Marksman RELOADR RMM-100-005 User Manual

USER GUIDE

MARKSMAN

Thanks for purchasing the MARKSMAN Digital Reloading

ON/OFF

TARE

MODE CAL

Radio Frequency

Interference

Radio Frequency

Interference

Scale! This User Guide is designed to get you up and
running quickly with your scale. Scales are precision
instruments and require proper care and skill to get the
best results. If you have questions or need support, visit
us at http://www.truweigh.com/support or scan the QR
Code on the back of this manual using your smartphone.

What’s In The Box

User Guide

Two AAA
Batteries

Powder Pan

& 100g Weight

MARKSMAN Digital

Scale with cover

Key Descriptions

ON/OFF - Turns the scale ON or OFF.

MODE - Changes the weighing unit.

ZERO/TARE - Zero’s the scale. Also subtracts the weight of

an empty container (see Tare Function).

CAL - Enter calibration mode. See Calibration.

Stability

Weighing

Indicator

Center of Zero

Indicator

Unit

Weight

Stability Indicator: Indicates

that the reading is stable.

Center of Zero Indicator:

Indicates that the scale is

zero’d and ready for the next

weighing.

Weighing Your First Item

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Radio Frequency

Interference

1. Press the ON/OFF key to
turn the scale on.

2. Place the item on the center
of the weighing platform.

3. Wait for the stability
indicator to display, then
take your reading from the
display. You can press the
MODE key to convert between weighing units.

4. The scale’s auto-o function will turn the scale o
after 3 minutes of inactivity or you can press the

ON/OFF key to turn the scale o.

Disabling The Auto-Off Feature

This scale has an auto-o feature that will power o the
scale after 3 min of inactivity. To disable the auto-o:

1. Press and hold the MODE key until the display
shows “AUOFF”.

2. The auto-o is now disabled and the scale will

remain on until manually powered o. The auto-o

will be restored the next time you turn the scale on.

Things To Avoid

Unlevel Surfaces

Air Currents

Radio Frequency

Interference

Vibration

High Humidity

Extreme Temps

Tare Function

TARE

The Tare function allows you to subtract the weight of a
container so that the display only shows the weight of the
contents.

Place an empty tray

or container on the
platform and wait for
the stability indicator.

Press the Z/T key

to subtract the

container’s weight.

Add items to the

container to see their

weight on the display.

NOTE: The weight of the container will subtract from
the available capacity and will leave a negative value
on the display once the weight is removed. Press Z/T
again to return the display to zero.

Accuracy

Your scale comes calibrated from the factory and most
users wont need to calibrate their scale for a long time.
You should check your scale’s accuracy periodically using
the included calibration weight and perform calibration if
necessary.

NOTE: Only use trusted calibration weights.
Household items such as bottles and cans with
weights printed on the side are not suitable for
checking accuracy as these values are approximate
and don’t include the container weight (Net Weight).

Calibration

Calibration adjustment is permanent and
should only be performed using accurate
calibration weights that match the
requirements for your scale (see the chart on
back). Do not use coins or other household
items to calibrate.

1. Prepare the 100g weight.

2. Find a at and level surface to perform calibration
and let the scale adjust to room temperature.

3. Press ON/OFF to turn the scale on and wait for the
scale to stabilize.

4. Press the CAL key. The display will show ‘CAL’.

5. Make sure nothing is on the platform then press

CAL to conrm the zero point.

6. The display will then ash the required calibration
weight.

7. Place the required calibration weight on the center
of the platform.

8. The display will show ‘PASS’ then return to normal
weighing mode. You may

now turn the scale o or

continue weighing.

Six Steps For Success:

This procedure is tailor made for
obtaining maximum accuracy.

1. Warm Up

Press ON/OFF to turn
the scale on. Allow the
scale to warm up for
30 seconds.

2. Initialize

Initialize the scale by
applying and removing
a load of 100 g, four

x4

times in a row.

Note: Readings may be
inconsistent during this step.

3. Calibrate

Calibrate the scale using
the included calibration
weight. Refer to the
calibration instructions in
scale manual.

4. Keep It Centered

When calibrating and
weighing, make sure to
apply items to the
center of the platform.

5. Weigh Promptly

Keep measurements
within 15 seconds to
prevent creep. Never leave
items on the scale
platform for extended
periods of time.

6. Zero

Press the TARE key to
re-zero the scale
between each weighing.

Specications

Model RMM-100-005

Max Capacity 100 g / 3.527 oz / 1500gn / 500 ct

Readability 0.005 g / 0.001 oz / 0.1 gn / 0.05 ct

Weighing
Units

Dimensions

Calibration
Weight

Power 2 x AAA Batteries (included)

Warranty 10 Year Limited Warranty

For more information, including
weighing tips and support, scan

this code with your smartphone

Or visit us online at
truweigh.com/support/

g, oz, gn, ct

Overall: 3.0 in x 4.3 in x 0.8 in
Platform: 2.7 in x 2.7 in
Display: 0.6 in x 1.3 in

100g (included)