Mark Feldstein Blink Bandz User Manual

Blink Time
Contents:
1 x Blink Time Watch 1 x CR2016 Battery Included
Blink Time Watch is touch activated and shows hour, minutes and date when the watch face on front is pressed. Time will be displayed for approximately 5 seconds.
How to set Time and Date
PLEASE NOTE: When a “Y ## is indicated on the watch face it can be skipped over. This is the seconds indicator and will reset automatically when the time is set.
Battery Instructions
1. The battery compartment is located on the back of watch face. It is secured by long metal rods.
2. Using a pen or pin, push each rod through approximately ½-inch so that the battery compartment casing can be removed.
3. Once removed, remove the inner casing from the outer casing to expose the battery. Replace the worn battery with a new CR2016 battery making sure battery polarity (+/-) is as indicated.
4. Replace inner casing into the outer casing. Attach outer casing into the watch body and push each metal rod back through to hold battery compartment in place.
Battery Information
To avoid leakage or explosion, do not put battery in fire. Replace the battery when time or date does not display on watch face when touch activated. Remove battery if consumed or if product is to be left unused for a long period of time. Clean the battery contacts and also those of the devices prior to battery installation.
Warning!
1. This product is NOT a toy. Keep away from young children.
2. The strap is made of 100% silicone. In the very unlikely event that the strap causes irritation to your skin, immediately stop wearing the watch and consult your doctor.
Care Instructions
Blink Time is NOT waterproof or water resistant. It is however splash proof. Surface wash with a slightly damp cloth.
Keep the important information on this packaging for future reference.
Mark Feldstein & Associates, inc.
www.markfeldstein.com
Loading...