
Modell der Elektrolok BR 101 „Starlight“
88675

2
0 - 10 V
max. ± 10V = DC
> 10 V = DC
~ AC
67011
67020 + 67030
67201
67271
Sicherheitshinweise
• ACHTUNG! Funktionsbedingte scharfe Kanten und Spitzen.
• Das verwendete Gleisanschlusskabel darf maximal
2 Meter lang sein.
Safety Notes
• WARNING! Sharp edges and points required for operation.
• The wire used for feeder connections to the track may
only be a maximum of 2 meters / 78 inches long.
Remarques importantes sur la sécurité
• ATTENTION ! Pointes et bords coupants lors du
fonctionnement du produit.
• Le câble de raccordement à la voie utilisé ne doit
en aucun cas dépasser deux mètres.
Veiligheidsvoorschriften
• OPGEPAST! Functionele scherpe kanten en punten.
• De gebruikte aansluitkabel mag maximaal 2 meter lang
zijn.

9
Bei Oberleitungsbetrieb Pfeil beachten!
To operate the catenary system follow the direction
indicated by the arrow.
Pour utilisation de la caténaire tenir compte de la
èche.
Bij gebruik van bovenleiding op pijl letten!
Al funcionar con catenaria obsérvese la echa.
Per esercizio tramite la catenaria osservare la freccia.
Vid kontaktledningsdrift observera pilen.
Ved luftledningsdrift, bemærk pil.

11
Hinweis: Einige Teile werden nur ohne oder mit anderer
Farbgebung angeboten.
Teile, die hier nicht aufgeführt sind, können nur im Rahmen
einer Reparatur im Märklin-Reparatur-Service repariert
werden.
1 Einholmstromabnehmer E209 286
2 Kontaktfeder E268 100
3 Schraube E785 150
4 Beleuchtung E234 501
5 Pufferbohle E234 497
6 Schraube E785 190
7 Schraube E785 550
8 Motor E211 903
9 Motorbürsten 89 891
10 Antriebswelle E552 740
11 Getriebegehäuse vorne E184 011
12 Getriebegehäuse hinten E184 012
13 Drehgestellrahmen / Radsatz E236 702
14 Kupplung E236 736

Gebr. Märklin & Cie. GmbH
Stuttgarter Str. 55 - 57
73033 Göppingen
Germany
www.maerklin.com
235417/1213/Sm1Ef
Änderungen vorbehalten
© Gebr. Märklin & Cie. GmbH
www.maerklin.com/en/imprint.html
Due to different legal requirements regarding electro-magnetic compatibility,
this item may be used in the USA only after separate certication for FCC compliance and an adjustment if necessary.
Use in the USA without this certication is not permitted and absolves us of any
liability. If you should want such certication to be done, please contact us –
also due to the additional costs incurred for this.