slot The player will automatically draw the disc into the player. To "Eject" the disc, press the EJECT button on the TV or the " " button on the remote control.

Insert Disc according to picture next to disc slot.

Audio

Press MENU button on the remote control and select OPTIONS menu as below, then select DVD SETUP, press the OK button to enter the DVD main menu as below.

Select the “Exit Setup” item in the General Setup menu of DVD setup menu, and press OK button to exit the DVD Setup menu.

Enter t e Setup menu

T ispl y

Eng O

OS ng Screen S er

st Memory O

E it Setup

ide

o To ener l Setup P ge

Off (Turn off the screen saver)

or the picture is

paused for a few minutes

4:3 Pan Scan 4:3 Letter Box

Wide

TV Display Wide

Eng Off

OSD Lang Screen Saver

TV Display Wide

Eng Off

OSD Lang Screen Saver

TV Display Wide

Eng Off

OSD Lang Screen Saver

ON Off

Last Memory ON Exit Setup

This setting enables you to watch the DVD from the last point it was turned off , ( for example changing the source to watch TV)

ON (Activate the last memory function) Off (Deactivate the last memory function)

English French German Spanish Italian Portuguese

Spdif Setup

Off

TV Display Wide

Eng Off

OSD Lang Screen Saver

Last Memory ON Exit Setup

In the Audio Setup page press the ( ) button to select the Speaker Setup option, then press OK on

the remote control to see the Speaker Setup options.

Set Last Memory State

Volume

You must press STOP twice to enter the Preference settings.

that

Eng Eng Eng

T System

that

T System

Multi Eng Eng Eng

Englis

renc

erm n

Sp nis

tlin

Portuguese

Multi Eng Eng Eng

Englis

renc

erm n

Sp nis

tlin Portuguese O

Multi Eng Eng Eng

Englis

renc

erm n

Sp nis

tlin

Portuguese

The user

Multi Eng Eng Eng

T System

Multi Eng Eng Eng

C nge P ss ord

The user

Multi Eng Eng Eng

T System

Disc Care

About Disc Terms

Title

Generally, pictures or music compressed on a DVD are divided into several sections, "title".

Chapter

The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered for easy searching, but some discs may not have a recording chapter.

Track

A segment of picture or music on a CD, Each track is numbered for searching.

Care of Disc

Video disc contains high-density compressed data that needs proper handling.

1. Hold the disc with fingers by outer edge and/or the center spindle hole. Do not touch the discs surface.

2. Do not bend or press the disc.

3. Do not expose the disc to direct sunlight or heating sources, Stere discs in cabinet vertically, and in dry condition.

Prevent exposure to: Direct sunlight Heat or exhaust from a heating device Extreme humidity Clean the disc surface with a soft, dry cleaning cloth, Wipe the disc surface gently and radically from center toward the outer edge. Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning. Such cleaning fluids will permanently damage the disc surface.

USER GUIDE

Simple Troubleshooting

SYMPTOM REMEDY

GENERAL

Dead. No LED Lit No power to the TV.

Check all connections to the TV.

Dead Led lit red Set still in standby.

Press either the Power button or on the Remote

control.

No signal.

Blue screen.

Incorrect source selected.

Press Source button to select correct source.

Noisy, snowy,

ghosting picture

(TV)

Poor aerial signal.

If using an indoor aerial, try moving the

aerial. Check aerial connections.

Volume set too low.

Check volume settings.

No sound

External leads not connected "if used".

Check all external leads are connected.

DVD

Will not accept disc DVD not selected

Select DVD mode with Source button.

Disc placed incorrectly

Disc must have mirror side facing you if single sided.

Screen shows "NO

DISC"

Disc damaged or dirty

Inspect disc. If damaged you must discard.

If dirty see "Disc care" page 38.

38.

Picture "Freezes" or breaks up

Disc damaged or dirty.

See "Disc care" page

Certain disc functions

not working.

Disc may not

support required

feature.

Read disc information.

Turn sound "Mute" OFF.

Sound "Mute".

If the TV display or performance fails check the TV in accordance with the following instructions. If the TV still fails to function correctly contact your dealer for assistance.

Remote control does not work

Remote are not in the correct status

Ensure remote is in TV mode by pressing TV button.

If none of the suggestions seem to work, try switching your TV off and then on again. If this

does not work contact our technical helpline

0845 671 0665.

NOTE: The TV must only be repaired by a qualified registered service person. Never

attempt to remove the back cover as the TV has dangerous voltages inside that may cause

fatality or fire.

TECHNICAL SPECIFICATIONS

Specifications of the TV that you have just purchased may vary from the information in this

table due to technical innovations.

TV Specifications

Remote control specifications

derarfnIepyT Control distance 5m Control angle 30 degrees(Horizontal)

AAeziS,V5.1x2seirettaB

Dimensions 60 x204 x32mm

)seirettabtuohtiw(g041thgieW

TV System

Audio System BG / DK / I

Screensize 19”(Diagonal)

Resolution 1366x 768 Pixels(RGB)

Aerial input 75 (unbalanced)

Audio output power 2 x 3W

Power requirements

Power consumption < 25W

Standby power consumption <0.5W

gk3.3thgieW

12V 3.33A

PAL/BG/DK/ I

Wall Mounting

This unit is VESA-Compliant and designed to be wall mounted with a VESACompliant 100mm x 100mm mounting kit. Mount this unit according to the instructions of the wall bracket (not supplied)

1.The stand must first be removed.

2.Place the TV face down on a flat soft surface.

3.Remove the three screws on the back of the TV to release the stand.

4.Use four (M4 x 8) screws to mount the TV on the wall bracket.

100mm

Press the button on the remote control to start the tuning procedure. This process will find all available ATV and DTV channels and store them.

WASTE ELECTRICAL RECYCLING

On 1st July 2007, The Waste Electrical and Electronic Equipment (WEEE) Regulations were implemented in the UK in order to reduce the quantity of electronic waste being sent to landfill and thereby protect our environment.

Marks & Spencer plc has joined a new body - the Distributor Take-Back Scheme (DTS) - which will allow you to deposit your old electrical and electronic items at UK recycling sites, free of charge. To find your nearest recycling site for waste electrical and electronic items, visit www.recyclemore.co.uk and simply type your postcode into the recycling bank locator.

You'll find advice and tips on other aspects of recycling.

Please note all electrical and electronic products and/or packaging now carries a "crossed out wheelie bin" logo to help you identify products that are recyclable.

Marks & Spencer stores will not accept electrical items in stor

efor recycling. Instead, M&S has contributed to the funding of an alternative network of UK recycling facilities as stated above. Store colleagues will however be able to advise you as to the location of recycling facilities in your area.

W2 1NW

Registered No:

214436

(England

andWales)

www

.marksandspencer.com

M&Stechnologycustomerservice

Tel 0845 671 0665

This may be to return it with original packaging to any M&S store (except Outlets and Simply Food stores) along with your receipt. If it’s within 35 days of purchase we will offer an exchange for a new product or a full refund. After 35 days and for the remainder of the guarantee period, we will arrange for the product to be repaired.

Once the tamperproof seal on your technology product is broken, refunds can only be given in accordance with your legal rights. Remember you are not entitled to a refund if you simply change your mind, or if you damage the goods after you buy them.

Should a repair not be possible, we will exchange the product for a new or nearest equivalent product. In the unlikely event of being unable to exchange, we will offer a full refund.

This warranty is only valid within the United Kingdom, Republic of Ireland and/or Channel Islands. This warranty excludes faults caused by accident, neglect, misuse, not following the instructions or normal wear and tear.

This warranty is in addition to your legal rights and supersedes any guarantee or warranty that is with the product.

(copyright) Marks & Spencer plc Marks and Spencer plc PO Box 3339 Chester CH99 9QS

Please retain proof of purchase in case of return. In the unlikely event of a fault please contatct our customer service helpline on 0845 671 0665, who will advise you of the best course of action.

T04/9350/5834

Marks & Spencer MS19112F-LED User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual