Air Hover Hockey Instructions
Take your Air Hover Hockey anywhere! Using the
included strikers, hit the air hover puck across any flat
smooth surface into your opponent’s goal.
Battery Instructions
1. Use a phillips screwdriver to loosen the screw (A) and
open cover of battery compartment on bottom of puck.
2. Insert 2 AAA batteries (not included) making sure
polarity (+/-) is as indicated (B).
3. Replace battery cover and secure with phillips screw.
Operating Instructions
1. To turn on, slide On/OFF switch on bottom of puck to
ON position (C).
2. Place puck on flat, smooth surface such as a table
or floor.
3. Puck will hover over surface and is now ready to be
used for traditional arcade-style Air Hover Hockey, or
use your imagination to create your own games.
4. To turn off, slide ON/OFF switch to OFF position (C).
(B)
AA A BAT TERY
+
(C)
_
AA A BAT TERY
Battery Noti ce: Do not m ix old and new batteries. Do not mix Alkaline, Standard
(Carbon-Zinc) or rechargeable (Nicke l-Cadmium) b atteries. R emove batter ies
when item is not in use for long per iods of time . Replace bo th batteries if puck
stops workin g. To avoid leakage or e xplosion, do not put batteries in fire. Clean
the battery contacts and those on th e device prior to batter y installati on.
Toll free 800-755-6504
_
(A)
+
(B)
AGES
six and
up.