Marks & Spencer MS1551DVB, MS1951DVB User Manual

Download

LCD digital colour TV

MS1551DVB

USER GUIDE

LCD Screen

Although the LCD screen is made with high-precision technology and

99.99% or more of the pixels are effective, black dots may appear or

bright points of light (red, blue or green) may appear constantly on the

LCD screen and is not a malfunction.

If you have any problem setting up this Television, trouble getting a

signal or difficulties with the operation of the DVD player.

Please Contact our Helpline where we will be able to assist you.

Call 0845 6710665

HELP

Unit and Accessories Getting Started

Front View Rear View

Remote Control Key Functions Menu Operation

Basic TV operation PICTURE menu options SOUND menu options TIMER menu options FUNCTION menu options SETUP menu options

3 4

4 5-6 7-9 10 10-11 12 13 13 14 15-16

SimpleTroubleshooting Techincal Specifications

17 18

Caution

Safety Information

caution

Caution

The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons.

The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Correct disposal of this Product

This appliance complies with European Safety and Electrical directives

“Correct Disposal of Product” Produced after 13 August 2005. Waste electrical should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

Safety Information

To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below.

Electrical safety

x The TV set should only be connected to a mains supply which matches that stated on

the label on the mains adaptor

x To prevent overload, don't share the same mains supply socket with too many other

items of equipment.

- Do not place any connecting wires where they may be stepped on or tripped over.

- Do not place heavy items, which may damage the leads, on them.

- Hold the Mains plug, not the wires, when removing from a socket.

- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial (if outdoor) and mains adaptor from the supply.

- Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet or moist areas such as Bathrooms, steamy kitchens or near swimming pools.

x Pull the plug out immediately, and seek professional help if:

- the mains plug or cable is damaged

- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture

- anything accidentally penetrates the ventilation slots

- the set doesn't work normally.

- Do NOT remove the safety covers. There are no user serviceable parts inside. You may invalidate the warranty. Qualified personnel must only service this apparatus.

- To avoid battery leakage, remove exhausted batteries from the remote control handset, or when not using for a long period.

- Do NOT break open or throw exhausted batteries on a fire.

Physical safety

x Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet,

but ensure at least 5cm (2") clearance all around.

x Do NOT tap or shake the TV screen, you may damage the internal circuits. Take good

care of the remote control, do not drop.

x To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For

stubborn stains, you may use a damp soft cloth with dilute detergent.

Unit and Accessories

Power cable

USER GUIDE

EASY START GUIDE

USER GUIDE

Unit and Accessories

Source

Help

Quick Start

Guide

Pic Swap

InfoExit

VOL

Picture Sound

-Day

abc def

ghi jkl mno

pqrs tuv wxyz

+Day

DVD Menu

123

456

789

SUB TXT

SD1

SD2

Recording Lists

TV/Radio

TV set

Batteries

Getting Started

VOL

Power

TV/AV

(IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby) LED Indicator: Press POWER to turn on and off,

Press to display the input source menu(see page 11).

Indicator on(RED) Standby mode Indicator on(GREEN) Power on mode

Press to skip through the channels.

Getting Started

POWER SWITCH: Turn on/off the power supply.

TV Signal

Getting Started

REAR CONNECTIONS

Name Function Description

AC POWER IN

HDMI

VGA IN

VGA signal from computer output

Connect to the composite terminal of your DVD/VCR

S-Video IN

Video IN

(AUDIO)L/R IN

PC Audio IN

Headphone

Connect to power supply

SCART

Connect to the HDMI of your DVD or other equipment

Audio signal input for AV

S-Video signal input

Video signal input

PC audio input

Connect it to your headphone or other audio equipment

Connect to antenna or cable source

Common Interface

CI slot

THE TELEVISION MANUFACTURER RECOMMENDS THE USE OF AN OUTDOOR AERIAL SUITABLE FOR RECEPTION OF DIGITAL BROADCASTS

75mm

Remote Control Key Functions

Menu Operation

1. Press VOL+/- to adjust the volume.

2. If you want to switch the sound OFF, press the MUTE

3. You can cancel this function by pressing MUTE or VOL+ button.

Basic TV operation

First time installation

NOTE: When you initially use the TV, you will see the “First Time Installation” menu as below:

TURN ON LCD TV

TURN OFF LCD TV

1.Connect power cable to mains supply and turn on the power by using the “ Switch” at the back

the TV on the right hand side. The standby indicator on the front of the TV will light up in red.

2. Press the

POWER button on the top of the TV or the button on the remote control to

turn on the TV, the indicator will light green.

Press the

POWER button on the top of the TV or the button on the remote control to turn

the TV off into standby mode, the indicator will light red.

Using the CH+/- on the front panel or on the remote control.

Press CH+ to increase channel number

Press CH- to decrease channel number.

Ensure that the aerial is plugged in to the TV, Make sure your Remote is in TV mode (by pressing button), switch on the TV by pressing . You will see the first time installation menu.

Press the button on the remote control to start the tuning procedure. This process will find all available ATV and DTV channels and store them.

By pressing the Quick Start button the first time installation can be recalled at any time.

Press the MENU button to display the main menu.

Use

/ buttons to select menu, and press button to enter the menu.

You can display the input source menu by pressing the Source button on the remote control or the TV/AV button on the TV, press

/ button

to select, and press OK button to confirm.

SCART

CVBS

S-VIDEO

VGA

HDMI

DTV

TIMER

Sleep Timer

OSD Timer

0 Min

30Sec

SOUND

Volume

Sound Mode

Bass

Treble

Balance

Music

SETUP

Country

Auto tuning

Manual tuning

Program Edit

Common interface

FUNCTION

Language

Video Size

Blue Screen

Child Lock

First Time Installation

Reset

English

Auto

Select

Enter

Select

Enter

Select

Enter

Select

Enter

PICTURE

Picture Mode

Contrast

Brightness

Color

Sharpness

Personal

Normal

Colour temperature

Normal

Select

Enter

- You should operate the menu according to the hint on the bottom of the OSD menu.

- The CH+ and CH- buttons on the TV set are used as ɼ and ɽ

buttons on the OSD

menu.

- The VOL+ and VOL- buttons on the TV set are used as ɺ and ɻbuttons on the OSD menu.

1. Use / button to select what you want to adjust in the Picture menu.

2. Press

/ button to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Picture Mode

Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in Picture menu. You may select the picture mode directly by pressing the PICTURE button on the remote control.

Contrast

Adjust the contrast of the picture.

Brightness

Adjust the brightness of the picture.

Colour

Adjust the colour of the picture.

NOTE: This option is invalid in PC mode, and it will be shown in gray.

Sharpness

Select sharpness mode of the picture.

Colour Temperature(in VGA mode)

Select an optimum color temperature mode to suit your eyes for viewing among Normal, Warm and Cold.

DNR

If the broadcast signal received is weak, you can select the DNR option to reduce the video noise level between Off, Low, Mid and High.

In this manual, the OSD (On Screen Display) may be different from your TV's because it is just example to help the TV operation.

PICTURE menu options

PICTURE

Picture Mode

Contrast

Brightness

Colour

Sharpness

Personal

Normal

Off

Normal

Select

Adjust

Colour temperature

DNR

Press the MENU button on the top of your tv or the MENU button on the remote control then use / button to select the picture menu, press to enter the menu. (see picture below).

1. Use / button to select what you want to adjust in the Sound menu.

2. Press

/ button to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

1. Use

/ button to select what you want to

adjust in the Timer menu.

2. Press

/ button to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Volume

Adjust the volume.

Sound Mode

Select the type of sound which best corresponds to your listening requirements by selecting Sound Mode in Sound menu. You may select the Sound mode directly by pressing the SOUND button on the remote control.

Bass

Adjust the level of the lower-pitched sounds.

Treble

Adjust the level of the higher-pitched sounds.

Balance

Adjust the audio output between left and right speakers.

Sleep Timer

Select the sleep time to put automatically the TV in standby mode. Timer can be selected as 15,30,45,60, 75,90,105,120 and 0 Min(Off). You may select the sleep time by pressing SLEEP repeatedly.

OSD Timer

You can select the time when the OSD display on the screen such as: 5Sec,10Sec,15Sec,20Sec,25Sec, 30Sec.

SOUND menu options

TIMER menu options

SOUND

Volume

Sound Mode

Bass

Treble

Balance

Music

TIMER

Sleep Timer

OSD Timer

0 Min

30Sec

Select

Adjust

Select

Adjust

NOTE: The Treble and bass levels can only be adjusted when the sound setting Personal is selected.

Press the MENU button on the top of your tv or the MENU button on the remote control then use / button to select the sound menu, press to enter the menu. (see picture below).

Press the MENU button on the top of your tv or the MENU button on the remote control then use

button to select the Timer menu, press to enter the menu. (see picture below).

FUNCTION

Language

Video Size

Blue Screen

Child Lock

First Time Installation

Reset

English

Full Screen

1. Use / button to select what you want to adjust in the Function menu.

2. Press

/ button to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Language

Select the language of the OSD menu.

Video Size

Select the screen display mode. Note: The available aspect modes may differ from one input source to another.

Blue Screen

To turn on/off the function, when the function is turned on, the screen background will turn blue at very weak or no signal condition.

Child Lock

Press

button to enter the Child Lock menu as below: Child Lock: Turn on/off the child lock function. Key Lock: This option allows you to lock the buttons on the TV set, so that a child may not accidentally change your viewing preferences.

Change PIN Code: Set pin code.

Old PIN Code: The default is no password, press

OK to confirm. If the Pin code has been changed you must

New PIN Code: Enter the new password. Enter Again: Enter the new password and press

OK to complete the change.

FUNCTION menu options

Select

Adjust

Child Lock

Key Lock

Change PIN Code

Off

Select

Adjust

Change PIN Code

Old PIN Code

New PIN Code

Enter Again

Select

Delete Input Confirm

0 9OK

If you turn on the Child Lock function, and set the PIN Code, you have to enter the program edit option in Menu Setup (page 15) to lock one or more channels. If the quick start button is pressed you will also be prompted for the child lock Password.

Note: If the pin code is changed and the number forgotten or lost, please call the helpline.

Reset

Press

button to reset the setup.

Delete Input Enter

0 9OK

PIN Code:

enter the present code.

Press the MENU button on the top of your tv or the MENU button on the remote control then use / button to select the Function menu, press to enter the menu. (see picture below) .

1. Use / button to select what you want to adjust in the Setup menu.

2. Press

/ button to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Country

This option allows you to select the country.

Auto Tuning

Press

button to start auto tuning.

Note: Before you perform Auto Tuning, you must choose the country where you are by selecting COUNTRY option.

Manual Tuning

Note: Before you perform Manual Tuning, you must choose the country where you are by selecting Country option.

SETUP menu options

(used in TV/DTV source)

Manual Tuning

Program

Sound System

Colour System

Program Lable

AFT

Manual Search

PAL

Off

471.43MHz

Select

Adjust

Input

SETUP

Country

Auto Tuning

Manual Tuning

Program Edit

Common Interface

Select

Adjust

Auto tuning

Press OK key to start

Enter

Return

Program: Select the current channel. Sound System: Select a corresponding sound system(In the UK select Pal I ). Color System: Select a corresponding color system. Program Label: Name the current channel, you can also rename the program which you have named. Press

button to enter, and press / button to select the position, then press /

button or 0-9 button to enter the character, press OK button to confirm.

AFT: Due to weak signals or a wrong antenna configuration, some of the channels may not be turned to the best reception condition. AFT function allows you to fine tune channel selected. Manual Search: Press

/ button to search.

0-9

Manual Tuning in TV mode

Press the MENU button on the top of your tv or the MENU button on the remote control then use / button to select the setup menu, press

to enter the menu. (see picture below).

Manual Tuning

Channel

Start Search

Service Found

Signal Quality

Signal Strength

Frequency

Begin

474.00MHz

Select

Enter

Channel: Select the current channel. Start Search: press

button to begin searching, and it will display “Search”, after a few second,

it will display “Finished”.

Manual Tuning in DTV mode

Common interface(For DTV mode)

Please contact your "Pay per View" provider e.g. Setanta who can supply a viewing card and cam unit and instructions for their use.

Favorite(in DTV mode):

Use

/ button to select the channel, and press

the green button on the remote control to set, and there

will be a “ ” on the channel, press the green button again

to cancel. Such as channel 2.

Delete: Delete the channel, the channel will be deleted.

Lock: Lock the channel, you have to enter the code(PIN code in

Child Lock menu--Function menu) to view the channel.

Use

/ button to select the channel, and press the

blue button on the remote control to set, and there will be a

“ ” on the channel, press the blue button again to cancel.

Such as channel 5 and 6.

Program Edit

Channel list

Flags

1.BBC1

2.BBC2

3.ITV1

4.CHANNEL 4

5.FIVE

6. ITV2

7.BBC3

Favorite Delete Lock

TSimple roubleshooting

Simple Troubleshooting

SYMPTOM REMEDY

GENERAL

Dead. No LED Lit No power to the TV.

Check all connections to the TV.

Dead Led lit red Set still in standby.

Press either the Power button or on the Remote control.

No signal.

Blue screen.

Incorrect source selected.

Press Source button to select correct source.

Noisy, snowy,

ghosting picture

(TV)

Poor aerial signal.

If using an indoor aerial, try moving the

aerial. Check aerial connections.

Volume set too low.

Check volume settings.

No sound

External leads not connected "if used".

Check all external leads are connected.

Turn sound "Mute" OFF.

Sound "Mute".

If the display or performance fails check the TV in accordance with the following instructions. If the TV still fails to function correctly contact your dealer for assistance.

Remote control does not work

Remote are not in the correct status

Ensure remote is in TV mode by pressing TV button.

Techincal Specifications

AC 100-240V 50/60Hz 60WPower Consumption

2.50kgWeight

TVSystem PAL/SECAM, BG/DK/I Screen size 15"(diagonal) Resolution 1440x900 pixels Aerial input 75

(unbalanced)

Audio output power

Remote control

Type Control distance Control angle Batteries Dimensions Weight

infrared 5m 30° (horizontal) 2 x 1.5 V, size AA 48 x 168 x24 mm 70 g (without battery)

2x6 W

W2 1NW

Registered No:

214436

(England

andWales)

www

.marksandspencer.com

M&Stechnologycustomerservice

Tel 0845 671 0665

(copyright) Marks & Spencer plc Marks and Spencer plc PO Box 3339 Chester CH99 9QS

Your Guarantee

Your Marks and Spencer product* is covered by a guarantee for 2 years from the date of purchase. TV’s with larger screens (26” or above) have a 5 year guarantee. In either case, you should retain your till receipt in order to validate the date of purchase.

If you simply change your mind about your purchase we are happy to exchange or refund items that still have their tamper proof seal intact, along with a receipt and within 35 days of purchase.

Once the tamperproof seal on your technology product is broken, refunds can only be given in accordance with your legal rights. Remember your legal rights do not extend to cover any returns or refunds if you simply change your mind, or if you damage the goods after you buy them.

If a fault develops during this period then please call our customer service centre on 0845 6710665, who will advise you on the best course of action.This could be technical support from our helpline, arranging for repair or outlining the process for returning the product. Should a repair not be possible, we will exchange the product for new or nearest equivalent product. In the unlikely event of being unable to exchange we will offer a full refund.

Should the advice be to return the product to one of our UK/Channel Island stores (excluding Outlets and Simply Food Stores) then the helpline will also issue you with a “Returns Authorisation Number” (RAN) to ensure a faster process once you are in store.

This Guarantee is only valid within the United Kingdom, Republic of Ireland and/or Channel Islands. This warranty excludes faults caused by accident, neglect, misuse, not following the instructions or normal wear and tear. This guarantee is in addition to your legal rights and supersedes any guarantee or warranty that is with the product.

Guarantee does not apply to Software and technology accessories.

T04/9350/1967N

Marks & Spencer MS1551DVB, MS1951DVB User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual